Stalogy 017

Stalogy 017 Touch Screen Cleaning Roller

  • Quantity
    View Full Pricing Table
    View "Full Pricing Table" below for detailed pricing and additional sizes!
  • Color
  • Item Size
    Purchased Most Frequently: Cleaning Roller Refill / 12 sheets (Clear) *roller | See Pricing Table below for additional options.
  • Price
    $ Price/photo will update once color & size have been chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

The Stalogy Touch Screen Cleaning Roller is a perfect addition to any touchscreen, phone, tablet, or other technical devices that collect dust, fingerprints, and other skin oils. This portable and refillable roller can be used directly on the devices and quickly and easily cleans off the surface. The adhesive tape roller contains 12 sticky sheet sections that can be used approximately 40 times. Once the section is no longer sticky, simply tear off the sheet at the perforations and you are ready to use the roller once again. The Stalogy Touch Screen (Colo Colo) Cleaning Roller hard plastic case is small, sturdy, lightweight and protects the roller inside. Take this with you anywhere and have a clear reading surface for all of your devices.

The Stalogy Cleaning Roller Refill pack contains 1 sticky cleaning roller with 12 sheets and quickly fits into the plastic case for continued cleaning use on your touch screens.

CAUTION: Using a roller on a surface that has hard particles or debris, may result in scratching the surface. Do not use the roller on surfaces other than touch screens. To avoid getting adhesive on the screen, do not press too hard with the roller, do not move the roller side-to-side while rolling up-and-down, and do not roll in reverse. The roller may not be able to remove oils other than skin oils. Do not use the roller tape without the case. For safety, turn off the touch screen device before cleaning the screen. The roller tape should not be stored in direct sunlight or in areas of high moisture or humidity. Made in Japan.

 

Technical Information

Stalogy 017 Touch Screen Cleaning Roller
  • Case: Hard Plastic
Note: Specifications are those given by manufacturers and are not tested for accuracy.

017 Standard sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

Cleaning Roller Refill / 12 sheets

S8R10

Single Item (1-9 Items)

1 Case (10-19 Items)

2 Cases (20-29 Items)

3+ Cases (>= 30 Items)

$6.13

$4.85

$4.77

$4.66

N/A

$48.50

$47.70

$46.60

Plastic Case with Cleaning Roller / 12 sheets

S85

Single Item (1-4 Items)

1 Case (5-9 Items)

2 Cases (10-14 Items)

3+ Cases (>= 15 Items)

$16.02

$13.72

$13.50

$13.19

N/A

$68.60

$67.50

$65.95

Stalogy 017 Touch Screen Cleaning Roller
Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Shopping Cart Summary
Recently Viewed Products

Newsletter Signup

Sign up today to be notified of upcoming deals and exclusive offers!

Adhesive Tape Blog
Video Resource Library
How-To Resource Articles
See also
Electrical Tapes
Tapes for Scrapbooking