Excell Gummed Paper Tape Dispenser (ET-377)

Print Page
2 Reviews
5 Question & Answers
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
  • Size
    For tape up to 3" wide
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

The Excell ET-377 Gummed Paper Tape Dispenser is a manual, pull and tear type tape dispenser for use with gummed (AKA water-activated) paper tape rolls up to 3 inches wide. The durable, metal construction of the Excell ET-377 offers a sturdy dispenser, designed to sit on a desktop and manually dispense water-activated tape. The plastic water bottle allows for easy water level monitoring to ensure the brush is moist for consistent performance.

Product Features

  • Designed to be used with water-activated gum tape
  • For use with tape rolls up to 3 inches (77mm) wide with a maximum outside diameter of around 6-1/2 inches.
  • Easily monitor the water level

Application Instructions

  1. Place the roll of Gummed Paper Tape onto the dispenser. Thread the tape under the first white roller making sure the gummed side is facing down.
  2. Pull the tape from under the white roller, over the top of the second and thread straight under the metal strip to reach the blade.
  3. Remove the black padded roller and fill hot water about halfway up the container. Place the roller back into the dispenser and turn to moisten. NOTICE: Do not overfill the container.
  4. Pull the tape making sure it makes contact with the moistened roller.
  5. Cut the tape by using the blade.
  6. After use, discard the water and clean the container.

Warning: This product can expose you to chemicals including Lead, which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.


Technical Information

Excell Gummed Paper Tape Dispenser (ET-377)
  • Construction: metal
  • Country of Origin: Taiwan, R.O.C.
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Download Datasheets

The following downloads are available for this product:

Download Instruction Sheet

ET-377 Standard sizes


For tape up to 3" wide


EAN = 4710273660547

Single Item (1-9 Items)

1 - 4 Cases (10-49 Items)

5 - 9 Cases (50-99 Items)

10+ Cases (>= 100 Items)


a 6% discount

a 7% discount

a 8% discount





Question & Answers

[ viewing questions 1 through 5 of 5 total ]
Customer Feb 26, 2018
QUESTION: Does the water in the dispenser need to be hot?
ANSWER: We use it for our custom tape just add room temp water with no problems.
Customer Nov 27, 2017
QUESTION: Will this dispenser be able to accommodate a Size: 3" x 3600"(300 ft) roll, or is that too big?
ANSWER: The dispenser can accept rolls up to 3 inches wide with a maximum outside diameter of around 6-1/2 inches.
Customer Nov 27, 2017
QUESTION: Will this dispenser be able to accommodate a Size: 3" x 3600"(300 ft) roll, or is that too big?
ANSWER: The dispenser can accept rolls up to 3 inches wide with a maximum outside diameter of around 6-1/2 inches. 
Customer Nov 04, 2017
QUESTION: So this can also handle smaller widths?
ANSWER: Yes, the dispenser can accommodate rolls up to 3 inches (77mm) wide so if less than 3 inches can still use them in the dispenser. Thank you.
Customer Nov 04, 2017
QUESTION: Is the wetting roller foam?
ANSWER: No, the wetting roller is more of a fabric material. Thank you.

User Reviews

[ viewing reviews 1 through 2 of 2 total ]
alan a. Verified Buyer Mar 18, 2019
exactly what I ordered. thanks
Excell ET-377 Gummed Paper Tape Dispenser
exactly what I ordered. thanks
Terrance D. Verified Buyer Feb 11, 2018
Simple tool
Excell ET-377 Gummed Paper Tape Dispenser
Simple tool that does the job without too much hassle.
Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Continue Shopping
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles