- JVCC V-36P Premium Colored Vinyl Tape
Use JVCC V-36P Premium Colored Vinyl Tape to put your organization in compliance with OSHA requirements for lane marking and safety coding. This high-quality vinyl tape is available in many colors and is suitable for a wide variety of uses in indoor public, commercial and industrial settings. JVCC V-36P vinyl tape is also known as Splice Tape, Dance Floor Tape and Marley Tape. It has 25 percent more adhesion and is 1 mil thicker than regular standard JVCC V-36 vinyl tape which gives it its premium name. This colored vinyl tape is also perfect for marking parts and accessories, since sharpie markers write well on it, and color coding cell phones and other devices with their accompanying chargers and accessories. Features and Benefits Sharpie-friendly "write-on" capability Provides a highly effective barrier against moisture and vapor Resistant to water, sun, aging, bacteria and fungus, acids, alkalis, corrosive chemicals and oil The tape will not corrode brass, steel, copper or aluminum Highly conformable Good resistance to impact, abrasion and rupture Product Applications Temporary decorating and striping on vehicles, sporting equipment and boats Color coding equipment and accessories Lane marking Safety coding for OSHA requirements Harness and pipe wrapping Identify hazardous or restricted areas Duct and joint sealing Masking for hard chrome plating and anodizing Outlining designs on corn hole boards Marking tape for product during manufacturing process Tape floor protector to carpet Temporary seaming of PVC performance surfacing (for dance competitions, etc.)
- JVCC V-36 Colored Vinyl Tape
JVCC V-36 Colored Vinyl Tape is a durable tape used for marking floors/lanes, color coding, decorating, temporary striping on vehicles and boats, and to identify restricted or hazardous areas. Used extensively on school gym floors all kinds. Helps with safety coding to meet OSHA requirements. Can also be used for masking of hard chrome plating and anodizing, harness and pipe wrapping, and duct and joint sealing. JVCC V-36 Vinyl Tape is also known as Dance Floor Tape, Marley Tape, or Splice Tape. This tape is available in 13 OSHA colors: yellow, white, black, clear, red, orange, light blue, dark blue, gray, purple, emerald green, kelly green & dark brown. Features include: "Write-on" capability. Highly conformable and good abrasion/impact resistance. Provides vapor/moisture barrier. Resistant to aging, sun, water, fungus/bacteria, acids/chemicals. No corrosion to copper, brass, steel, or aluminum.
- Shurtape VP-410 Vinyl Film Tape [SPVC]
Shurtape VP-410 Vinyl Film Tape is a tough tape for tough jobs. VP-410 is versatile, long-lasting, resistant to weather, abrasion and wear. Highly conformable and easy to apply, Shurtape VP-410 is engineered with a non-corrosive adhesive and flexible backing. The tape is UV (ultraviolet) resistant and can be used in extensive temperature (20 F to 140 F), moisture and humid conditions and environments. Shurtape VP-410 vinyl film tape is a smart choice for general purpose floor, lane and aisle marking, color-coding and identification applications, as well as in the HVAC industry to wrap line sets, seam Rubatex and Armaflex, and insulate air ducts and underground pipes. This tape meets OSHA color-coding requirements, applicable standard CID A-A-1689B, Type 1, Class 2, and is available in a wide range of colors and widths. Features and Benefits UV (ultraviolet) resistant Can be used in extensive temperature, moisture and humid conditions Flexible backing Non-corrosive natural rubber adhesive Meets OSHA color-coding requirements Product Applications General purpose floor, lane and aisle marking Color-coding and identification applications Wrap line sets, seam Rubatex and Armaflex and insulate air ducts and underground pipes Excellent choice for the HVAC, manufacturing, building and construction industries
- JVCC VEPT-65 Vinyl Electroplating Tape
JVCC VEPT-65 Vinyl Electroplating Tape is a SPVC masking tape designed for use with PCB terminal zone contacts to prevent penetration of chemicals during the plating process and as a protection tape for shot peening applications. The tape is extremely conformable, durable and highly resistant to oil, acid, alkalines and corrosive chemicals. It also has excellent adhesion to metals and plastics.
- 3M Scotch Scotchcal Striping Tape
3M Scotchcal Striping Tape is typically used to create single or double stripe patterns on vehicles and boats - in order to match existing stripes or to create original striping designs on them. The tape also resists gasoline and chemicals. Primary uses include commercial vehicles, cars, automobiles, marine, railroad and bus graphics; sign graphics; and pinstriping. 3M Scotchcal is offered in over 100 different single and double color and width patterns. view all color shades this product comes in here
- JVCC VINYL2ND Vinyl Tape Seconds
JVCC VINYL2ND Vinyl Tape Seconds are SOLD AS IS and can not be returned. There are no guarantees on the product but it is a standard vinyl tape coated with rubber adhesive. Application uses include floor marking and color coding. Typical defects can include bad splices, wrinkles, blanks, dirty edges, lower adhesion and yellowing of outer layers. Inventory is limited and is sold on a first-come, first-served basis.
- 3M Scotch Scotchlite Reflective Striping Tape
3M Scotchlite Reflective Striping Tape is a reflective film which is intended to provide light reflective properties in darkness. Safety and nighttime visibility may be improved with the 3M Scotchlite Reflective Series Film 680 product. Primary uses include commercial vehicles, cars, automobiles, boats, railroad and bus graphics; sign graphics; and striping (great for motorcycle helmets). The black film, which reflects whitish/tan at night when hit by light, has a typical coefficient of retroreflection of 30. Meets NFPA requirements. Please note 3M uses the same Scotchcal retail packaging for all their striping tapes (whether they are reflective or not); however this tape is Scotchlite reflective striping tape and the correct product numbers listed below will be on the retail packaging 79902 - 1/4 inch wide black 79905 - 1/4 inch wide blue 79903 - 1/4 inch wide gold 79907 - 1/4 inch wide orange 79904 - 1/4 inch wide red 79901 - 1/4 inch wide silver / white 79908 - 1/4 inch wide yellow 79922 - 1/2 inch wide black 79942 - 1 inch wide black confirm 3M Scotchlite Reflective Film Series 680 Pattern No. 799-__ product numbers here Photometric Performance Coefficient of Retroreflection (candelas/lux/square meters) Observation Angle Entrance Angle Blue Orange Red Black Yellow Gold Silver/White 0.2° -4° 10 20 20 30 65 70 100
- JVCC DVT-76 Dry Vinyl Tape
JVCC DVT-76 Dry Vinyl Tape is a NON-ADHESIVE plasticized polyvinyl chloride film tape (the tape is self-fusing so clings firmly to its own backing for a tight wrap when encircled around an object; however since it is not coated with adhesive it will not stick or adhere to other surfaces). The tape's high elongation and good strength permit trouble-free binding of wire harnesses for the automotive industry. Dry Vinyl Tape is also used for plating applications - high stretch, easy unwind, good "cling" characteristics and great conformability provide for superior masking in hard chrome and other plating applications.
- JVCC V-DCD Vinyl Dots On A Roll
JVCC V-DCD Vinyl Dots On A Roll are SPVC vinyl die cut dots on a pressure-sensitive adhesive roll. Used for aisle marking, color coding, inventory identification, defect marking, and numerous other applications. Made of durable vinyl construction so product is waterproof and can withstand heavy traffic. Another use for the 1/2 inch diameter yellow dots is to use as a marker strip on the nose of checker-plate stair treads to meet the new codes that require a contrasting color on the front of every stair tread. The dots slip down inside the checkers as a clean strip at the front of the tread and don't wear or mar. For the 1/2, 3/4 and 1 inch diameter dots there are 1,000 dots on a roll and all other sizes have 500 dots on a roll.
- JVCC V-36P-EM Premium Embossed Stucco Masking Vinyl Tape
JVCC V-36P-EM Premium Embossed Stucco Masking Vinyl Tape is an embossed silver vinyl tape which is used to mask windows and doors in stucco applications. Unlike traditional vinyl tapes it is hand-tearable.
- JVCC V-DCA Vinyl Arrows On A Roll
JVCC V-DCA Vinyl Arrows On A Roll are SPVC vinyl die cut arrows on a pressure-sensitive adhesive roll. Used for aisle marking, color coding, inventory identification, defect marking, and numerous other applications. Made of durable vinyl construction so product is waterproof and can withstand heavy traffic. The arrows are dimensionally square so a 1 inch size arrow would be 1 inch wide by 1 inch long. For the 1 inch arrows there are 1,000 arrows on a roll and all other sizes have 500 arrows on a roll.
- JVCC V-36P-PC Premium Colored Vinyl Tape [Plastic Core]
JVCC V-36P-PC Premium Colored Vinyl Tape is a superior quality vinyl tape used for color coding; lane marking and safety coding to meet OSHA requirements; temporary decorating and striping on vehicles, boats and sporting equipment. Also to identify restricted or hazardous areas; masking for hard chrome plating and anodizing; harness and pipe wrapping; and duct and joint sealing. JVCC V-36P-PC Vinyl Tape is wound on a 3 inch diameter plastic core (unlike standard vinyl tape which comes on a standard cardboard core). This tape may be used for clean room applications; however please note rolls do NOT come individually bagged if that is a requirement of your cleanroom (they just come bulk packed). This vinyl tape is 1 mil thicker and has 25% more adhesion than regular JVCC V-36 Vinyl Tape. Features & Benefits Long shelf life. "Write-on" capability. Provides very effective vapor/moisture barrier. Highly conformable and good abrasion/impact/rupture resistance. Resistant to aging, sun, water, fungus/bacteria, oil, acids/alkalies/corrosive chemicals. No corrosion to copper, brass, steel, or aluminum.