JVCC FELT-06 Polyester Felt Tape [1mm thick felt]
For a darker brown felt please see JVCC's ACF-06 product. Please use our Contact Us page to inquire about pricing and minimums for both custom dyed felt or a width not currently displayed.
FELT-06 Standard sizes
| ROLL SIZE | ITEM # |
ROLLS PER CASE |
QUANTITY ORDERING |
PRICE PER ROLL |
PRICE PER CASE |
|---|
3/4 in. x 15 ft. (Black & Dark Brown) *shorter 15 ft. length | FELT-06/ 07515 | 48 | Single Roll (1-47 Rolls) 1 - 4 Cases (48-239 Rolls) 5 - 9 Cases (240-479 Rolls) 10+ Cases (>= 480 Rolls) | | |
3/4 in. x 75 ft. (Black) | FELT-06/ 07575 | 24 | Single Roll (1-23 Rolls) 1 - 4 Cases (24-119 Rolls) 5 - 9 Cases (120-239 Rolls) 10+ Cases (>= 240 Rolls) | | |
1 in. x 15 ft. (Black) *shorter 15 ft. length | FELT-06/ 115 | 36 | Single Roll (1-35 Rolls) 1 - 4 Cases (36-179 Rolls) 5 - 9 Cases (180-359 Rolls) 10+ Cases (>= 360 Rolls) | | |
1 in. x 75 ft. (Black) | FELT-06/ 175 | 18 | Single Roll (1-17 Rolls) 1 - 4 Cases (18-89 Rolls) 5 - 9 Cases (90-179 Rolls) 10+ Cases (>= 180 Rolls) | | |
2 in. x 15 ft. (Black) *shorter 15 ft. length | FELT-06/ 215 | 24 | Single Roll (1-23 Rolls) 1 - 4 Cases (24-119 Rolls) 5 - 9 Cases (120-239 Rolls) 10+ Cases (>= 240 Rolls) | | |
2 in. x 75 ft. (Black) | FELT-06/ 275 | 6 | Single Roll (1-5 Rolls) 1 - 4 Cases (6-29 Rolls) 5 - 9 Cases (30-59 Rolls) 10+ Cases (>= 60 Rolls) | | |
3 in. x 75 ft. (Black) | FELT-06/ 375 | 4 | Single Roll (1-3 Rolls) 1 - 4 Cases (4-19 Rolls) 5 - 9 Cases (20-39 Rolls) 10+ Cases (>= 40 Rolls) | | |
4 in. x 75 ft. (Black) | FELT-06/ 475 | 4 | Single Roll (1-3 Rolls) 1 - 4 Cases (4-19 Rolls) 5 - 9 Cases (20-39 Rolls) 10+ Cases (>= 40 Rolls) | | |
6 in. x 75 ft. (Black) | FELT-06/ 675 | 3 | Single Roll (1-2 Rolls) 1 - 4 Cases (3-14 Rolls) 5 - 9 Cases (15-29 Rolls) 10+ Cases (>= 30 Rolls) | | |
12 in. x 75 ft. (Black) | FELT-06/ 1275 | 4 | Single Roll (1-3 Rolls) 1 - 4 Cases (4-19 Rolls) 5 - 9 Cases (20-39 Rolls) 10+ Cases (>= 40 Rolls) | | |
Nominal Tape Widths vs Actual Widths
Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:
- 1" Nominal width = 15/16" (24mm) Actual width
- 2" Nominal width = 1-7/8" (48mm) Actual width
- 3" Nominal width = 2-13/16" (72mm) Actual width
Note that tape rolls are NOT guaranteed to be splice-free.
FELT-06 Special Order Sizes
| ROLL SIZE | ITEM # |
ROLLS PER CASE |
QUANTITY ORDERING |
PRICE PER ROLL |
PRICE PER CASE |
|---|
1/2 in. x 30 ft. (Light Grey) Approximately 10 extra business days to ship | FELT-06/ 0530 | 110 | Single Roll (1-109 Rolls) 1 - 4 Cases (110, 220, 330, ... Rolls) 5 - 9 Cases (550, 660, 770, ... Rolls) 10+ Cases (1100, 1210, 1320, ... Rolls) | 1 case minimum $4.84 $4.72 $4.64 | |
1-1/8 in. x 75 ft. (White) Approximately 10 extra business days to ship | FELT-06/ 112575 | 49 | Single Roll (1-48 Rolls) 1 - 4 Cases (49, 98, 147, ... Rolls) 5 - 9 Cases (245, 294, 343, ... Rolls) 10+ Cases (490, 539, 588, ... Rolls) | 1 case minimum $8.55 $8.34 $8.20 | |
1-3/4 in. x 75 ft. (Black) Approximately 10 extra business days to ship | FELT-06/ 17575 | 32 | Single Roll (1-31 Rolls) 1 - 4 Cases (32, 64, 96, ... Rolls) 5 - 9 Cases (160, 192, 224, ... Rolls) 10+ Cases (320, 352, 384, ... Rolls) | 1 case minimum $12.52 $12.21 $12.01 | |
Special Order Policies & Footnotes:
Special Order Policies
- Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
- Special order sizes often ship direct from our supplier so will not arrive together with stocked products.
Special Order Minimums
- Minimum requirements apply because a size may be non-stock.
- Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).
Product Description
JVCC FELT-06 Polyester Felt Tape is a 1mm thick synthetic needle punched felt made from polyester fibers. One side is felt, and the other side has adhesive. Commonly used for joining and temporarily repairing fabric, curtains and cloth drapes in backdrops. Felt material is also used for filtration applications, gaskets, wipers, and padding in a wide variety of industries. JVCC FELT-06 hides seams being photographed, and is used for applying a clean, dark edge to platforms, flats and portals. Can also be used to create matte borders or edges and to line display and jewelry cases. The dark brown is great for padding furniture on dark stained wood floors to prevent scratches.
Application Instructions
On many of the adhesive felt products the rolls will have an approximately 2 inch to 4 inch leader of double-sided film tape applied to the release liner before the felt material starts. We recommend you either cut a small piece of felt off at the beginning of the roll with a pair of scissors to start, or peel the double-sided film tape off of the release liner to use as a way to begin applying the felt (try not to pull the double-sided film tape off of the felt backing though). It is sometimes easier to try to peel the corner of the felt away from the release liner (instead of the release liner away from the felt) since you may end up splitting the release liner when you do it that way.
Technical Information
JVCC FELT-06 Polyester Felt Tape
- Adhesive: synthetic rubber How are adhesives different?
- Carrier/Backing: polyester needled felt
- Release Liner: paper (reverse wound)
- Thickness: 49 mils (carrier, adhesive, liner) 39 mils (carrier, adhesive) 10 mils (liner) What is mil thickness?
- Adhesion: 130 ounces per inch (to stainless steel test panel)
- Application Temperature: 60°F (minimum)
- Service/Operating Temperature: -30°F to 150°F
- Certifications: meets RoHS Directive 2011/65/EU
- Core: 3" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils