Shurtape Heavy-Duty Grade Packaging Tape (HP-500)

Print Page
4 Reviews


Ask a Question 
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
    Clear-
    Tan-
  • Size
    Purchased Most Frequently: 3 in. x 55 yds. (Clear)
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

Shurtape HP-500 Heavy-Duty Grade Packaging Tape is a premium-grade biaxially oriented polypropylene film (BOPP) packaging tape. It features one strip sealing and is extremely tough for the most demanding manual or automatic packaging applications. It has a superior pressure sensitive rubber adhesive which offers excellent quick grab with aggressive holding power for dependable carton closure. Shurtape HP 500 is ideally suited for heavy, bulky, carton sealing in high stress applications and extreme handling conditions (recommended for overstuffed or under filled cartons and recouperage). Features include: aggressive quick stick, an instant permanent bond to a wide range of substrates and surfaces, special release coating for consistent, low force unwind off the roll and performs reliably to the core for efficient tape consumption. Used for packaging, bundling, repairing cartons, and for paper and film bags. Adheres well to corrugated cartons, paper, film and a variety of other substrates. Country of Origin: United States.

 

Technical Information

Shurtape Heavy-Duty Grade Packaging Tape (HP-500)
  • Standards Met: ASTM D 1974-98 (2003); ASTM D 5486M-12, Type III; CID A-A-1684C; FDA Indirect Contact CFR 21, 175.105; FDA Indirect Contact CFR 21, 177.1520
  • Carrier/Backing: 50 micron biaxially-oriented, cast polypropylene (BOPP) film
  • Adhesive: synthetic rubber resin   How are adhesives different?
  • Thickness: 3 mils (carrier, adhesive)   What is mil thickness?
  • Adhesion: 58 ounces per inch (to stainless steel test panel)
  • Adhesion to Backing: 6 ounces per inch
  • Tensile Strength: 42 pounds per inch (longitudinal) 74 pounds per inch (transverse)
  • Service/Operating Temperature: -20°F to 150°F
  • Application Temperature: 35°F to 110°F
  • Elongation: 150%
  • Core: 3" diameter
  • Holding Power to Fiberboard: 30,000+ minutes
  • Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Download Datasheets

The following downloads are available for this product:

Download Safety Data SheetDownload Technical Data Sheet
Alternative To

Alternative to...

This product can be used as an alternative to the following products(s):

  • 3M #375
PLEASE NOTE: "Alternative" to is NOT the same as equivalent to so please ensure the specifications listed are suitable for your application.
View related products we sell to this item.

HP-500 Standard sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

2 in. x 55 yds.

Actual Size: 48mm x 50m

HP-500/ 25536

Single Item (1-35 Items)

1 - 4 Cases (36-179 Items)

5 - 9 Cases (180-359 Items)

10+ Cases (>= 360 Items)

$8.15

$7.10
a 13% discount

$6.99
a 14% discount

$6.87
a 16% discount

N/A

$255.60

$251.64

$247.32

2 in. x 55 yds. / 6-pack

Actual Size: 48mm x 50m / 6-pack

HP-500/ 2556P6

Single Item (1-5 Items)

1 - 4 Cases (6-29 Items)

5 - 9 Cases (30-59 Items)

10+ Cases (>= 60 Items)

$45.73 $49.74

$42.61
a 7% discount

$41.90
a 8% discount

$41.19
a 10% discount

N/A

$255.66

$251.40

$247.14

3 in. x 55 yds.

Actual Size: 72mm x 50m

HP-500/ 35524

Single Item (1-23 Items)

1 - 4 Cases (24-119 Items)

5 - 9 Cases (120-239 Items)

10+ Cases (>= 240 Items)

$11.26

$10.04
a 11% discount

$9.88
a 12% discount

$9.71
a 14% discount

N/A

$240.96

$237.12

$233.04

HP-500 Special Order Sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

2 in. x 1000 yds. (clear)

Actual Size: 48mm x 914m

Approximately 10 extra business days to ship
HP-500/ 21000

UPC = 140074079318
6

Single Item (1-5 Items)

1 - 4 Cases (6, 12, 18, ... Items)

5 - 9 Cases (30, 36, 42, ... Items)

10+ Cases (60, 66, 72, ... Items)

1 case minimum

$100.02
a 6% discount

$98.35
a 8% discount

$96.69
a 9% discount

---

$600.12

$590.10

$580.14

3 in. x 1000 yds. (clear)

Actual Size: 72mm x 914m

Approximately 15 extra business days to ship
HP-500/ 31000

UPC = 140074011691
4

Single Item (1-3 Items)

1 - 4 Cases (4, 8, 12, ... Items)

5 - 9 Cases (20, 24, 28, ... Items)

10+ Cases (40, 44, 48, ... Items)

1 case minimum

$150.00
a 6% discount

$147.50
a 7% discount

$145.00
a 9% discount

---

$600.00

$590.00

$580.00

   Please Read

Special Order Policies

  • Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
  • Special order sizes often ship direct from our supplier so will not arrive together with stocked products.

Special Order Minimums

  • Minimum requirements apply because a size may be non-stock.
  • Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).

Question & Answers

User Reviews

[ viewing reviews 1 through 4 of 4 total ]
CP
clanton p. Verified Buyer Apr 15, 2020
Shurtape HP-500 Heavy Duty Grade
Shurtape HP-500 Heavy-Duty Grade Packaging Tape
It holds every part of the box inplace
EE
Eagle E. Verified Buyer Apr 18, 2019
Very nice product!!!
Shurtape HP-500 Heavy-Duty Grade Packaging Tape
Very nice product!!!
TB
Timothy B. Verified Buyer Apr 09, 2018
Nice heavy duty packing tape
Shurtape HP-500 Heavy-Duty Grade Packaging Tape
Nice heavy duty packing tape. Don't need as much taping with this tape for heavy doublewall box shipments. Only drawback is it's too thick to work with the shurtape folded edge dispensing gun with the actual edge folding-just pops out from the folder part, but it works well without folding the edge.
F
FD Verified Buyer Aug 17, 2016
Premium Packing Tape
Shurtape HP-500 Heavy-Duty Grade Packaging Tape
This tape works great. Strong, sticky, consistent. One strip every time, even on boxes that come in a bit beat up and need fixing. We use it every day on boxes weighing up to 60 lbs. For the best box sealing it has to be Shurtape or 3M. We never go with the cheap stuff. The cheap stuff always costs more eventually with repacking, retaping, & insurance claims from UPS/FedEx.
Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Continue Shopping
EMAIL/SMS SIGN-UP
 +1
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles