Retailer of Tape, Glues/Adhesives & Dispensers
Order online or call us to place an order.  +1 (908) 248-0427


JVCC PTFE-GC-6 Teflon Glass Cloth Tape [5.4 mil]

  • Quantity
    View Full Pricing Table
    View "Full Pricing Table" below for detailed pricing and additional sizes!
  • Color
  • Roll Size *
    Purchased Most Frequently: 3 in. x 36 yds. (Brown / With Liner) | See Pricing Table below for additional options.
  • Price
    $ Price/photo will update once color & size have been chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

JVCC PTFE-GC-6 Teflon Glass Cloth Tape is a 5.4 mil Teflon™ (PTFE) impregnated fiberglass cloth, consisting of warp and fill yarns, and coated with a high temperature silicone adhesive. It offers excellent electrical, mechanical and chemical properties. Used as a primary insulation/protective barrier in a variety of electrical equipment and heat sealing bars, chute liners, gaskets, bearing surfaces, tabletop covers, guide rails and roll covers. The tape has a low friction surface and is abrasion resistant. It comes either self-wound without a liner or with a release liner (please note though that the 1/2 and 3/4 inch width sizes can only come self-wound).

Image does not show a full 36 yard roll.

* Multiple cases may be shipped per package in order to minimize the charge for shipping.


Technical Information

JVCC PTFE-GC-6 Teflon Glass Cloth Tape
  • Carrier/Backing: polytetrafluoroethylene (PTFE) Teflon impregnated fiberglass cloth
  • Adhesive: silicone   How are adhesives different?
  • Release Liner: paper (optional)
  • Thickness: 8.4 mils (carrier, adhesive) 5.4 mils (carrier)   What is mil thickness?
  • Adhesion: 40 ounces per inch (to stainless steel test panel)
  • Dielectric Breakdown: 6500 volts
  • Service/Operating Temperature: -100°F to 500°F
  • Breaking Strength, Warp/fill: 150/140 pounds per inch
  • Elongation, Warp/fill: 3.0%/4.0%
  • Core: 3" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Alert Roll Sizes/Widths

Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).

Please contact us to inquire about pricing for full-cut widths (e.g. a 6 inch roll cut to exactly 152mm instead of 144mm).

Alternative To

Alternative to...

This product can be used as an alternative to the following products(s):

  • 3M #5453
  • DeWal #134-6
  • St. Gobain #SG25-06
  • Greenbelt #100-6S
  • W.F.Lake #L40S-6
  • Taconic #6085-06
  • Chemfab #350-6S
  • Lanmar #635-6
  • AFC #25006S
PLEASE NOTE: "Alternative" to is NOT the same as equivalent to so please ensure the specifications listed are suitable for your application.
View related products we sell to this item.

PTFE-GC-6 Special Order Sizes


1/2 in. x 36 yds.

Actual Size: 12.7mm wide

Approximately 3 extra business days to ship
PTFE-GC-6/ 053624

Single Roll (1-11 Rolls)

½ Case (12 Rolls)

1 - 2 Cases (24, 48 Rolls)

3+ Cases (72, 96, 120, ... Rolls)

$27.49 2 item minimum








3/4 in. x 36 yds.

Actual Size: 19.0mm wide

Approximately 3 extra business days to ship
PTFE-GC-6/ 0753616

Single Roll (1-7 Rolls)

½ Case (8 Rolls)

1 - 2 Cases (16, 32 Rolls)

3+ Cases (48, 64, 80, ... Rolls)

$39.67 2 item minimum








1 in. x 36 yds.

Actual Size: 25.4mm wide

Approximately 3 extra business days to ship
PTFE-GC-6/ 13612

Single Roll (1-5 Rolls)

½ Case (6 Rolls)

1 - 2 Cases (12, 24 Rolls)

3+ Cases (36, 48, 60, ... Rolls)









1-1/2 in. x 36 yds.

Actual Size: 38.1mm wide

Approximately 3 extra business days to ship
PTFE-GC-6/ 15368

Single Roll (1-3 Rolls)

½ Case (4 Rolls)

1 - 2 Cases (8, 16 Rolls)

3+ Cases (24, 32, 40, ... Rolls)









2 in. x 36 yds.

Actual Size: 50.8mm wide

Approximately 3 extra business days to ship
PTFE-GC-6/ 2366

Single Roll (1-2 Rolls)

½ Case (3 Rolls)

1 - 2 Cases (6, 12 Rolls)

3+ Cases (18, 24, 30, ... Rolls)









3 in. x 36 yds.

Actual Size: 76.2mm wide

Approximately 3 extra business days to ship
PTFE-GC-6/ 3364

Single Roll (1 Roll)

½ Case (2 Rolls)

1 - 2 Cases (4, 8 Rolls)

3+ Cases (12, 16, 20, ... Rolls)









Special Order Policies & Footnotes:

Special Order Policies

  • Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
  • Special order sizes often ship direct from our supplier so will not arrive together with stocked products.

Special Order Minimums

  • Minimum requirements apply because a size may be non-stock or if special setup is required to cut rolls to your desired custom width.
  • Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).
JVCC PTFE-GC-6 Teflon Glass Cloth Tape [5.4 mil]
Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Shopping Cart Summary

Newsletter Signup

Sign up today to be notified of upcoming deals and exclusive offers!

Adhesive Tape Blog
Video Resource Library
How-To Resource Articles
See also
Electrical Tapes
Tapes for Scrapbooking