JVCC Electrical Tape [Small Core] (E-Tape-SC)

Print Page
11 Reviews
Ask a Question
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
  • Size
    3/4 in. x 30 ft. *19mm wide
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

JVCC E-Tape-SC (Small Core) Electrical Tape is a general-purpose all-weather black PVC film electrical insulation tape with an aggressive rubber resin adhesive. As the title suggests, JVCC E-Tape-SC tape is wound on a smaller 1-inch inner diameter core. E-Tape-SC Electrical Tape is most commonly used for wire and cable insulation and bundling. Electrical tape is frequently used to install low voltage cabling such as voice, data, video, alarm, and access control cabling. This tape is UL/CSA listed and is not flame retardant.

Electrical tape, as known as insulating tape, is a type of pressure-sensitive tape used to insulate electrical wires and other materials that conduct electricity. As it is easily torn by hand, can be written on, and generally removes from smooth surfaces cleanly, it is useful for a number of other applications such as labeling and temporarily attaching objects to one another. Electrical tape can be used to wrap tools or other items, such as drumsticks, for added grip.

Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.


Technical Information

JVCC Electrical Tape (E-Tape-SC)
  • Standards Met: UL/CSA listed
  • Carrier/Backing: plasticized polyvinyl chloride (PVC) film
  • Adhesive: rubber resin   How are adhesives different?
  • Thickness: 7 mils (carrier, adhesive)   What is mil thickness?
  • Adhesion: 18 ounces per inch (to stainless steel test panel)
  • Tensile Strength: 18 pounds per inch (longitudinal)
  • Service/Operating Temperature: up to 176°F
  • Elongation: 200%
  • Core: 1" diameter
  • Shelf Life: 12 months
  • Vehicle: Plaster
  • Country of Origin: China
Note: Specifications are those given by manufacturers and are not tested for accuracy.

E-Tape-SC Standard sizes


3/4 in. x 30 ft.

Actual Size: 19mm wide

E-TAPE-SC/ 07530

UPC = 695087747063

Single Item (1-19 Items)

Partial Case (20-199 Items)

1 - 9 Cases (200-1,999 Items)

10 - 18 Cases (2,000-3,799 Items)

19+ Cases (>= 3,800 Items)


a 26% discount

a 48% discount

a 57% discount

a 59% discount






Question & Answers

User Reviews

Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Continue Shopping
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles