Mueller Stickum Grip Adhesive
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
NOTE: Federal regulations prohibit the shipment of restricted products (aerosol cans, flammable liquids, etc.) by air so please only choose UPS Ground or Surepost as your shipping method if including this product in your order. We can not export this product outside the continental U.S. for this reason.
BACKORDER NOTE *** orders can be placed for backordered items at any timeItem is expected in approximately 10 day(s)
Product Description
Mueller Stickum Grip Spray is a skin-safe adhesive spray that can be used to increase grip on hands or sports equipment in wet or dry environments. It is ideal for use on baseball bats, hockey sticks, tennis rackets, football gloves, footwear, vaulting poles, and even directly on fingertips to improve grip by leaving a tacky layer on the sprayed surface. When finished with use, remove by simply washing with soap and warm water. Available in 4 ounce aerosol cans.
Application Instructions
- To Apply: Hold can upright. Spray approximately 5-inches from fingertips, hands, or equipment. Rub hands together if applicable. Restore tack if hands become dirty with water. Reapply as needed.
Made in the U.S.
* Multiple cases may be shipped per package in order to minimize the charge for shipping.
Stickum Standard sizes
| CAN SIZE | ITEM # |
CANS PER CASE |
QUANTITY ORDERING |
PRICE PER CAN |
PRICE PER CASE |
|---|
4 fluid ounce spray | 490701 | 12 | Single Can (1-11 Cans) 1 Case (12-23 Cans) 2 Cases (24-35 Cans) 3+ Cases (>= 36 Cans) | $7.39 $12.99 $6.48 $12.99 $6.38 $12.99 $6.28 $12.99 | N/A $77.76 $155.88 $76.56 $155.88 $75.36 $155.88 |
Question & Answers
User Reviews
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils