Shurtape GG-200 Double-Sided Crepe Paper Tape [Golf Grip Installation]
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
ITEMS ON BACKORDER: *** you can choose to be notified via text when items are back in stock
The following are expected in approximately 21 day(s):
Color/Size: NATURAL 2 in. x 36 yds.
Shurtape GG-200 Double-Sided Crepe Paper Tape is a double-sided (AKA double-faced or double-coated) golf grip tape used for factory and clubhouse installations. This tape can also be used for mounting, holding, splicing, tabbing and fastening of a variety of other substrates for which an aggressive, double-faced tape is needed. The grip (liner) side adhesive on the tape is specially formulated for effective golf grip installation while the shaft (exposed) side adhesive is designed for superior adhesion to graphite, steel and titanium.
Features & Benefits
- When used as a golf grip installation tape, offers fast set-up and easy clean up.
- Good tensile strength
- Both tape and release liner are wrinkle-resistant.
- Factory and clubhouse golf grip installation
- Mounting, holding, splicing, tabbing and fastening a variety of substrates when an aggressive, double-sided tape is required
Made in the U.S.
For instructions on how to regrip golf clubs using double-sided paper tape please see this About.com step-by-step article
Shurtape GG-200 Double-Sided Crepe Paper Tape
- Carrier/Backing: crepe paper
- Adhesive: rubber-based How are adhesives different?
- Release Liner: siliconized, crepe paper
- Thickness: 6.5 mils (carrier, adhesive) What is mil thickness?
- Adhesion: 50 ounces per inch (to stainless steel test panel)
- Tensile Strength: 23 pounds per inch (longitudinal)
- Service/Operating Temperature: 50°F to 150°F
- Elongation: 10%
- Core: 3" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
GG-200 Standard sizes
|ROLL SIZE||ITEM #
||ROLLS PER CASE
||PRICE PER ROLL
||PRICE PER CASE
3/4 in. x 36 yds.
Actual Size: 18mm x 33m
UPC = 686162768790
Single Roll (1-47 Rolls)
1 - 3 Cases (48-191 Rolls)
4 - 7 Cases (192-383 Rolls)
8+ Cases (>= 384 Rolls)
a 11% discount
a 13% discount
a 16% discount
1 in. x 36 yds.
Actual Size: 24mm x 33m
UPC = 685646493647
Single Roll (1-35 Rolls)
1 - 3 Cases (36-143 Rolls)
4 - 7 Cases (144-287 Rolls)
8+ Cases (>= 288 Rolls)
a 11% discount
a 12% discount
a 14% discount
2 in. x 36 yds.
Actual Size: 48mm x 33m
UPC = 682821230196
Single Roll (1-23 Rolls)
1 - 3 Cases (24-95 Rolls)
4 - 7 Cases (96-191 Rolls)
8+ Cases (>= 192 Rolls)
a 7% discount
a 9% discount
a 10% discount
Nominal Tape Widths vs Actual Widths
5% narrower than the NOMINAL width shown in inches. Examples:
Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally
- 1" Nominal width = 15/16" (24mm) Actual width
- 2" Nominal width = 1-7/8" (48mm) Actual width
- 3" Nominal width = 2-13/16" (72mm) Actual width
Note that tape rolls are NOT guaranteed to be splice-free.
Question & Answers
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils