HIGHTIDE Penco Tape Dispenser

Print Page
1 Question & Answers
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
    Green-
    Ivory-
    Navy Blue-
    Red-
  • Size
    Purchased Most Frequently: 0.8 in. width (Red)
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

Hightide Penco Tape Dispenser is a general-purpose desktop dispenser constructed from steel. Its steel construction allows for years of heavy-duty use and its smooth running tape roller makes it easy to pull and cut tapes. This is rust and scratch-resistant. The dispensers can be mounted on walls. The dispensers can accommodate multiple sizes of tape up to a 2-inch outside diameter for the small and 3.75-inches for the large. These are sold as a small or large size - the large size can hold up to 25mm (0.98 inch) maximum tape width and the small size holds up to 20mm (0.8 inch) maximum tape width. Country of Origin: Japan.

* Multiple cases may be shipped per package in order to minimize the charge for shipping.

 

Technical Information

HIGHTIDE Penco Tape Dispenser
  • Core: 3/4 in. diameter
  • Construction: steel
  • Country of Origin: Japan
Note: Specifications are those given by manufacturers and are not tested for accuracy.

HSDP175/176 Standard sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

small / tape up to 0.8 in. wide, 2.0 in. diameter

HSDP1755

Single Item (1-4 Items)

1 Case (5-9 Items)

2 Cases (10-14 Items)

3+ Cases (>= 15 Items)

$16.64

$15.64
a 6% discount

$15.51
a 7% discount

$15.38
a 8% discount

N/A

$78.20

$77.55

$76.90

large / tape up to 0.98 in. wide, 3.75 in. diameter

HSDP1763

Single Item (1-2 Items)

1 Case (3-5 Items)

2 Cases (6-8 Items)

3+ Cases (>= 9 Items)

$30.00

$28.67
a 4% discount

$28.43
a 5% discount

$28.19
a 6% discount

N/A

$86.01

$85.29

$84.57

Question & Answers

[ viewing questions 1 through 1 of 1 total ]
E
Emile Aug 08, 2020
QUESTION: Where do I find tape that fits the small sized hi tide metal dispenser? It has a small spool
ANSWER: The HIGHTIDE dispenser has a 1-inch diameter core and can accept tape with up to a 2-inch outside diameter. The small version can take tape up to a 0.8-inch width. All the washi rolls seen as https://www.findtape.com/paper-tape/washi-tape/c173/ will fit into that small dispenser. Products like Duck Matte-Finish (see https://www.findtape.com/p1080/?tid=30) and 3M Magic Tape (see https://www.findtape.com/p611/?tid=30) will fit into the large version. Thank you.

User Reviews

Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Continue Shopping
EMAIL/SMS SIGN-UP
 +1
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles