'Mueller ICP' is out of stock and not currently available for purchase on the site.
Mueller ICP Kold Instant Cold Pack
Mueller Kold Instant Cold Pack is a single-use, fast-acting disposable ice compress that is used for sports injuries or first aid. Other uses include to help relieve pain, reduce swelling, and speedy recovery from minor bumps, cuts, scrapes, bruises, muscle aches, strains, sprains, headaches, toothaches, minor burns, and insect bites. These are convenient and ready to use when you need them. No refrigeration is necessary and activates instantly when squeezed. Ammonium nitrate free. Do not apply directly to the skin or reuse the pack by freezing as this would result in frostbite.
- Shake It - Shake contents to bottom of bag
- Break It - Hold away from the body and squeeze sides with both hands
- Mix It - Shake vigorously for at least 30 seconds to mix
- Wrap It - Wrap or cover pack with protective material
- Follow standard R.I.C.E. therapy - rest, apply ice, compression and elevate
Made in the U.S.
Mueller ICP Kold Instant Cold Pack
- Warning #1: Do not apply directly to skin.
- Warning #2: Do not freeze or reuse.
- Ingredients: Urea, Ammonium Chloride, Water
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Question & Answers
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils