JVCC DCT-44A Double-Sided Tissue Tape [Acrylic Adhesive]
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
BACKORDER NOTE *** orders can be placed for backordered items at any timeItem is expected in approximately 12 day(s)
Product Description
JVCC DCT-44A Double-Sided Tissue Tape is a 4.7 mil thick white, non-woven tissue tape coated on both sides (AKA double-coated) with a solvent-based acrylic adhesive. This double-sided tape is wound on a siliconized 90 gr. gold glassine paper release liner. JVCC DCT-44A exhibits good permanent adhesive strength as well as good static and dynamic shear properties on most surfaces, even when heat is applied. No plasticizer migration on most surfaces. Perfect for splicing of plastic film, paper, foil, cardboard, and corrugated carton. Can also be used for general holding, joining, attaching, and laminating applications.
* Multiple cases may be shipped per package in order to minimize the charge for shipping.
Technical Information
JVCC DCT-44A Double-Sided Tissue Tape
- Carrier/Backing: non-woven tissue
- Adhesive: solvent based acrylic How are adhesives different?
- Release Liner: siliconized 80 gsm gold glassine paper
- Thickness: 4.7 mils (carrier, adhesive) What is mil thickness?
- Adhesion: 83 ounces per inch (to stainless steel test panel)
- Service/Operating Temperature: -22°F to 248°F
- Application Temperature: 50°F to 105°F
- Core: 3" diameter neutral
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Roll Sizes/Widths
Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
Please contact us to inquire about pricing for full-cut widths (e.g. a 6 inch roll cut to exactly 152mm instead of 144mm).
Alternative to...
This product can be used as an alternative to the following products(s):
- Tesa #7158, #50658, #4959, #50605
- Shurtape DT200
- 3M #469
- Achem DT63Q
- V. Himark #L2450
PLEASE NOTE: "Alternative" to is NOT the same as equivalent to so please ensure the specifications listed are suitable for your application.
DCT-44A Standard sizes
| ROLL SIZE | ITEM # |
ROLLS PER CASE |
QUANTITY ORDERING |
PRICE PER ROLL |
PRICE PER CASE |
|---|
3/8 in. x 55 yds.Actual Size: 9mm x 50m | DCT-44A/ 03855 | 128 | Single Roll (1-127 Rolls) 1 - 2 Cases (128-383 Rolls) 3 - 11 Cases (384-1,535 Rolls) 12+ Cases (>= 1,536 Rolls) | $3.08 $2.04
a 34% discount $2.00
a 35% discount $1.97
a 36% discount | |
1/2 in. x 55 yds.Actual Size: 12mm x 50m | DCT-44A/ 0555 | 96 | Single Roll (1-95 Rolls) 1 - 2 Cases (96-287 Rolls) 3 - 11 Cases (288-1,151 Rolls) 12+ Cases (>= 1,152 Rolls) | $3.74 $2.62
a 30% discount $2.58
a 31% discount $2.53
a 32% discount | |
3/4 in. x 55 yds.Actual Size: 18mm x 50m | DCT-44A/ 07555 | 64 | Single Roll (1-63 Rolls) 1 - 2 Cases (64-191 Rolls) 3 - 11 Cases (192-767 Rolls) 12+ Cases (>= 768 Rolls) | $5.08 $3.77
a 26% discount $3.71
a 27% discount $3.66
a 28% discount | |
1 in. x 55 yds.Actual Size: 24mm x 50m | DCT-44A/ 155 | 48 | Single Roll (1-47 Rolls) 1 - 2 Cases (48-143 Rolls) 3 - 11 Cases (144-575 Rolls) 12+ Cases (>= 576 Rolls) | $5.95 $4.94
a 17% discount $4.85
a 18% discount $4.77
a 20% discount | |
1-1/2 in. x 55 yds.Actual Size: 36mm x 50m | DCT-44A/ 1555 | 32 | Single Roll (1-31 Rolls) 1 - 2 Cases (32-95 Rolls) 3 - 11 Cases (96-383 Rolls) 12+ Cases (>= 384 Rolls) | $8.42 $7.25
a 14% discount $7.13
a 15% discount $7.01
a 17% discount | |
2 in. x 55 yds.Actual Size: 48mm x 50m | DCT-44A/ 255 | 24 | Single Roll (1-23 Rolls) 1 - 2 Cases (24-71 Rolls) 3 - 11 Cases (72-287 Rolls) 12+ Cases (>= 288 Rolls) | $10.89 $9.56
a 12% discount $9.40
a 14% discount $9.24
a 15% discount | |
3 in. x 55 yds.Actual Size: 72mm x 50m | DCT-44A/ 355 | 16 | Single Roll (1-15 Rolls) 1 - 2 Cases (16-47 Rolls) 3 - 11 Cases (48-191 Rolls) 12+ Cases (>= 192 Rolls) | $15.84 $14.20
a 10% discount $13.97
a 12% discount $13.74
a 13% discount | |
4 in. x 55 yds.Actual Size: 96mm x 50m | DCT-44A/ 455 | 12 | Single Roll (1-11 Rolls) 1 - 2 Cases (12-35 Rolls) 3 - 11 Cases (36-143 Rolls) 12+ Cases (>= 144 Rolls) | $20.74 $18.82
a 9% discount $18.50
a 11% discount $18.19
a 12% discount | |
6 in. x 55 yds.Actual Size: 144mm x 50m | DCT-44A/ 655 | 8 | Single Roll (1-7 Rolls) 1 - 2 Cases (8-23 Rolls) 3 - 11 Cases (24-95 Rolls) 12+ Cases (>= 96 Rolls) | $30.99 $28.42
a 8% discount $27.94
a 10% discount $27.46
a 11% discount | |
Nominal Tape Widths vs Actual Widths
Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:
- 1" Nominal width = 15/16" (24mm) Actual width
- 2" Nominal width = 1-7/8" (48mm) Actual width
- 3" Nominal width = 2-13/16" (72mm) Actual width
Note that tape rolls are NOT guaranteed to be splice-free.
Custom Tape Widths
May be Available!
- Need custom sized or "full-cut" width tapes? Many of our tapes come to our converter as full wide width "log rolls" (not pre-cut), and can be custom cut to widths not shown in the pricing table.
- Contact us today for pricing and minimum requirements to order your desired tape in a custom width.
- Please note that since this tape comes in "log roll" format most rolls ship on a plain white core (i.e. with no branding or text inside the core).
DCT-44A Special Order Sizes
| ROLL SIZE | ITEM # |
ROLLS PER CASE |
QUANTITY ORDERING |
PRICE PER ROLL |
PRICE PER CASE |
|---|
7 in. x 55 yds. **full-width cutActual Size: 177.8mm wide | DCT-44A/ 7F55 | 6 | Single Roll (1-5 Rolls) 1 - 2 Cases (6-17 Rolls) 3 - 11 Cases (18-71 Rolls) 12+ Cases (>= 72 Rolls) | 1 case minimum $35.15
a 8% discount $34.56
a 9% discount $33.97
a 11% discount | |
21 in. x 55 yds. **full-width cutActual Size: 533mm wide | DCT-44A/ 21F55 | 2 | Single Roll (1 Roll) 1 - 2 Cases (2-5 Rolls) 3 - 11 Cases (6-23 Rolls) 12+ Cases (>= 24 Rolls) | 1 case minimum $105.44
a 7% discount $103.68
a 8% discount $101.92
a 10% discount | |
Special Order Policies & Footnotes:
Special Order Policies
- Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
Special Order Minimums
- Minimum requirements apply because a size may be non-stock or if special setup is required to cut rolls to your desired custom width.
- Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).
Question & Answers
User Reviews
[ viewing reviews 1 through 3 of 3 total ]
JJ
Jake J. Verified Buyer Aug 22, 2018
Stick it!
JVCC DCT-44A Double-Sided Tissue Tape [Acrylic Adhesive]
The place to go, for tape. If you need it they have it, at a price that can not be beat.
RB
Rob B. Verified Buyer Aug 14, 2017
amazing tape!
JVCC DCT-44A Double-Sided Tissue Tape [Acrylic Adhesive]
The product had some poor starts and bad cutting when I first purchased it, but I've given them some critique about the QC of the product and I have to say, the cutting and overall use has improved 98%! I still buy the tape because the cost is the BEST all around, and the improvement of the QC has really upped the tick on this brand! Many thanks!
J
Jake Verified Buyer Aug 09, 2014
Great Tape
JVCC DCT-44A Double-Sided Tissue Tape [Acrylic Adhesive]
This is an excellent product that sticks to anything and holds great. The best double sided tape I have ever used!
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils