Duck Brand Indoor/Outdoor Fiberglass Double-Sided Carpet Tape [Permanent]

Print Page
2 Reviews
6 Question & Answers
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
    White
  • Size
    Purchased Most Frequently: 1.41 in. x 42 ft. (White)
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

Duck Brand Indoor/Outdoor Fiberglass Carpet Tape is a double-sided fiberglass tape used for permanent carpet installation. Fiberglass is moisture and mildew resistant so it is ideal for high traffic areas where moisture is a problem such as bathrooms, basements, and decks. For both indoor and outdoor use. Since Duck Indoor/Outdoor Fiberglass Carpet Tape is for permanent installations removal could cause damage to not only the floor but also to the carpet.

Instructions To Apply Double-Sided Fiberglass Carpet Tape

  1. Thoroughly clean and dry floor surface.
  2. Apply tape, liner side up, pressing firmly to floor.
  3. Roll or fold one half or carpet cut to fit area back over itself. Remove tape liner, then roll or fold carpet back down to floor, pressing firmly for good adhesion.
  4. Then repeat for the other half of carpet.
Country of Origin: United States.
* Multiple cases may be shipped per package in order to minimize the charge for shipping.

 

Technical Information

Duck Brand Indoor/Outdoor Fiberglass Double-Sided Carpet Tape
  • Carrier/Backing: fiberglass
  • Adhesive: rubber-based   How are adhesives different?
  • Release Liner: white paper
  • Thickness: 6 mils (carrier, adhesive)   What is mil thickness?
  • Adhesion: 75 ounces per inch (to stainless steel test panel)
  • Tensile Strength: 150 pounds per inch (longitudinal)
  • Service/Operating Temperature: up to 200°F
  • Application Temperature: 50°F to 120°F
  • Elongation: 7%
  • Core: 3" diameter
  • Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Indoor/Outdoor Fiberglass Standard sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

1.41 in. x 42 ft.

Actual Size: 36mm wide

286373 (old 392907)

UPC = 075353071960
6

Single Item (1-5 Items)

1 - 4 Cases (6-29 Items)

5 - 9 Cases (30-59 Items)

10+ Cases (>= 60 Items)

$4.69

$3.84
a 18% discount

$3.84
a 18% discount

$3.78
a 19% discount

N/A

$23.04

$23.04

$22.68

1.88 in. x 75 ft.

Actual Size: 48mm wide

286372 (old 442062)

UPC = 075353071984
10

Single Item (1-9 Items)

1 - 4 Cases (10-49 Items)

5 - 9 Cases (50-99 Items)

10+ Cases (>= 100 Items)

$9.17

$8.06
a 12% discount

$8.06
a 12% discount

$7.93
a 14% discount

N/A

$80.60

$80.60

$79.30

Question & Answers

[ viewing questions 1 through 6 of 6 total ]
C
Customer Feb 23, 2018
QUESTION: Has anyone used this to put vinyl flooring on an aluminum pontoon deck?
ANSWER: I used it for stair treads and they work great.
C
Customer Jan 21, 2018
QUESTION: Will this work to secure rubber diamond flooring to ramp of our enclosed trailer? We will drive a 4 person atv on it.
ANSWER: Thank you for your question! Most rubber floors should be installed with polyurethane glue. The carpet tape features an aggressive hot melt adhesive. It should stick to the floor, but you may need to use an additional adhesive to adhere the tape to the rubber flooring.
C
Customer Jul 03, 2017
QUESTION: Will this tape take stain off of a wooden floor surface?
ANSWER: No. I recently pulled mine off the floor and it came right off with no damage to the surface. I would still test it to be sure.
C
Customer May 22, 2017
QUESTION: Is this safe for real hardwood floors?
ANSWER: The Indoor/Outdoor carpet tape has an unyielding adhesive, and it is meant for permanent applications. Removal of the tape may leave behind a residue, which can be removed with Murphy's Oil Soap or WD-40.
C
Customer May 17, 2017
QUESTION: The descriptions emphasize "permanent". If I use this to attach a rug outdoors to concrete, what will I need to do to move the rug later?
ANSWER: The tape should pull up with the rug. If not, you can heat the tape with a hair dryer or heat gun to soften the adhesive to pull the tape up. Any adhesive residue can be removed with Murphy's Oil Soap or WD-40. If the concrete is not sealed, the adhesive could get absorbed by the concrete.

User Reviews

[ viewing reviews 1 through 2 of 2 total ]
RH
Roxanne H. Verified Buyer Aug 26, 2019
What I Needed
Duck Brand Indoor/Outdoor Fiberglass Indoor/Outdoor Fiberglass Double-Sided Carpet Tape [Permanent]
Easy transaction and all the right stuff!
DP
David P. Verified Buyer Nov 20, 2018
v/good
Duck Brand Indoor/Outdoor Fiberglass Indoor/Outdoor Fiberglass Double-Sided Carpet Tape [Permanent]
v/good
Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Continue Shopping
EMAIL/SMS SIGN-UP
 +1
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles