Excell ET-LPD

Excell ET-LPD Table Top Label Protection Tape Dispenser

  • Quantity
    View Full Pricing Table
    View "Full Pricing Table" below for detailed pricing and additional sizes!
  • Color
    Blue and Ivory
  • Dispenser Size
    Purchased Most Frequently: 6 in. wide (Blue and Ivory) | See Pricing Table below for additional options.
  • Price
    $ Price/photo will update once color & size have been chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

Excell ET-LPD Table Top Label Protection Tape Dispensers are used to dispense label protection tape on a 3-inch diameter core, with a maximum roll width of either 4-inches or 6-inches. Both dispensers will accept a tape roll with a maximum outside diameter of 5.75 inches. The serrated knife ensures a consistent cut performance. Constructed with durable plastic materials. The dispensers have pre-drilled holes in the base and can be screwed down to a work surface. Please note that screws are not included with the dispenser.

The Excell ET-LPD dispensers are designed to work with the weight of the label protection tape roll. The weight of the tape roll helps to hold the roller in place while in operation. The label protection tape roll will spin freely around the dispenser roller making for an easy removal and adhesion process.

 

Technical Information

Excell ET-LPD Table Top Label Protection Tape Dispenser
  • Construction: plastic
Note: Specifications are those given by manufacturers and are not tested for accuracy.

ET-LPD Standard sizes

DISPENSER SIZEITEM # DISPENSERS PER CASE QUANTITY ORDERING PRICE PER DISPENSER PRICE PER CASE

For tape up to 4" wide

ET-4008

Single Dispenser (1-7 Dispensers)

1 - 4 Cases (8-39 Dispensers)

5 - 9 Cases (40-79 Dispensers)

10+ Cases (>= 80 Dispensers)

$15.86

$14.85

$14.74

$14.63

N/A

$118.80

$117.92

$117.04

For tape up to 6" wide

ET-6006

Single Dispenser (1-5 Dispensers)

1 - 4 Cases (6-29 Dispensers)

5 - 9 Cases (30-59 Dispensers)

10+ Cases (>= 60 Dispensers)

$17.33

$16.29

$16.17

$16.04

N/A

$97.74

$97.02

$96.24

Excell ET-LPD Table Top Label Protection Tape Dispenser
Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Shopping Cart Summary

Newsletter Signup

Sign up today to be notified of upcoming deals and exclusive offers!

Adhesive Tape Blog
Video Resource Library
How-To Resource Articles
See also
Electrical Tapes
Tapes for Scrapbooking