Gorilla 4242502 Epoxy Stick Putty
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
Gorilla Epoxy Stick Putty is a solid and versatile epoxy putty. The hand-mixable, easy-to-use gray Epoxy Stick sets in just 10 minutes and works on most surfaces. Gorilla Glue All Purpose Epoxy Stick is waterproof, non-rusting, and once cured, it can be drilled, sanded, and painted. Great for auto, plumbing, household repairs, and more!
Features & Benefits
- Gorilla All purpose epoxy stick is an incredibly strong and versatile epoxy putty.
- Incredibly strong - 1550 PSI
- Sets in 10 minutes
- Withstands temperatures up to 300°F
Uses & Applications
- Bonded wood materials should not be submerged or soaked in water.
- Not for exhaust systems.
- For temporary repair of drainage pipes or low pressure pipes only.
- Bonds – Metal, Plastic, Concrete, Ceramic, PVC, Fiberglass, Stone, Glass, Wood and More.
Made in the U.S.
Wear disposable gloves to avoid skin contact. Remove foil sticker & film wrapper and set aside for storage of any unused putty. Wash hands thoroughly after handling.
- For best results, roughen smooth surfaces with sandpaper before applying putty. All surfaces should be clean and free of grease, oil, or other loose particles.
- Cut off desired amount of putty.
- Mix by kneading the putty to a uniform color (approx. 30-60 seconds). Putty will not harden completely if not mixed thoroughly.
- Apply putty by firmly pressing to the project surface within 5 minutes of mixing.
Set time: 10 minutes
Cure time: 24 hours
Clean up: Remove any excess material before hardening.
Usage: Use in a well-ventilated area. Paintable after 1 hour. Wear dust mask and protective eyewear when sanding or drilling cured product.
* Multiple cases may be shipped per package in order to minimize the charge for shipping.
Gorilla 4242502 Epoxy Stick Putty
Note: Specifications are those given by manufacturers and are not tested for accuracy.
4242502 Standard sizes
|ITEM SIZE||ITEM #
||ITEMS PER CASE
||PRICE PER ITEM
||PRICE PER CASE
2 oz. stick
UPC = 052427006721
Single Item (1-5 Items)
1 - 4 Cases (6-29 Items)
5 - 9 Cases (30-59 Items)
10+ Cases (>= 60 Items)
a 14% discount
a 14% discount
a 15% discount
Question & Answers
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils