JVCC Magnetic Tape [With Adhesive, 1/32" thickness] (MAG-01)

Print Page
1 Question & Answers
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
  • Size
    Purchased Most Frequently: 3/4 in. x 10 ft. (Black)
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

JVCC MAG-01 Magnetic Tape is a flexible magnet mounted on a thin polyester film which has been coated on one side with an aggressive rubber-based pressure-sensitive adhesive. The tape is supplied self-wound on a semi-bleached kraft paper liner. The magnet is comprised of a multipole one face flexible magnet (composite of strontium and/or barium ferrite particles oriented with a thermoplastic polymer matrix). These permanent magnets remain magnetized indefinitely if not subjected to a demagnetizing force. This tape is not returnable for this reason.

This magnet has a thickness of 30 mils as noted in the product specializations so is slightly under 1/32 inch in thickness. As such it would not be able to hold up heavier weight items like heavy-weight fabric (see the 1/16 inch thick JVCC MAG-02 for heavier weight items). Through our own testing, we have found when the surface area of a 2-1/2 inch long x 1 inch wide strip weighs up to 0.5 pounds it is attracted enough to MAG-01 to be held up. One way we've found to increase the magnetic attraction is to cut some MAG-01 into two pieces and then peel off the release liner to expose the adhesive side and then adhere to the two substrates. Then bring both magnetic sides together which typically creates a stronger magnetic bond.

As noted above JVCC MAG-01 is a single-faced multi-pole magnet so one side has a polarity and the other side is coated with an adhesive. The side with polarity would be attracted to ferromagnetic materials such as iron, nickel, and cobalt. It would also be attracted to a magnet of the opposite polarity. The tape is NOT attracted to itself (it repels) since it would need a magnet of the opposite polarity to attract.

NOTE: if your magnetic tape curls when you try to apply it to your surface, this is due to being wound in a roll and has no effect on the magnetic properties or quality of the tape. Simply unwind and cut your piece from the roll, place under a weight (e.g. a book or stack of papers) for a short period of time to help "flatten" out the strip of magnetic tape, then apply to your surface as normal. Country of Origin: United States.

* Multiple cases may be shipped per package in order to minimize the charge for shipping.


Technical Information

JVCC Magnetic Tape (MAG-01)
  • Carrier/Backing: magnet
  • Adhesive: rubber-based   How are adhesives different?
  • Release Liner: semi-bleached Kraft paper
  • Thickness: 33 mils (carrier, adhesive) 30 mils (carrier)   What is mil thickness?
  • Adhesion: 112 ounces per inch (to stainless steel test panel)
  • Service/Operating Temperature: 0°F to 150°F
  • Core: 3" diameter
  • Shelf Life: 5 Years
  • Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.

MAG-01 Standard sizes


1/2 in. x 10 ft.

MAG-01/ 0510

UPC = 688295158738

Single Item (1-11 Items)

1 - 4 Cases (12-59 Items)

5 - 9 Cases (60-119 Items)

10+ Cases (>= 120 Items)


a 18% discount

a 20% discount

a 21% discount





1/2 in. x 200 ft.

MAG-01/ 05200

UPC = 685646493555

Single Item (1-5 Items)

1 - 4 Cases (6-29 Items)

5 - 9 Cases (30-59 Items)

10+ Cases (>= 60 Items)


a 9% discount

a 10% discount

a 12% discount





3/4 in. x 10 ft.

MAG-01/ 07510

UPC = 688295158745

Single Item (1-7 Items)

1 - 4 Cases (8-39 Items)

5 - 9 Cases (40-79 Items)

10+ Cases (>= 80 Items)


a 16% discount

a 18% discount

a 19% discount





3/4 in. x 200 ft.

MAG-01/ 075200

UPC = 685646493562

Single Item (1-3 Items)

1 - 4 Cases (4-19 Items)

5 - 9 Cases (20-39 Items)

10+ Cases (>= 40 Items)


a 8% discount

a 10% discount

a 11% discount





1 in. x 10 ft.

MAG-01/ 110

UPC = 687927075498

Single Item (1-3 Items)

1 - 4 Cases (4-19 Items)

5 - 9 Cases (20-39 Items)

10+ Cases (>= 40 Items)


a 15% discount

a 16% discount

a 17% discount





1 in. x 200 ft.

MAG-01/ 1200

UPC = 685646493579

Single Item (1 Item)

1 - 4 Cases (2-9 Items)

5 - 9 Cases (10-19 Items)

10+ Cases (>= 20 Items)


a 8% discount

a 10% discount

a 11% discount





MAG-01 Special Order Sizes


2 in. x 200 ft.

Approximately 4 extra business days to ship
MAG-01/ 22002

Single Item (1 Item)

1 - 4 Cases (2, 4, 6, ... Items)

5 - 9 Cases (10, 12, 14, ... Items)

10+ Cases (20, 22, 24, ... Items)


a 8% discount

a 10% discount

a 11% discount





3 in. x 200 ft.

Approximately 4 extra business days to ship
MAG-01/ 32001

Single Item (1 Item)

1 - 4 Cases (1, 2, 3, ... Items)

5 - 9 Cases (5, 6, 7, ... Items)

10+ Cases (10, 11, 12, ... Items)


a 8% discount

a 9% discount

a 11% discount





   Please Read

Special Order Policies

  • Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
  • Special order sizes often ship direct from our supplier so will not arrive together with stocked products.

Question & Answers

[ viewing questions 1 through 1 of 1 total ]
Noah Jan 25, 2024
QUESTION: What is the polarity of the magnet facing up?
ANSWER: The orientation of the polarity in the flexible magnet material flips every 1/16 of an inch through the width of the material. There isn’t really a front or back with regard to the orientation of the polarity.

User Reviews

Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles