Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
T-REX Clear Repair Tape is an all-weather crystal clear construction with strong adhesion to rough and wet surfaces making it ideal to use for repairs over a wide range of temperatures and weather condition. With its long-lasting holding power and durable puncture-resistant backing, this tape provides a waterproof and UV-resistant seal to almost all repairs. This see-through finish tape can be used for many fixes such as cracks on cell phones, plastic bins, mirrors, windows, tents, headlights and more. For any big or small fixes, this TREX tape is a great choice to use for any repairs you need.
Features & Benefits
- Aggressive adhesive sticks to wet surfaces.
- All-weather for use on indoor and outdoor repairs.
- Applies at below-freezing temperatures.
- Hand tear-able for easy application.
- Waterproof backing for water-resistant repairs (after application to the surface).
Made in the U.S.
T-REX Clear Repair Tape
- Adhesive: solvent acrylic How are adhesives different?
- Adhesion: 100 ounces per inch (to stainless steel test panel)
- Tensile Strength: 23.5 pounds per inch (longitudinal)
- Service/Operating Temperature: -5°F to 150°F
- Core: 3" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
Clear Standard sizes
|ROLL SIZE||ITEM #
||ROLLS PER CASE
||PRICE PER ROLL
||PRICE PER CASE
1.88 in. x 9 yds. (27 ft.) *retail-packed
UPC = 040074024762
Single Roll (1-5 Rolls)
1 - 2 Cases (6-17 Rolls)
3 - 4 Cases (18-29 Rolls)
5+ Cases (>= 30 Rolls)
a 10% discount
a 12% discount
a 13% discount
Nominal Tape Widths vs Actual Widths
Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:
- 1" Nominal width = 15/16" (24mm) Actual width
- 2" Nominal width = 1-7/8" (48mm) Actual width
- 3" Nominal width = 2-13/16" (72mm) Actual width
Note that tape rolls are NOT guaranteed to be splice-free.
Question & Answers
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils