Excell Desk Tape Dispenser [Dual Core] | SKU ET-19125
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
Product Description
The Excell ET-19125 Dual Core Desk Tape Dispenser is a weighted, plastic desktop dispenser built around an interchangeable dual-core hub. Each unit ships with both a 1-inch and a 3-inch core holder integrated into a single core piece, so you can run smaller stationery and craft tapes today and switch to a 3-inch packaging or shipping roll tomorrow without buying a second dispenser.
The base of the ET-19125 is sand-weighted to anchor the dispenser firmly on the desk, allowing true one-handed dispensing: pull, press down to engage the cutter, and tear off a strip without holding the body. A rubber pad on the underside protects the work surface from scratches and helps keep the dispenser from sliding during use.
An anti-rust serrated blade delivers a clean, straight cut on each pull, and an integrated pencil/pen cup molded into the body keeps a writing instrument within reach for labeling boxes or marking shipments. Available in black or blue. A replacement blade (Excell ET-19125-RP) is also available.
Capacity
- Tape width: up to 1 inch
- Maximum roll outside diameter on the 1-inch core: 2-1/4 inches
- Maximum roll outside diameter on the 3-inch core: 5 inches
- Core diameters accepted: 1 inch or 3 inches (both integrated into one core piece)
Key Features
- Dual-core hub accepts both 1-inch and 3-inch core tapes
- Sand-weighted base allows one-handed dispensing
- Rubber base pad protects desks and reduces slipping
- Anti-rust serrated cutter blade for clean, straight cuts
- Integrated pencil/pen holder built into the body
- Patented Excell design
- Tape not included
- Dispenser dimensions: 8 in. x 3 in. x 3-1/2 in.
Application Instructions
- Set the dispenser on a flat, clean desk or workbench surface with the cutter blade facing the user.
- Lift the dual-core hub out of the dispenser arms.
- Select the side of the hub that matches the core size of your tape roll: the smaller 1-inch end for stationery and office tapes, or the larger 3-inch end for packaging and shipping tapes.
- Slide the tape roll onto the matching end of the hub so the tape unwinds from the underside toward the cutter.
- Place the hub with the tape roll back into the dispenser arms.
- Pull a short length of tape forward and press it down onto the serrated blade so the leading edge is exposed and ready to grab.
- To dispense, grasp the leading edge of the tape, pull forward to the length needed, then press down and pull against the blade to cut a clean strip.
- When the roll is empty, lift the hub out, remove the empty core, and load a new roll on the appropriate end.
- If the blade ever dulls, the cutter is user-replaceable using the Excell ET-19125-RP replacement blade.
Warning: This product can expose you to chemicals including lead, which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.
Technical Information
Excell Desk Tape Dispenser | SKU ET-19125
- Weight: 2 pounds 13 ounces
- Construction: plastic
- Country of Origin: Taiwan, R.O.C.
Note: Specifications are those given by manufacturers and are not tested for accuracy.
ET-19125 Standard sizes
| ITEM SIZE | ITEM # |
ITEMS PER CASE |
QUANTITY ORDERING |
PRICE PER ITEM |
PRICE PER CASE |
|---|
8 in. x 3 in. x 3-1/2 in. / for tape up to 1 in. wide | ET-19125-S | 12 | Single Item (1-11 Items) 1 - 4 Cases (12-59 Items) 5 - 9 Cases (60-119 Items) 10+ Cases (>= 120 Items) | $4.67 $3.96
a 15% discount $3.89
a 17% discount $3.83
a 18% discount | |
Question & Answers
User Reviews
[ viewing reviews 1 through 1 of 1 total ]
MS
Michelle S. Verified Buyer May 02, 2018
Well made! Very happy with
Excell ET-19125 Desk Tape Dispenser [Dual Core]
Well made! Very happy with it!
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).