NOTE: Federal regulations prohibit the shipment of restricted products (aerosol cans, flammable liquids, etc.) by air so please only choose UPS Ground or Surepost as your shipping method if including this product in your order. We can not export this product outside the continental U.S. for this reason.
DAP Touch 'N Foam Professional Wall & Cavity Spray Foam Sealant
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
Product Description
DAP Touch ‘N Foam Professional Wall & Cavity Foam is a first-of-its kind, patent pending, wide spray applicator and pre-mixed formula that, like a 2-component spray foam, air seals and insulates with ultimate spray control. The widespray applicator kits are portable, self-contained one-component polyurethane foam dispensing kits. When used according to manufacturer’s directions, they effectively air seal and insulate homes and buildings while enhancing R-Value and providing Class A fire resistance. The patent-pending technology offers a broadcast spray solution similar to two-component systems, but in a less complicated, easier to use one-component solution. This one-component system can be applied in a wide temperature range of 40°F - 120°F. Great for repairs, renovations and new installations. Not to be used for direct overhead spraying applications.
Features & Benefits
- Seals out air and provides thermal insulation saving on energy costs all year round.
- Class A fire rated.
- Fully portable.
- High closed cell content.
- Foam dries to the touch in 10-12 minutes.
- Bonds to a variety of materials including wood, masonry, metals & drywall.
- Interior use only.
Use to Fill & Seal:
- Stud wall cavities.
- Rim joists.
- Basements.
- Attics.
- Crawlspaces.
Country of Origin: United States.
Application Instructions
- * for filling wall cavities, rim joists, attic and crawl spaces - do NOT use for ceiling/overhead spraying
- Shake can vigorously for 30 seconds
- Hold nozzle 10 to 15 inches from material spraying
- Spray comes out fast - spray no more than 1/2 inch later at a time - do NOT overfill
- Wait 15+ minutes after each layer to allow for curing
Technical Information
DAP Touch 'N Foam Professional Wall & Cavity Spray Foam Sealant
- Standards Met: Class-A Fire Rated
- Application Temperature: 40°F to 120°F
- Tack Free: 10-12 Minutes
- Trimmable: 45 Minutes
- Fully Cured: 24 Hours
- Shelf Life: 15 Months
- Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Wall & Cavity Standard sizes
| ITEM SIZE | ITEM # |
ITEMS PER CASE |
QUANTITY ORDERING |
PRICE PER ITEM |
PRICE PER CASE |
|---|
97 sq. ft. yield / 10.5 lb. | 75650 00351
UPC = 075650003510 | 1 | Single Item (1 Item) 1 - 4 Cases (1-4 Items) 5 - 9 Cases (5-9 Items) 10+ Cases (>= 10 Items) | $181.91 $181.31
a 0% discount $179.80
a 1% discount $178.29
a 2% discount | |
185 sq. ft. yield / 20 lb. | 75650 00352
UPC = 075650003527 | 1 | Single Item (1 Item) 1 - 4 Cases (1-4 Items) 5 - 9 Cases (5-9 Items) 10+ Cases (>= 10 Items) | $317.89 $317.29
a 0% discount $314.65
a 1% discount $312.00
a 2% discount | |
Wall & Cavity Special Order Sizes
| ITEM SIZE | ITEM # |
ITEMS PER CASE |
QUANTITY ORDERING |
PRICE PER ITEM |
PRICE PER CASE |
|---|
323 sq. ft. yield / 35 lb. Approximately 15 extra business days to ship | 75650 00353
UPC = 756500035317 | 1 | Single Item (1 Item) 1 - 4 Cases (1, 2, 3, ... Items) 5 - 9 Cases (5, 6, 7, ... Items) 10+ Cases (10, 11, 12, ... Items) | $518.42 $517.82
a 0% discount $513.51
a 1% discount $509.19
a 2% discount | |
Please Read
Special Order Policies
- Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
- Special order sizes often ship direct from our supplier so will not arrive together with stocked products.
Question & Answers
[ viewing questions 1 through 1 of 1 total ]
Required fields
Please enter a Question. Please enter your Name. Please enter your Email Address.
G
Gary Jan 22, 2024
QUESTION: Instructions indicate spray at 1/2 inch thick in stud cavities. After expansion, apply second 1/2 inch coat to fill cavities. Guessing std 2x4 framing. Then does one 1/2" coat expand to approximately 2 inches for trimming?
ANSWER: We asked our DAP rep and they confirmed you are correct - a 1/2 inch coating should expand to roughly 2 inches.
User Reviews
Required fields
Please choosea Score. Please enter a Title. Please enter the Review. Please enter your Name. Please enter your Email Address.
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).