JVCC FELT-08 Polyester Felt Tape [3mm thick felt]
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
Please use our Contact Us page to inquire about pricing and minimums for both custom dyed felt or a width not currently displayed.
Product Description
JVCC FELT-08 Polyester Felt Tape is a 3mm thick synthetic needle punched felt made from polyester fibers. One side is felt, and the other side has adhesive. Commonly used for joining and temporarily repairing fabric, curtains and cloth drapes in backdrops. Felt material is also used for filtration applications, gaskets, wipers, and padding in a wide variety of industries. JVCC FELT-08 hides seams being photographed, and is used for applying a clean, dark edge to platforms, flats and portals. Can also be used to create matte borders or edges and to line display and jewelry cases. Made in the U.S.
Application Instructions
On many of the adhesive felt products the rolls will have an approximately 2 inch to 4 inch leader of double-sided film tape applied to the release liner before the felt material starts. We recommend you either cut a small piece of felt off at the beginning of the roll with a pair of scissors to start, or peel the double-sided film tape off of the release liner to use as a way to begin applying the felt (try not to pull the double-sided film tape off of the felt backing though). It is sometimes easier to try to peel the corner of the felt away from the release liner (instead of the release liner away from the felt) since you may end up splitting the release liner when you do it that way.
* Multiple cases may be shipped per package in order to minimize the charge for shipping.
Technical Information
JVCC FELT-08 Polyester Felt Tape
- Adhesive: synthetic rubber How are adhesives different?
- Carrier/Backing: polyester felt
- Release Liner: paper (reverse wound)
- Thickness: 128 mils (carrier, adhesive, liner) 118 mils (carrier, adhesive) 10 mils (liner) What is mil thickness?
- Adhesion: 130 ounces per inch (to stainless steel test panel)
- Service/Operating Temperature: -30°F to 150°F
- Application Temperature: 60°F (minimum)
- Core: 3" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Roll Sizes/Widths
Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
FELT-08 Standard sizes
| ROLL SIZE | ITEM # |
ROLLS PER CASE |
QUANTITY ORDERING |
PRICE PER ROLL |
PRICE PER CASE |
|---|
3/4 in. x 15 ft. (Light Grey, Graphite Grey)*shorter 15 ft. length | FELT-08/ LGRY0755 | 48 | Single Roll (1-47 Rolls) 1 - 4 Cases (48-239 Rolls) 5 - 9 Cases (240-479 Rolls) 10+ Cases (>= 480 Rolls) | | |
3/4 in. x 75 ft. (Light Grey, Graphite Grey) | FELT-08/ LGRY07525 | 36 | Single Roll (1-35 Rolls) 1 - 4 Cases (36-179 Rolls) 5 - 9 Cases (180-359 Rolls) 10+ Cases (>= 360 Rolls) | | |
1 in. x 10 ft. (White)*shorter 10 ft. length | FELT-08/ WI10 | 24 | Single Roll (1-23 Rolls) 1 - 4 Cases (24-119 Rolls) 5 - 9 Cases (120-239 Rolls) 10+ Cases (>= 240 Rolls) | | |
1 in. x 100 ft. (White) | FELT-08/ WI13333 | 27 | Single Roll (1-26 Rolls) 1 - 4 Cases (27-134 Rolls) 5 - 9 Cases (135-269 Rolls) 10+ Cases (>= 270 Rolls) | | |
2 in. x 10 ft. (Black)*shorter 10 ft. length | FELT-08/ BLK210 | 24 | Single Roll (1-23 Rolls) 1 - 4 Cases (24-119 Rolls) 5 - 9 Cases (120-239 Rolls) 10+ Cases (>= 240 Rolls) | | |
2 in. x 10 ft. (White)*shorter 10 ft. length | Felt-08/ WHT210 | 24 | Single Roll (1-23 Rolls) 1 - 4 Cases (24-119 Rolls) 5 - 9 Cases (120-239 Rolls) 10+ Cases (>= 240 Rolls) | | |
2 in. x 50 ft. (Black) | FELT-08/ BLK21667 | 14 | Single Roll (1-13 Rolls) 1 - 4 Cases (14-69 Rolls) 5 - 9 Cases (70-139 Rolls) 10+ Cases (>= 140 Rolls) | | |
2 in. x 100 ft. (White) | Felt-08/ WI23333 | 14 | Single Roll (1-13 Rolls) 1 - 4 Cases (14-69 Rolls) 5 - 9 Cases (70-139 Rolls) 10+ Cases (>= 140 Rolls) | | |
Nominal Tape Widths vs Actual Widths
Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:
- 1" Nominal width = 15/16" (24mm) Actual width
- 2" Nominal width = 1-7/8" (48mm) Actual width
- 3" Nominal width = 2-13/16" (72mm) Actual width
Note that tape rolls are NOT guaranteed to be splice-free.
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils