JVCC PTU-25F UPVC Packaging Tape

Print Page

Ask a Question

Quantity

Rolls Cases

View "Full Pricing Table" below for detailed pricing and additional sizes!
Color/ Pattern

Fluorescent Orange
Roll Size *

Purchased Most Frequently: 12 in x 72 yds. (Fluorescent Orange) | See Pricing Table below for additional options.
Price

$ Price/photo will update once color & size have been chosen.

Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

JVCC PTU-25F UPVC Packaging Tape is a quiet unwind UPVC packaging tape used for carton sealing applications. It comes in a fluorescent orange color so is a great choice if you need a brightly colored choice which will clearly stand out. JVCC PTU-25F can also be used in office environments where a quieter unwind tape is desired (makes less noise when unwound than a polypropylene packaging tape would make). Use with a handheld dispenser to seal cartons with recycled fiber content, heavy ink coverage, wax coated, or rough surfaces. The tape is printable and heat shrinkable and can also be used on printed stock and recycled paper..

Technical Information

JVCC PTU-25F UPVC Packaging Tape

Carrier/Backing: unplasticized polyvinyl chloride (UPVC) film
Adhesive: solvent-based natural rubber How are adhesives different?
Thickness: 2.5 mils (carrier, adhesive) What is mil thickness?
Adhesion: 15 ounces per inch (to stainless steel test panel)
Tensile Strength: 42 pounds per inch (longitudinal)
Service/Operating Temperature: up to 158°F
Elongation: 90%
Core: 3" diameter

Note: Specifications are those given by manufacturers and are not tested for accuracy.

Roll Sizes/Widths

Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).

Please contact us to inquire about pricing for full-cut widths (e.g. a 6 inch roll cut to exactly 152mm instead of 144mm).

PTU-25F Standard sizes

ROLL SIZE	ITEM #	ROLLS PER CASE	QUANTITY ORDERING	PRICE PER ROLL	PRICE PER CASE
2 in. x 72 yds. Actual Size: 48mm x 66m	PTU-25F/ 272	36	Single Roll (1-35 Rolls) 1 - 4 Cases (36-179 Rolls) 5 - 9 Cases (180-359 Rolls) 10+ Cases (>= 360 Rolls)	$7.47 $6.30 $6.19 $6.09	N/A $226.80 $222.84 $219.24

Nominal Tape Widths vs Actual Widths

Nominal vs. Actual Widths

Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:

1" Nominal width = 15/16" (24mm) Actual width
2" Nominal width = 1-7/8" (48mm) Actual width
3" Nominal width = 2-13/16" (72mm) Actual width

Note that tape rolls are NOT guaranteed to be splice-free.

Custom Tape Widths
May be Available!

Need custom sized or "full-cut" width tapes? Many of our tapes come to our converter as full wide width "log rolls" (not pre-cut), and can be custom cut to widths not shown in the pricing table.
Contact us today for pricing and minimum requirements to order your desired tape in a custom width.
Please note that since this tape comes in "log roll" format most rolls ship on a plain white core (i.e. with no branding or text inside the core).

PTU-25F Special Order Sizes

ROLL SIZE	ITEM #	ROLLS PER CASE	QUANTITY ORDERING	PRICE PER ROLL	PRICE PER CASE
1 in. x 72 yds. Actual Size: 24mm x 66m Approximately 3 extra business days to ship	PTU-25F/ 172	72	Single Roll (1-71 Rolls) 1 - 4 Cases (72, 144, 216, ... Rolls) 5 - 9 Cases (360, 432, 504, ... Rolls) 10+ Cases (720, 792, 864, ... Rolls)	1 case minimum $3.28 $3.23 $3.17	--- $236.16 $232.56 $228.24
1-1/2 in. x 72 yds. Actual Size: 36mm x 66m Approximately 3 extra business days to ship	PTU-25F/ 1572	48	Single Roll (1-47 Rolls) 1 - 4 Cases (48, 96, 144, ... Rolls) 5 - 9 Cases (240, 288, 336, ... Rolls) 10+ Cases (480, 528, 576, ... Rolls)	1 case minimum $4.99 $4.91 $4.83	--- $239.52 $235.68 $231.84
3 in. x 72 yds. Actual Size: 72mm x 66m Approximately 3 extra business days to ship	PTU-25F/ 372	24	Single Roll (1-23 Rolls) 1 - 4 Cases (24, 48, 72, ... Rolls) 5 - 9 Cases (120, 144, 168, ... Rolls) 10+ Cases (240, 264, 288, ... Rolls)	1 case minimum $9.60 $9.44 $9.29	--- $230.40 $226.56 $222.96
4 in. x 72 yds. Actual Size: 96mm x 66m Approximately 3 extra business days to ship	PTU-25F/ 472	18	Single Roll (1-17 Rolls) 1 - 4 Cases (18, 36, 54, ... Rolls) 5 - 9 Cases (90, 108, 126, ... Rolls) 10+ Cases (180, 198, 216, ... Rolls)	1 case minimum $12.66 $12.46 $12.25	--- $227.88 $224.28 $220.50
6 in. x 72 yds. Actual Size: 144mm x 66m Approximately 3 extra business days to ship	PTU-25F/ 672	12	Single Roll (1-11 Rolls) 1 - 4 Cases (12, 24, 36, ... Rolls) 5 - 9 Cases (60, 72, 84, ... Rolls) 10+ Cases (120, 132, 144, ... Rolls)	1 case minimum $19.19 $18.88 $18.56	--- $230.28 $226.56 $222.72
12 in. x 72 yds. Actual Size: 288mm x 66m Approximately 3 extra business days to ship	PTU-25F/ 1272	6	Single Roll (1-5 Rolls) 1 - 4 Cases (6, 12, 18, ... Rolls) 5 - 9 Cases (30, 36, 42, ... Rolls) 10+ Cases (60, 66, 72, ... Rolls)	1 case minimum $38.00 $37.38 $36.76	--- $228.00 $224.28 $220.56

Special Order Policies & Footnotes:

Special Order Policies

Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
Special order sizes often ship direct from our supplier so will not arrive together with stocked products.

Special Order Minimums

Minimum requirements apply because a size may be non-stock or if special setup is required to cut rolls to your desired custom width.
Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).

Shop Related Categories

Packaging Tape & Sealing Tape UPVC (Bag Sealing, Noiseless Unwind)

Question & Answers

User Reviews

hot melt rubber (synthetic)

Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).

natural rubber

Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.

acrylic

Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.

silicone

Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.

zinc oxide

Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.

Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.

1 mil = 1/1000 of an inch

Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils

Shopping Cart Summary

VIEW CART - or - PROCEED TO CHECKOUT

Continue Shopping