Office, DIY, Health, Sports, Crafting, School & Outdoors
JVCC Vinyl Dots On A Roll (SKU V-DCD)
JVCC V-DCD Vinyl Dots On A RollJVCC V-DCD Vinyl Dots On A RollOrangeBlackRedWhiteYellowJVCC Vinyl Dots On A Roll (SKU V-DCD)

JVCC Vinyl Dots On A Roll (SKU V-DCD)

Print Page
29 Reviews
1 Question & Answers
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
    Black-
    Blue-
    Green-
    Orange-
    Red-
    White-
    Yellow-
  • Size
    Purchased Most Frequently: 5 in. width (Yellow)
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

JVCC V-DCD Vinyl Dots On A Roll are SPVC vinyl die cut dots on a pressure-sensitive adhesive roll. Used for aisle marking, color coding, inventory identification, defect marking, and numerous other applications. Made of durable vinyl construction so product is waterproof and can withstand heavy traffic. Another use for the 1/2 inch diameter yellow dots is to use as a marker strip on the nose of checker-plate stair treads to meet the new codes that require a contrasting color on the front of every stair tread. The dots slip down inside the checkers as a clean strip at the front of the tread and don't wear or mar. The vinyl dots can also be used for social distance marking in school cafeterias and classrooms.

For the 1/2, 3/4 and 1 inch diameter dots there are 1,000 dots on a roll and all other sizes have 500 dots on a roll. Country of Origin: United States.

* Multiple cases may be shipped per package in order to minimize the charge for shipping.

 

Technical Information

JVCC Vinyl Dots On A Roll (SKU V-DCD)
  • Carrier/Backing: soft polyvinyl chloride (SPVC) film
  • Adhesive: synthetic rubber resin   How are adhesives different?
  • Thickness: 5.1 mils (carrier, adhesive)   What is mil thickness?
  • Adhesion: 11 ounces per inch (to stainless steel test panel)
  • Tensile Strength: 11 pounds per inch (longitudinal)
  • Core: 3" diameter neutral
  • Shelf Life: 12 months
  • Odor: Ketone/Alcohol (or span solvent)
  • Dry Time: Less than 1 hour in shallow fills up to 1/8”
  • Consistency: Stiff Putty
  • Vehicle: Nitrocellulose
  • Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.

V-DCD Special Order Sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

1/2 in. / 1,000 dots per roll

Approximately 5 extra business days to ship
V-DCD/ 0515

Single Item (1-4 Items)

1 - 2 Cases (5, 10 Items)

3 - 4 Cases (15, 20 Items)

5+ Cases (25, 30, 35, ... Items)

1 case minimum

$34.91
a 4% discount

$34.63
a 4% discount

$34.33
a 5% discount

---

$174.55

$173.15

$171.65

3/4 in. / 1,000 dots per roll

Approximately 5 extra business days to ship
V-DCD/ 07515

Single Item (1-4 Items)

1 - 2 Cases (5, 10 Items)

3 - 4 Cases (15, 20 Items)

5+ Cases (25, 30, 35, ... Items)

1 case minimum

$38.43
a 3% discount

$38.13
a 4% discount

$37.81
a 5% discount

---

$192.15

$190.65

$189.05

1 in. / 1,000 dots per roll

Approximately 5 extra business days to ship
V-DCD/ 115

Single Item (1-4 Items)

1 - 2 Cases (5, 10 Items)

3 - 4 Cases (15, 20 Items)

5+ Cases (25, 30, 35, ... Items)

1 case minimum

$41.91
a 3% discount

$41.57
a 4% discount

$41.21
a 5% discount

---

$209.55

$207.85

$206.05

2 in. / 500 dots per roll

Approximately 5 extra business days to ship
V-DCD/ 25004

Single Item (1-3 Items)

1 - 2 Cases (4, 8 Items)

3 - 4 Cases (12, 16 Items)

5+ Cases (20, 24, 28, ... Items)

1 case minimum

$41.91
a 3% discount

$41.57
a 4% discount

$41.21
a 5% discount

---

$167.64

$166.28

$164.84

3 in. / 500 dots per roll

Approximately 5 extra business days to ship
V-DCD/ 35003

Single Item (1-2 Items)

1 - 2 Cases (3, 6 Items)

3 - 4 Cases (9, 12 Items)

5+ Cases (15, 18, 21, ... Items)

1 case minimum

$70.33
a 3% discount

$69.75
a 4% discount

$69.16
a 5% discount

---

$210.99

$209.25

$207.48

4 in. / 500 dots per roll

Approximately 5 extra business days to ship
V-DCD/ 45002

Single Item (1 Item)

1 - 2 Cases (2, 4 Items)

3 - 4 Cases (6, 8 Items)

5+ Cases (10, 12, 14, ... Items)

1 case minimum

$97.49
a 3% discount

$96.68
a 4% discount

$95.88
a 4% discount

---

$194.98

$193.36

$191.76

5 in. / 500 dots per roll

Approximately 5 extra business days to ship
V-DCD/ 55002

Single Item (1 Item)

1 - 2 Cases (2, 4 Items)

3 - 4 Cases (6, 8 Items)

5+ Cases (10, 12, 14, ... Items)

1 case minimum

$145.95
a 3% discount

$144.74
a 4% discount

$143.53
a 4% discount

---

$291.90

$289.48

$287.06

   Please Read

Special Order Policies

  • Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
  • Special order sizes often ship direct from our supplier so will not arrive together with stocked products.

Special Order Minimums

  • Minimum requirements apply because a size may be non-stock or if special setup is required to cut rolls to your desired custom width.
  • Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).

Question & Answers

[ viewing questions 1 through 1 of 1 total ]
KN
Katherine Nooyen Jun 22, 2024
QUESTION: Are the JVCC vinyl dots on a roll safe for marley dance flooring?
ANSWER: Yes, the JVCC vinyl dots should be fine on a Marley floor. Thank you.

User Reviews

Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
VIEW CART - or - PROCEED TO CHECKOUT
Continue Shopping
Continue Shopping