'Kensington K33821NA' is out of stock and not currently available for purchase on the site.
Perfect as a replacement or an additional power supply, the 100W USB-C GaN Power Adapter delivers high-speed charging in a compact, portable package. A great companion to Kensington bus-powered USB-C mobile hubs and docks, MacBooks, iPads, Surface devices, and more. Includes a 2 meter (6 foot) USB-C cable with cable management; a foldable plug; and GaN technology for cooler, faster, more efficient charging. From Kensington, trusted for quality, safety, and performance for more than 35 years.
Features & Benefits
- The 100W USB-C power supply is perfect as a replacement or an additional power adapter.
- High-speed charging delivers the power you need, when you need it.
- Designed to work with Kensington bus-powered USB-C mobile hubs and docks, MacBooks, iPads, Surface devices, and more.
- Includes a 2 meter (6 foot) USB-C to USB-C cable for flexible use. Includes cable management.
- Compact design with foldable plug makes this power supply ready for travel.
- By leveraging gallium nitride (GaN) technology, this adapter produces less heat, enables faster charging at higher voltages, can be made smaller, and lasts longer than traditional adapters.
- Meets or exceeds Kensington’s strict standards for quality, safety, and performance.
Kensington USB-C GaN Power Charger 100W (K33821NA)
- USB Type: C
- Country of Origin: Vietnam
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Question & Answers
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils