Retailer of Tape, Glues/Adhesives & Dispensers

JVCC OPP-22C

JVCC OPP-22C Mid Grade Colored Packaging Tape

JVCC OPP-22C Mid Grade Colored Packaging Tape

  • Quantity
    View Full Pricing Table
    View "Full Pricing Table" below for detailed pricing and additional sizes!
  • Color
  • Roll Size *
    Purchased Most Frequently: 4 in. x 55 yds. (Yellow) | See Pricing Table below for additional options.
  • Price
    $ Price/photo will update once color & size have been chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

JVCC OPP-22C Mid Grade Colored Packaging Tape is a 28 micron polypropylene film packaging tape with a solvent-based acrylic adhesive. Used for carton sealing, color coding, splicing and identification applications. Available in 7 bright colors. The color on the tape is translucent so for the lighter colors you would be able to read writing underneath the tape.

Warning: This product can expose you to chemicals including Benzene, which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.

 

Technical Information

JVCC OPP-22C Mid Grade Colored Packaging Tape
  • Carrier/Backing: 28 micron polypropylene film
  • Adhesive: solvent based acrylic   How are adhesives different?
  • Thickness: 2.2 mils (carrier, adhesive)   What is mil thickness?
  • Adhesion: 27 ounces per inch (to stainless steel test panel)
  • Tensile Strength: 20 pounds per inch (longitudinal)
  • Service/Operating Temperature: 32°F to 150°F
  • Elongation: 140%
  • Core: 3" diameter neutral
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Alert Roll Sizes/Widths

Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).

Please contact us to inquire about pricing for full-cut widths (e.g. a 6 inch roll cut to exactly 152mm instead of 144mm).

Alternative To

Alternative to...

This product can be used as an alternative to the following products(s):

  • ACHEM #122
  • Berry Plastics #730 Red
PLEASE NOTE: "Alternative" to is NOT the same as equivalent to so please ensure the specifications listed are suitable for your application.
View related products we sell to this item.

OPP-22C Special Order Sizes

ROLL SIZEITEM # ROLLS PER CASE QUANTITY ORDERING PRICE PER ROLL PRICE PER CASE

3/8 in. x 55 yds.

Actual Size: 9mm x 50m

Approximately 3 extra business days to ship
OPP-22C/ 03855192

Single Roll (1-191 Rolls)

1 - 5 Cases (192, 384, 576, ... Rolls)

6 - 11 Cases (1152, 1344, 1536, ... Rolls)

12+ Cases (2304, 2496, 2688, ... Rolls)

1 case minimum

$0.84

$0.81

$0.76

---

$161.28

$155.52

$145.92

1/2 in. x 55 yds.

Actual Size: 12mm x 50m

Approximately 3 extra business days to ship
OPP-22C/ 0555144

Single Roll (1-143 Rolls)

1 - 5 Cases (144, 288, 432, ... Rolls)

6 - 11 Cases (864, 1008, 1152, ... Rolls)

12+ Cases (1728, 1872, 2016, ... Rolls)

1 case minimum

$0.95

$0.93

$0.88

---

$136.80

$133.92

$126.72

3/4 in. x 55 yds.

Actual Size: 18mm x 50m

Approximately 3 extra business days to ship
OPP-22C/ 0755596

Single Roll (1-95 Rolls)

1 - 5 Cases (96, 192, 288, ... Rolls)

6 - 11 Cases (576, 672, 768, ... Rolls)

12+ Cases (1152, 1248, 1344, ... Rolls)

1 case minimum

$1.22

$1.20

$1.13

---

$117.12

$115.20

$108.48

1 in. x 55 yds.

Actual Size: 24mm x 50m

Approximately 3 extra business days to ship
OPP-22C/ 15572

Single Roll (1-71 Rolls)

1 - 5 Cases (72, 144, 216, ... Rolls)

6 - 11 Cases (432, 504, 576, ... Rolls)

12+ Cases (864, 936, 1008, ... Rolls)

1 case minimum

$1.52

$1.50

$1.39

---

$109.44

$108.00

$100.08

1-1/2 in. x 55 yds.

Actual Size: 36mm x 50m

Approximately 3 extra business days to ship
OPP-22C/ 155548

Single Roll (1-47 Rolls)

1 - 5 Cases (48, 96, 144, ... Rolls)

6 - 11 Cases (288, 336, 384, ... Rolls)

12+ Cases (576, 624, 672, ... Rolls)

1 case minimum

$2.12

$2.09

$1.96

---

$101.76

$100.32

$94.08

2 in. x 55 yds.

Actual Size: 48mm x 50m

Approximately 3 extra business days to ship
OPP-22C/ 25536

Single Roll (1-35 Rolls)

1 - 5 Cases (36, 72, 108, ... Rolls)

6 - 11 Cases (216, 252, 288, ... Rolls)

12+ Cases (432, 468, 504, ... Rolls)

1 case minimum

$2.71

$2.67

$2.50

---

$97.56

$96.12

$90.00

3 in. x 55 yds.

Actual Size: 72mm x 50m

Approximately 3 extra business days to ship
OPP-22C/ 35524

Single Roll (1-23 Rolls)

1 - 5 Cases (24, 48, 72, ... Rolls)

6 - 11 Cases (144, 168, 192, ... Rolls)

12+ Cases (288, 312, 336, ... Rolls)

1 case minimum

$3.92

$3.86

$3.61

---

$94.08

$92.64

$86.64

4 in. x 55 yds.

Actual Size: 96mm x 50m

Approximately 3 extra business days to ship
OPP-22C/ 45518

Single Roll (1-17 Rolls)

1 - 5 Cases (18, 36, 54, ... Rolls)

6 - 11 Cases (108, 126, 144, ... Rolls)

12+ Cases (216, 234, 252, ... Rolls)

1 case minimum

$5.14

$5.05

$4.72

---

$92.52

$90.90

$84.96

Special Order Policies & Footnotes:

Special Order Policies

  • Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
  • Special order sizes often ship direct from our supplier so will not arrive together with stocked products.

Special Order Minimums

  • Minimum requirements apply because a size may be non-stock or if special setup is required to cut rolls to your desired custom width.
  • Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).
JVCC OPP-22C Mid Grade Colored Packaging Tape
Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Shopping Cart Summary
VIEW CART - or - PROCEED TO CHECKOUT
Continue Shopping

Newsletter Signup

Sign up today to be notified of upcoming deals and exclusive offers!

Adhesive Tape Blog
Video Resource Library
How-To Resource Articles
See also
Electrical Tapes
Tapes for Scrapbooking