JVCC DC-WGT-01 Double Coated Window Glazing Tape
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
ITEMS ON BACKORDER: *** orders can be placed for backordered items at any timeThe following are expected in approximately 11 day(s):
Color/Size: BLACK 1/16 in. thick foam x 1/4 in. x 150 ft.
Product Description
JVCC DC-WGT-01 Window Glazing Tape is a double-sided PE foam tape which is designed specifically for window glazing and is American Architectural Manufacturers Association (AAMA) certified. Glazing tape is typically used during the installation process to prevent wind and water from entering by creating the inside seal between the insulated glass panel and the window sash/box. Other uses include mounting of emblems, nameplates, plastic strips and mirrors.
The foam used for JVCC DC-WGT-01 Window Glazing Tape is a high performance closed cell cross-linked polyethylene which is coated on both sides with a high-performance solvent-based acrylic adhesive. The adhesive system is formulated to bond with glass, wood, and aluminum substrates with quick stick, high peel adhesion, and a very good strength.
JVCC DC-WGT-01 double-sided window glazing tape has outstanding resistance to weather needed for outdoor applications. It has a superior seal against dust and moisture due to its flexible, soft foam. The easy peel poly liner allows for continuous and complete liner removal during window glazing applications (creating the seal between the insulated glass panel and window sash which helps prevent air and water leakage). Glazing tape is a cleaner and more convenient option over glazing putty and other messy or more difficult to apply products.
Application Guidelines
- Clean debris from from the surface with a clean, damp rag. The surface should be completely dry before proceeding with applying the tape.
- Without over-stretching the tape, apply the adhesive side to the surface.
- Use a weighted roller to ensure the bond from the tape to the surface and cut as needed, leaving a minimal gap. Make sure not to stretch the glazing tape around corners which can result in thinning on the outside and may create a bulge on the inside. Avoid overlapping the foam tape as it will not compress enough to avoid gaps.
- For small gaps, use a silicone or other sealant that will work with the JVCC DC-WGT-01 Window Glazing Tape product.
- Pull back a short length of the liner to create a tab.
- Center and install glass
- Remove the liner by the tabs and press the glass into the foam tape.
- Allow 24 to 72 hours for full adhesion strength.
- Make sure to store tape at room temperature and apply on a not-cold surface.
Warning: This product can expose you to chemicals including Toluene, which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.
Technical Information
JVCC DC-WGT-01 Double Coated Window Glazing Tape
- Adhesive: solvent-based acrylic How are adhesives different?
- Carrier/Backing: closed cell cross-linked polyethylene foam
- Release Liner: blue polyolefin film
- Thickness: 4 mils (liner) What is mil thickness?
- Service/Operating Temperature: -22°F to 212°F
- Peel Adhesion (1/16" thick): 73 ounces per inch
- Peel Adhesion (1/8" thick): 46 ounces per inch
- Density (1/16" thick): 4 pounds per cubic foot
- Density (1/8" thick): 2 pounds per cubic foot
- Standards Met: AAMA-certified testing and approved
- Core: 3" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Roll Sizes/Widths
Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
DC-WGT-01 Standard sizes
| ROLL SIZE | ITEM # |
ROLLS PER CASE |
QUANTITY ORDERING |
PRICE PER ROLL |
PRICE PER CASE |
|---|
1/16 in. thick foam x 1/4 in. x 150 ft. (black) | DC-WGT-01/ 006025B | 48 | Single Roll (1-47 Rolls) 1 Case (48-95 Rolls) 2 Cases (96-143 Rolls) 3+ Cases (>= 144 Rolls) | | |
1/16 in. thick foam x 3/8 in. x 150 ft. | DC-WGT-01/ 006038 | 32 | Single Roll (1-31 Rolls) 1 Case (32-63 Rolls) 2 Cases (64-95 Rolls) 3+ Cases (>= 96 Rolls) | | |
1/16 in. thick foam x 1 in. x 150 ft. | DC-WGT-01/ 0061 | 12 | Single Roll (1-11 Rolls) 1 Case (12-23 Rolls) 2 Cases (24-35 Rolls) 3+ Cases (>= 36 Rolls) | | |
1/8 in. thick foam x 1/4 in. x 75 ft. (black only) | DC-WGT-01/ 013025 | 48 | Single Roll (1-47 Rolls) 1 Case (48-95 Rolls) 2 Cases (96-143 Rolls) 3+ Cases (>= 144 Rolls) | | |
1/8 in. thick foam x 3/8 in. x 75 ft. (black only) | DC-WGT-01/ 013038 | 32 | Single Roll (1-31 Rolls) 1 Case (32-63 Rolls) 2 Cases (64-95 Rolls) 3+ Cases (>= 96 Rolls) | | |
1/8 in. thick foam x 1/2 in. x 75 ft. (black only) | DC-WGT-01/ 01305 | 24 | Single Roll (1-23 Rolls) 1 Case (24-47 Rolls) 2 Cases (48-71 Rolls) 3+ Cases (>= 72 Rolls) | | |
1/8 in. thick foam x 5/8 in. x 75 ft. (black only) | DC-WGT-01/ 013063 | 20 | Single Roll (1-19 Rolls) 1 Case (20-39 Rolls) 2 Cases (40-59 Rolls) 3+ Cases (>= 60 Rolls) | | |
1/8 in. thick foam x 3/4 in. x 75 ft. (black only) | DC-WGT-01/ 013075 | 16 | Single Roll (1-15 Rolls) 1 Case (16-31 Rolls) 2 Cases (32-47 Rolls) 3+ Cases (>= 48 Rolls) | | |
1/8 in. thick foam x 1 in. x 75 ft. (black only) | DC-WGT-01/ 0131 | 12 | Single Roll (1-11 Rolls) 1 Case (12-23 Rolls) 2 Cases (24-35 Rolls) 3+ Cases (>= 36 Rolls) | | |
Nominal Tape Widths vs Actual Widths
Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:
- 1" Nominal width = 15/16" (24mm) Actual width
- 2" Nominal width = 1-7/8" (48mm) Actual width
- 3" Nominal width = 2-13/16" (72mm) Actual width
Note that tape rolls are NOT guaranteed to be splice-free.
DC-WGT-01 Special Order Sizes
| ROLL SIZE | ITEM # |
ROLLS PER CASE |
QUANTITY ORDERING |
PRICE PER ROLL |
PRICE PER CASE |
|---|
1/16 in. thick foam x 1/4 in. x 150 ft. (white) Approximately 4 extra business days to ship | DC-WGT-01/ 006025 | 48 | Single Roll (1-47 Rolls) 1 Case (48 Rolls) 2 Cases (96 Rolls) 3+ Cases (144, 192, 240, ... Rolls) | 1 case minimum $5.61 $5.46 $5.02 | |
1/16 in. thick foam x 1/2 in. x 150 ft. Approximately 4 extra business days to ship | DC-WGT-01/ 00605 | 24 | Single Roll (1-23 Rolls) 1 Case (24 Rolls) 2 Cases (48 Rolls) 3+ Cases (72, 96, 120, ... Rolls) | 1 case minimum $10.84 $10.57 $9.72 | |
1/16 in. thick foam x 5/8 in. x 150 ft. Approximately 4 extra business days to ship | DC-WGT-01/ 006063 | 20 | Single Roll (1-19 Rolls) 1 Case (20 Rolls) 2 Cases (40 Rolls) 3+ Cases (60, 80, 100, ... Rolls) | 1 case minimum $13.43 $13.09 $12.05 | |
1/16 in. thick foam x 3/4 in. x 150 ft. Approximately 4 extra business days to ship | DC-WGT-01/ 006075 | 16 | Single Roll (1-15 Rolls) 1 Case (16 Rolls) 2 Cases (32 Rolls) 3+ Cases (48, 64, 80, ... Rolls) | 1 case minimum $16.04 $15.65 $14.38 | |
1/16 in. thick foam x 7/8 in. x 150 ft. Approximately 4 extra business days to ship | DC-WGT-01/ 006088 | 14 | Single Roll (1-13 Rolls) 1 Case (14 Rolls) 2 Cases (28 Rolls) 3+ Cases (42, 56, 70, ... Rolls) | 1 case minimum $18.66 $18.20 $16.74 | |
1/16 in. thick foam x 1-1/2 in. x 150 ft. Approximately 4 extra business days to ship | DC-WGT-01/ 00615 | 8 | Single Roll (1-7 Rolls) 1 Case (8 Rolls) 2 Cases (16 Rolls) 3+ Cases (24, 32, 40, ... Rolls) | 1 case minimum $33.78 $32.95 $32.95 | |
1/16 in. thick foam x 2 in. x 150 ft. Approximately 4 extra business days to ship | DC-WGT-01/ 0062 | 6 | Single Roll (1-5 Rolls) 1 Case (6 Rolls) 2 Cases (12 Rolls) 3+ Cases (18, 24, 30, ... Rolls) | 1 case minimum $42.55 $41.49 $38.17 | |
Special Order Policies & Footnotes:
Special Order Policies
- Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
- Special order sizes often ship direct from our supplier so will not arrive together with stocked products.
Special Order Minimums
- Minimum requirements apply because a size may be non-stock.
- Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils