3M Scotch 23

3M Scotch 23 Rubber Splicing Tape

  • Quantity
    View Full Pricing Table
    View "Full Pricing Table" below for detailed pricing and additional sizes!
  • Color
    Black
  • Roll Size *
    3/4 in. x 30 ft. *19mm wide
  • Price
    $ Price/photo will update once color & size have been chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

3M Scotch 23 Rubber Splicing Tape is a 30-mil, premium-grade, highly conformable, rubber splicing tape. The self-fusing tape has a special polyester liner, which will not stick to the tape upon unwind. 3M Scotch 23 has greater physical and electrical properties that are unaffected by the degree of stretch. This tape is highly resistant to split, crack and flag when exposed to indoor or outdoor environments. It is designed to splice and terminate cables whose emergency overload temperatures can reach 266°F (130°C).

3M Scotch 23 Rubber Splicing Tape is a non-vulcanizing, shelf-stable, self-fusing EPR (Ethylene Propylene Rubber), high-insulating voltage tape, which has a snakeskin liner that is easily removed as the tape is applied. It is compatible with synthetic cables insulations and paper insulations cables. 3M Scotch 23 can be used as an insulation for low-voltage applications as well as an insulation for splices up to 69,000 volts.

3M Scotch 23 Rubber Splicing Tape is compatible with all solid dielectric cable insulation including Polyethylene (high and low density), Cross-linked Polyethylene (XLP), Polyvinyl Chloride (PVC), Butyl Rubber, Ethylene Propylene Rubber (PVC), and Oil-based rubber.

Features and Benefits

  • Rubber resin provides excellent adherence to irregular surfaces
  • Temperature rated for continuous adhesion to 194°F (90°C)
  • Self-fusing, ethylene propylene rubber backing, and highly conformable, rubber-resin adhesive
  • Special polyester liner keeps tape protected and clean during application

Applications

  • Primary electrical insulation for splicing cable from 600 volts through 69,000 volts on all solid dielectric cables
  • Primary insulation for building stress cones on cables up to 35,000 volts on all solid dielectric cables
  • Jacketing on high-voltage splices and terminations
  • Moisture sealing electrical connections
  • Bus bar insulations
  • End sealing high-voltage cables

 

Technical Information

3M Scotch 23 Rubber Splicing Tape
  • Adhesive: rubber resin, thermosetting rubber   How are adhesives different?
  • Carrier/Backing: ethylene propylene rubber (EPR)
  • Thickness: 30 mils (carrier, adhesive)   What is mil thickness?
  • Tensile Strength: 8 pounds per inch (longitudinal)
  • Dielectric Strength: 800 volts
  • Service/Operating Temperature: up to 194°F
  • Standards Met: ASTM D-4388 type 1, 2 & 3 | HH-I-3825B, RoHS 2002/65/EC Compliant
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Alert Roll Sizes/Widths

Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).

Download Datasheets

Download Datasheets

The following downloads are available for this product:

Download 3M Electrical Tapes GuideDownload Technical Data Sheet

23 Special Order Sizes

ROLL SIZEITEM # ROLLS PER CASE QUANTITY ORDERING PRICE PER ROLL PRICE PER CASE

3/4 in. x 30 ft.

Actual Size: 19mm wide

Approximately 12 extra business days to ship
23/ 0753020

Single Roll (1-19 Rolls)

1 - 4 Cases (20, 40, 60, ... Rolls)

5 - 9 Cases (100, 120, 140, ... Rolls)

10+ Cases (200, 220, 240, ... Rolls)

1 case minimum

$16.61

$16.33

$16.05

---

$332.20

$326.60

$321.00

Special Order Policies & Footnotes:

Special Order Policies

  • Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
  • Special order sizes often ship direct from our supplier so will not arrive together with stocked products.

Special Order Minimums

  • Minimum requirements apply because a size may be non-stock.
  • Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).

Shop Related Categories

Related Products (Similar Item Or Complementary Item)

What Do Customers Ultimately Buy After Viewing This Item

Customers Who Bought This Item Also Bought These At The Same Time

3M Scotch 23 Rubber Splicing Tape
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Shopping Cart Summary
Recently Viewed Products

Newsletter Signup

Sign up today to be notified of upcoming deals and exclusive offers!

Adhesive Tape Blog
Video Resource Library
How-To Resource Articles
See also
Electrical Tapes
Tapes for Scrapbooking