DAP Touch 'n Foam Professional Window & Door Polyurethane Foam Sealant

Print Page
22 Reviews

Ask a Question 
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
  • Size
    20.0 oz.
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

DAP Touch 'n Foam Pro Window & Door Insulating Polyurethane Foam Sealant™ is a 1-component polyurethane foam sealant that dispenses minimal expanding formula that is guaranteed not to warp or bow window or door frames and jambs. Window & Door provides airtight insulation around window and door frames to block airflow and increase energy efficiency of the building envelope.

Features & Benefits

  • Meets AAMA-812.
  • Bright white color
  • Class 1 fire rated
  • Use with gun applicator
  • Will not bow or warp frames or jambs

Uses & Applications

Use to fill and Seal

  • Window and door frames / jambs
  • Gaps and cracks in foundations, crawlspaces, attics, and basements
  • Partitions and stud walls

Application Instructions

Preparation: To promote adhesion surface must clean, dry, and free of all foreign material. For easy attachment to foam applicator gun, apply petroleum jelly to the gun basket before screwing on can.

Application: For best results this product should only be dispensed in the UPSIDE-DOWN position and apply in spaces with 40% greater relative humidity. Fill gap no more than 1/4 full, allowing room for expansion.

Can Replacement: While pointing the gun in a safe direction, depress trigger and quickly remove empty can. Spray basket with polyurethane foam cleaner and immediately replace with a new can of foam to prevent foam from hardening in the gun

Clean-up: If wet foam contacts skin, clean immediately with a dry rag – do not use water – water accelerates curing. Cured foam must be removed mechanically from surfaces.

Storage/Re-Use: Turn gun’s flow control knob to closed position and store can in upright position (with gun still attached). To restart, shake well for 30 seconds, turn flow control knob to open position and dispense foam.


Technical Information

DAP Touch 'n Foam Professional Window & Door Polyurethane Foam Sealant
  • Standards Met: Class 1 fire rated
  • Shelf Life: 18 months (unopened)
  • Cure Time: Approx. 1 hour
  • Cuttable: Approx. 30 min. hours
  • Application Temperature Range: 60F to 100F (16C ~ 38C)
  • Country of Origin: Argentina
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Download Datasheets

The following downloads are available for this product:

Download Safety Data SheetDownload Technical Data Sheet

Touch 'n Foam Window & Door Standard sizes


20.0 oz.


UPC = 075650020104

Single Item (1-11 Items)

1 - 4 Cases (12-59 Items)

5 - 9 Cases (60-119 Items)

10+ Cases (>= 120 Items)


a 5% discount

a 6% discount

a 7% discount





Question & Answers

User Reviews

Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Continue Shopping
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles