JVCC VEPT-65 Vinyl Electroplating Tape
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
JVCC has recently started getting this tape from another manufacturer so please see the revised specifications for the tape below.
Product Description
JVCC VEPT-65 Vinyl Electroplating Tape is a soft polyvinyl chloride (SPVC) film masking tape designed for use with PCB terminal zone contacts to prevent penetration of chemicals during the plating process. In addition, VEPT-65 can be used as a protection tape for shot peening applications.
JVCC VEPT-65 Vinyl Electroplating tape is extremely conformable and durable for even the most difficult shapes and applications. VEPT-65 is highly resistant to oil, acid, alkalines and corrosive chemicals making this tape an ideal choice for challenging industrial applications. JVCC VEPT-65 Vinyl Electroplating Tape has excellent adhesion to metals and plastics.
Features & Benefits
- Conforms to irregular shapes
- Dependable performance in mechanical and industrial environments
- Excellent bond to metal and plastic surfaces
- Oil, acid, alkaline, and corrosive chemical resistant
Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.
Technical Information
JVCC VEPT-65 Vinyl Electroplating Tape
- Carrier/Backing: soft polyvinyl chloride (SPVC) film
- Adhesive: rubber How are adhesives different?
- Thickness: 6.8 mils (carrier, adhesive) What is mil thickness?
- Adhesion: 17 ounces per inch (to stainless steel test panel)
- Tensile Strength: 16 pounds per inch (longitudinal)
- Service/Operating Temperature: up to 194°F
- Elongation: 100%
- Core: 3" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Roll Sizes/Widths
Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
Please contact us to inquire about pricing for full-cut widths (e.g. a 6 inch roll cut to exactly 152mm instead of 144mm).
Alternative to...
This product can be used as an alternative to the following products(s):
- Permacel #P-35
- 3M #470
- Patco #W1550
- Plymouth Rubber #7
PLEASE NOTE: "Alternative" to is NOT the same as equivalent to so please ensure the specifications listed are suitable for your application.
VEPT-65 Standard sizes
| ROLL SIZE | ITEM # |
ROLLS PER CASE |
QUANTITY ORDERING |
PRICE PER ROLL |
PRICE PER CASE |
|---|
1/2 in. x 36 yds.Actual Size: 12.5mm wide | VEPT-65/ 0536 | 96 | Single Roll (1-95 Rolls) 1 - 4 Cases (96-479 Rolls) 5 - 9 Cases (480-959 Rolls) 10+ Cases (>= 960 Rolls) | | |
3/4 in. x 36 yds.Actual Size: 19mm wide | VEPT-65/ 07536 | 64 | Single Roll (1-63 Rolls) 1 - 4 Cases (64-319 Rolls) 5 - 9 Cases (320-639 Rolls) 10+ Cases (>= 640 Rolls) | | |
1 in. x 36 yds.Actual Size: 25mm wide | VEPT-65/ 136 | 48 | Single Roll (1-47 Rolls) 1 - 4 Cases (48-239 Rolls) 5 - 9 Cases (240-479 Rolls) 10+ Cases (>= 480 Rolls) | | |
1-1/2 in. x 36 yds.Actual Size: 38mm wide | VEPT-65/ 1536 | 32 | Single Roll (1-31 Rolls) 1 - 4 Cases (32-159 Rolls) 5 - 9 Cases (160-319 Rolls) 10+ Cases (>= 320 Rolls) | | |
2 in. x 36 yds.Actual Size: 50mm wide | VEPT-65/ 236 | 24 | Single Roll (1-23 Rolls) 1 - 4 Cases (24-119 Rolls) 5 - 9 Cases (120-239 Rolls) 10+ Cases (>= 240 Rolls) | | |
3 in. x 36 yds.Actual Size: 75mm wide | VEPT-65/ 336 | 16 | Single Roll (1-15 Rolls) 1 - 4 Cases (16-79 Rolls) 5 - 9 Cases (80-159 Rolls) 10+ Cases (>= 160 Rolls) | | |
4 in. x 36 yds.Actual Size: 100mm wide | VEPT-65/ 436 | 12 | Single Roll (1-11 Rolls) 1 - 4 Cases (12-59 Rolls) 5 - 9 Cases (60-119 Rolls) 10+ Cases (>= 120 Rolls) | | |
6 in. x 36 yds.Actual Size: 150mm wide | VEPT-65/ 636 | 8 | Single Roll (1-7 Rolls) 1 - 4 Cases (8-39 Rolls) 5 - 9 Cases (40-79 Rolls) 10+ Cases (>= 80 Rolls) | | |
8 in. x 36 yds.Actual Size: 200mm wide | VEPT-65/ 836 | 6 | Single Roll (1-5 Rolls) 1 - 4 Cases (6-29 Rolls) 5 - 9 Cases (30-59 Rolls) 10+ Cases (>= 60 Rolls) | | |
13 in. x 36 yds.Actual Size: 330mm wide | VEPT-65/ 1336 | 4 | Single Roll (1-3 Rolls) 1 - 4 Cases (4-19 Rolls) 5 - 9 Cases (20-39 Rolls) 10+ Cases (>= 40 Rolls) | | |
51 in. x 36 yds. *uncut log roll | VEPT-65/ 5136 | 1 | Single Roll (1 Roll) 1 - 4 Cases (1-4 Rolls) 5 - 9 Cases (5-9 Rolls) 10+ Cases (>= 10 Rolls) | $207.41 $207.41 $200.93 $194.45 | |
Nominal Tape Widths vs Actual Widths
Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:
- 1" Nominal width = 15/16" (24mm) Actual width
- 2" Nominal width = 1-7/8" (48mm) Actual width
- 3" Nominal width = 2-13/16" (72mm) Actual width
Note that tape rolls are NOT guaranteed to be splice-free.
Custom Tape Widths
May be Available!
- Need custom sized or "full-cut" width tapes? Many of our tapes come to our converter as full wide width "log rolls" (not pre-cut), and can be custom cut to widths not shown in the pricing table.
- Contact us today for pricing and minimum requirements to order your desired tape in a custom width.
- Please note that since this tape comes in "log roll" format most rolls ship on a plain white core (i.e. with no branding or text inside the core).
Question & Answers
User Reviews
[ viewing reviews 1 through 1 of 1 total ]
G
Grillo Verified Buyer Aug 08, 2010
I would buy this product again and again
JVCC VEPT-65 Vinyl Electroplating Tape
jhb, nbcv
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils