Unasco Ceramic Anti-Seize Tape
Unasco Ceramic Anti-Seize TapeUnasco Ceramic Anti-Seize TapeUnasco Ceramic Anti-Seize TapeUnasco Ceramic Anti-Seize TapeUnasco Anti-Seize: Ceramic TapeUnasco Ceramic Anti-Seize Tape

Unasco Ceramic Anti-Seize Tape

Print Page
5 Reviews


Ask a Question 
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
    Ceramic
  • Size
    Purchased Most Frequently: 3/4 in. x 50 ft. (Ceramic)
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

Unasco Ceramic Anti-Seize Tape is a PTFE thread tape filled with ceramic flakes that helps threaded fittings go together, seal and come apart again without galling. The ceramic flakes act as slide or bearing plates between the mating threads for high lubricity, and the PTFE seals the threads and protects them from corrosion, dirt and grit. It is the choice for stainless steel and other jobs where a metal-filled (copper or nickel) tape is not appropriate, and where a paste anti-seize compound would be messy or bring a risk of contamination.

Unasco states it resists a broad range of chemicals, including strong alkaline solutions, most chemical and acid vapors, road salt, steam, salt water and iodized water, and works on galvanized steel, steel, iron, brass, copper, aluminum, titanium and magnesium without causing corrosion on stainless steel. It is non-flammable and rated from -450°F up to 500°F as a thread sealant. Wrap it like standard thread seal tape: three wraps seal most threads.

Features & Benefits

  • PTFE filled with ceramic flakes for anti-seize lubricity
  • Prevents galling on assembly and disassembly
  • Will not cause corrosion on stainless steel
  • Resists alkalis, acid vapors, salt, steam and road salt
  • Non-flammable; -450°F to 500°F
  • Clean alternative to anti-seize paste

Uses & Applications

  • Stainless steel pipe threads and fittings
  • Threads in galvanized steel, steel, iron, brass, copper, aluminum, titanium and magnesium
  • Bolts and fittings exposed to steam, salt or chemicals
  • Jobs where metal-filled tape or paste is not allowed

Instructions

  1. For fittings up to 1-1/2 in. (38 mm) diameter, use 1/2 in. (12 mm) wide tape.
  2. Clean the male and female threads thoroughly.
  3. Wrap the tape around the male thread in the same direction as the thread, keeping it under tension so it seats into the root of the thread.
  4. Do not let the tape overlap the end of the fitting.
  5. Three wraps seal most threads. For poor quality or damaged threads, parallel threads or fittings subject to vibration, use more than four wraps.
* Multiple cases may be shipped per package in order to minimize the charge for shipping.

 

Technical Information

Unasco Ceramic Anti-Seize Tape
  • Carrier/Backing: PTFE filled with ceramic flakes
  • Adhesive: N/A
  • Elongation: 100%
  • Material: ptfe filled with ceramic flakes
  • Density (standard): 0.8 g/cm3
  • Thread Sealant Temperature Range: -450°F to 500°F
  • Flammability: Non-flammable
  • Country of Origin: Australia
Note: Specifications are those given by manufacturers and are not tested for accuracy.

ATCE0 Standard sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

1/2 in. x 600 in.

ATCE001

UPC = 643781297698
10

Single Item (1-9 Items)

1 - 9 Cases (10-99 Items)

10 - 27 Cases (100-279 Items)

28+ Cases (>= 280 Items)

$17.99

$17.70
a 2% discount

$17.40
a 3% discount

$17.11
a 5% discount

N/A

$177.00

$174.00

$171.10

ATCE0 Special Order Sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

3/4 in. x 600 in.

Approximately 20 extra business days to ship
ATCE0036

Single Item (1-5 Items)

10 - 27 Cases (60, 66, 72, ... Items)

28+ Cases (168, 174, 180, ... Items)

10 case minimum

$26.18
a 3% discount

$25.74
a 4% discount

---

$157.08

$154.44

   Please Read

Special Order Policies

  • Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
  • Special order sizes often ship direct from our supplier so will not arrive together with stocked products.

Special Order Minimums

  • Minimum requirements apply because a size may be non-stock.
  • Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).

Question & Answers

User Reviews

Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Continue Shopping