Gorilla Mounting Putty

Print Page

Ask a Question 
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
  • Size
    2 oz. / 84 squares
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

Gorilla Mounting Putty is ideal for securely mounting light objects such as posters, paintings, lights, ribbons, and other objects up to 2 pounds against a wall or similar surface. 84 pre-cut squares are ready for use straight out of the package, with the only preparation required being cleaning/drying both surfaces before beginning the mounting process. If stored properly in a cool, dry place, Gorilla Mounting Putty should not dry out and be ready for use whenever needed. Non-toxic and safe for use on paper, painted walls, wood, tile, metal, posters, plastic, glass, and more.

Tips for Use

  • Apply when temperature is above 50°F. Recommended in use temperature range: 50-85°F (10-30°C)
  • Remove mounted items carefully and dab to lift excess putty.


  • Not for use on applications where injury could result if mounted item fell.
  • Not recommended for use on freshly painted walls or flocked wallpaper.
  • Avoid direct exposure to water.
  • May stain some surfaces.
Country of Origin: United States.

Application Instructions

  1. Ensure both surfaces are clean and dry.
  2. Remove desired amount of putty squares for application. Use directly from package without kneading and apply approximately 4 squares of putty per 1 pound of weight. Not recommended for hanging objects over 2 pounds.
  3. Apply square(s) to the object being mounted allowing for even distribution of weight.
  4. Press object firmly in place for 30 seconds to allow Gorilla Mounting Putty to conform to the surface and create a strong bond.
* Multiple cases may be shipped per package in order to minimize the charge for shipping.


Technical Information

Gorilla Mounting Putty
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Download Datasheets

The following downloads are available for this product:

Download Safety Data Sheet

Mounting Putty Standard sizes


2 oz. / 84 squares


UPC = 052427008183

Single Item (1-7 Items)

1 - 4 Cases (8-39 Items)

5 - 9 Cases (40-79 Items)

10+ Cases (>= 80 Items)


a 11% discount

a 12% discount

a 12% discount





Question & Answers

User Reviews

Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Continue Shopping
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles