JVCC HZ-8LP Laminated Premium Hazard Warning Tape [9 mils thick]
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
Our converter can also special order this tape with red/white or with black/white stripes (or in a longer 36 yard length) so please use our Contact Us'page to inquire about minimum requirements and pricing.
JVCC HZ-8LP Laminated Premium Hazard Warning Tape is a PVC vinyl tape with a 2 mil over-lamination. The tape is scuff resistant and it resists oil, grease, solvents, and moisture. JVCC HZ-8LP is used for marking fire equipment, exits, hazardous areas, floors, and first aid points. It also meets government specification A-A-1689B Type II.
Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.
JVCC HZ-8LP Laminated Premium Hazard Warning Tape
- Standards Met: CID A-A-1689B Type II
- Carrier/Backing: polyvinyl chloride (PVC) film
- Adhesive: rubber How are adhesives different?
- Thickness: 9 mils (carrier, adhesive) What is mil thickness?
- Adhesion: 22 ounces per inch (to stainless steel test panel)
- Tensile Strength: 33 pounds per inch (longitudinal)
- Elongation: 200%
- Core: 3" diameter neutral
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
Please contact us to inquire about pricing for full-cut widths (e.g. a 6 inch roll cut to exactly 152mm instead of 144mm).
HZ-8LP Standard sizes
|ROLL SIZE||ITEM #
||ROLLS PER CASE
||PRICE PER ROLL
||PRICE PER CASE
1 in. x 18 yds.
Actual Size: 24mm x 16.5m
Single Roll (1-47 Rolls)
1 - 5 Cases (48-287 Rolls)
6 - 11 Cases (288-575 Rolls)
12+ Cases (>= 576 Rolls)
2 in. x 18 yds.
Actual Size: 48mm x 16.5m
Single Roll (1-23 Rolls)
1 - 5 Cases (24-143 Rolls)
6 - 11 Cases (144-287 Rolls)
12+ Cases (>= 288 Rolls)
3 in. x 18 yds.
Actual Size: 72mm x 16.5m
Single Roll (1-15 Rolls)
1 - 5 Cases (16-95 Rolls)
6 - 11 Cases (96-191 Rolls)
12+ Cases (>= 192 Rolls)
4 in. x 18 yds.
Actual Size: 96mm x 16.5m
Single Roll (1-11 Rolls)
1 - 5 Cases (12-71 Rolls)
6 - 11 Cases (72-143 Rolls)
12+ Cases (>= 144 Rolls)
6 in. x 18 yds.
Actual Size: 144mm x 16.5m
Single Roll (1-7 Rolls)
1 - 5 Cases (8-47 Rolls)
6 - 11 Cases (48-95 Rolls)
12+ Cases (>= 96 Rolls)
8 in. x 18 yds.
Actual Size: 192mm x 16.5m
Single Roll (1-5 Rolls)
1 - 5 Cases (6-35 Rolls)
6 - 11 Cases (36-71 Rolls)
12+ Cases (>= 72 Rolls)
Nominal Tape Widths vs Actual Widths
5% narrower than the NOMINAL width shown in inches. Examples:
Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally
- 1" Nominal width = 15/16" (24mm) Actual width
- 2" Nominal width = 1-7/8" (48mm) Actual width
- 3" Nominal width = 2-13/16" (72mm) Actual width
Note that tape rolls are NOT guaranteed to be splice-free.
May be Available!
Custom Tape Widths
- Need custom sized or "full-cut" width tapes? Many of our tapes come to our converter as full wide width "log rolls" (not pre-cut), and can be custom cut to widths not shown in the pricing table.
- Contact us today for pricing and minimum requirements to order your desired tape in a custom width.
- Please note that since this tape comes in "log roll" format most rolls ship on a plain white core (i.e. with no branding or text inside the core).
Question & Answers
[ viewing reviews 1 through 1 of 1 total ]
Bubba Verified Buyer Dec 24, 2012
Very Nice High Gloss Shine
JVCC HZ-8LP Laminated Premium Hazard Warning Tape [9 mils thick]
I use it to mark areas that present as a fall, trip or potential safety risk. such as steps, loading docks, electrical cords, low ceiling beams, low overhead pipes and such things. It has only a small amount of shrinkage when applied and has a strong adhesive. Holds tight even when exposed to the weather. It has a very nice high gloss finish. It costs more but well worth the extra few cents.
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils