PLEASE NOTE 'Intertape 9975' is out of stock and not currently available for purchase on the site.
Intertape 9975 Double-Sided Outdoor Carpet Tape [Overstock]
This is overstock material and inventory is limited. Please note the front packaging label on the roll is typically torn and rolls are discounted appropriately.
Intertape 9975 Double-Sided Outdoor Carpet Tape is a heavy duty double-sided black cloth tape on a white film release liner used for outdoor carpet hold down and mounting. Can be used for outdoor use since tape carrier/backing offers excellent weatherability.
Instructions To Apply IPG 9975 Double-Sided Carpet Tape
- Thoroughly clean and dry floor surface.
- Apply tape, liner side up, pressing firmly to floor.
- Roll or fold one half or carpet cut to fit area back over itself. Remove tape liner, then roll or fold carpet back down to floor, pressing firmly for good adhesion.
- Then repeat for the other half of carpet.
Intertape 9975 Double-Sided Outdoor Carpet Tape
- Carrier/Backing: heavy-duty cotton cloth
- Release Liner: white film
- Thickness: 11.4 mils (carrier, adhesive) What is mil thickness?
- Core: 3" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
Question & Answers
[ viewing questions 1 through 1 of 1 total ]
Customer Oct 01, 2017
QUESTION: How do you remove the liner?
ANSWER: While film release liners are great since once you get them started they can be removed very quickly from a roll of tape without the possibility of the liner ripping like a paper release liner may at times do; nonetheless they can sometimes be hard to get started. The easiest way to remove a release liner is to unwind a section of the tape from the roll and apply that section of tape to the first surface you are bonding to and then let the adhesive set before you try and remove the liner. It is very hard to remove the release liner after just unwinding a section from the roll before the adhesive has set on the first surface.
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils