- JVCC EL7566-AW Premium Grade Electrical Tape
JVCC EL7566-AW Premium Grade Electrical Tape is a premium grade, all weather PVC electrical insulation tape. It has a synthetic rubber adhesive and is flame retardant and cold resistant. 8 mils thick on a 1.5 inch diameter UL/CSA listed core.
- JVCC E-Tape Colored Electrical Tape
JVCC E-Tape Colored Electrical Tape is a general purpose all-weather PVC film electrical tape with an aggressive rubber resin adhesive that comes in OSHA colors. It is a UL/CSA listed electrical tape with a 1.5 inch inner diameter core. E-Tape Electrical Tape is used for cable coding, quick identification of electrical phases, circuits, feeders, and branches. Flame retardant and cold resistant.
Note: For pre-configured packs consisting of 10 colors each please see 'JVCC E-Tape-Pack Electrical Tape Rainbow Pack' in the related products section to the right (please note that the pre-built Rainbow Packs do not currently include the color pink).
- 3M Scotch 35 Color Coding Vinyl Electrical Tape
3M 35 Color Coding Vinyl Electrical Tape is a premium quality, 7-mil electrical insulating tape. Flame-retardant, weather-resistant; resists UV rays, abrasion, moisture, alkalies, solvents, many acids. For indoor and weather-protected outdoor applications. Stretches to conform to virtually any shape that requires color-coded insulation. Outstanding electrical and mechanical properties make 3M 35 excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas. Available in 9 colors. Please note that rolls do come individually packaged (they are just shrink wrapped).
- Nitto/Permacel P-28 All-Weather Colored Electrical Tape
Permacel P-28 All-Weather Colored Electrical Tape is a premium grade, all-weather multi-purpose electrician's tape. Designed for color coding; phase insulation; identifying motor leads; insulating wire splices and connections; harness wrapping; protecting conduits; and radio, television, appliance repair work. Ideal for industrial maintenance applications and for wrapping tool handles. Resistant to UV rays, moisture, solvents, alkalis and abrasion. It features a durable, flexible PVC film coated with a non-corrosive rubber-based adhesive. Permacel P28 is CSA certified, UL listed, flame retardant, cold and weather resistant. On a 1.5 inch inner diameter core.
- Scapa 175 Cloth Tape
Scapa 175 Cloth Tape is a general purpose conformable cotton cloth tape single coated with a natural rubber adhesive. It's non-thermosetting adhesive and backing are suitable for skin contact. The tape is paintable. Uses of the Scapa 175 Cloth Tape include: motor coil winding; wire harness wrap and other bundling applications; general purpose tape for surfaces requiring a high degree of stain or corrosion resistance where high tensile strength is not required; electrical tape applications; and finger taping.
Note: Please see Jaybird & Mais 299 for other non-coated cloth tape.
- JVCC DVT-76 Dry Vinyl Tape
JVCC DVT-76 Dry Vinyl Tape is a NON-ADHESIVE plasticized polyvinyl chloride film tape. Easy unwinding characteristics - tape clings firmly to its own backing for tight wrap. High elongation and good strength to permit trouble-free binding of wire harnesses for the automotive industry. Dry Vinyl Tape is also used for plating applications - hight stretch, good "cling" characteristics and great conformability provide for superior masking in hard chrome and other plating applications.
- Nashua 386 Stretch & Seal Tape
Nashua 386 Stretch & Seal Tape, is a self-fusing (an adhesive-free tape that fuses only to itself) silicone sealing tape suitable for dozens of applications where a good water-tight seal is needed. Applications for Nashua Stretch & Seal include: sealing pipes, electrical wires, and hoses; covering sharp edges; protecting against rust and corrosion; wrapping tool handles; marking chain and rope.
Nashua 386 creates an instant, permanent water-tight seal and can withstand temperatures from -60DF to +500DF. Chemical and UV resistant. Can be kept in vehicles for
emergency hose repairs. Easy to apply and to remove; no sticky residue left on surfaces.
- JVCC EGPF-02 Kapton Polyimide Film Tape (2 mil)
JVCC EGPF-02 Kapton™ Polyimide Film Tape is a 2 mil electrical grade Kapton alternative POLYIMIDE film coated with a high performance silicone adhesive. It is a wave solder/hot air leveling tape used to protect gold contacts on printed circuit boards from molten solder during hot air wave solder leveling process. It is thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures. Adhesive will thermoset to increase adhesion values. Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects. Permits observation of board during processing. EGPF-02 Kapton Electrical Grade/Printed Circuit Polyimide Film Tape has excellent resistance to acids, oils, solvents, aging, staining and water immersion.
- Shurtape IT-100 Foam Pipe Wrap Insulation Tape (Condensation Inhibiting)
Shurtape IT-100 Pipe Wrap Insulation Tape is a 43 mil foam tape used to cover pipes to inhibit condensation. Designed for covering cold pipes to prevent condensation dripping, or covering hot pipes to reduce heat loss. Aggressive adhesive adheres firmly to all metals. Shurtape IT-100 is used for pipe wrapping so only has adhesive on one side of the tape.
- JVCC EGPF-01 Kapton Polyimide Film Tape (1 mil)
JVCC EGPF-01 Kapton™ Polyimide Film Tape is a 1 mil electrical grade Kapton alternative POLYIMIDE film coated with a high performance silicone adhesive. It is a wave solder/hot air leveling tape used to protect gold contacts on printed circuit boards from molten solder during hot air wave solder leveling process. It is thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures. Adhesive will thermoset to increase adhesion values. Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects. Permits observation of board during processing. EGPF-01 Kapton Electrical Grade/Printed Circuit Polyimide Film Tape has excellent resistance to acids, oils, solvents, aging, staining and water immersion.
- JVCC PWT-10C-SC Economy Corrosion Control Pipe Wrap Tape (Small Core)
JVCC PWT-10C-SC Economy Corrosion Control Pipe Wrap Tape is a 10 mil SPVC pipe wrap/surface protection tape that is highly resistant to sun, water, oil, acids, alkalies, and corrosive chemicals. It comes wound on a 1-1/2" core. Provides electrical protection and protects pipe joints and conduit couplings for overhead or direct buried applications. Bacteria, fungus and abrasion resistant. Flame retardant.
- JVCC E-Tape-Pack Electrical Tape Rainbow Pack
JVCC E-Tape Electrical Tape Rainbow Pack is a pack comprised of 10 different OSHA colors of general purpose all-weather PVC film electrical tape. The tape has an aggressive rubber resin adhesive and the rolls are UL/CSA listed on a 1.5 inch inner diameter core. the 10 colors the pack consists of are: black, blue, brown, green, grey, orange, red, white, yellow and then either pink or purple. E-Tape Electrical Tape is used for cable coding, quick identification of electrical phases, circuits, feeders, and branches. Flame retardant and cold resistant.
Note: If you would like to buy individual colors in any quantity or if you would like to build a custom case of mixed colors please see 'JVCC E-Tape Colored Electrical Tape' in the related products section to the right.
- 3M Scotch Super 33+ Vinyl Electrical Tape
3M Scotch Super 33+ Vinyl Electrical Tape is a black, 7 mil premium grade all-weather vinyl electrical insulating tape with an aggressive adhesive and elastic backing that enables it to easily conform to irregular surfaces for water-resistant electrical and mechanical protection. 3M Super 33+ provides flexibility and easy handling for all around performance. Its PVC backing with its excellent electrical insulating properties provides primary electrical insulation for splices up to 600V and protective jacketing. UL Listed and CSA Certified. Excellent resistance to UV rays, abrasion, moisture, copper corrosion, alkalis and acids, and it is flame-retardant. Excellent all-weather performance in cold to 0DF and it is designed to perform in a continuous temperature environment up to 220DF.
- 3M Scotch 35-Pack Color Coding Electrical Tape Rainbow Pack
3M 35 Color Coding Electrical Tape is a premium quality, 7-mil electrical insulating tape. Flame-retardant, weather-resistant; resists UV rays, abrasion, moisture, alkalies, solvents, many acids. One of each of 9 colors comes shrink-wrapped in a pack. For indoor and weather-protected outdoor applications. Stretches to conform to virtually any shape that requires color-coded insulation. Outstanding electrical and mechanical properties make 3M 35 excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas.
- Patco 85 PVC Cold Weather Electrical Tape
Patco 85 PVC Cold Weather Electrical Tape is used for electrical insulation and sealing in cold weather; for busbar insulation; and for waterproofing. It offers greater thickness & conformability and is extremely flexible in cold weather and is flame retardant. Patco 85 also meets Federal Specification MIL-I-24391B and the UL 510 standard. It conforms snugly, adheres readily under any weather conditions, and is suitable for use up to 11.000V dry or wet.
- JVCC PTFE-2HD Skived Teflon Tape (2 mil, High Density)
JVCC PTFE-2HD Skived Teflon Tape is a 2 mil high density tensilized pure skived Teflon™ (PTFE film) tape with a high temperature silicone adhesive. It comes self-wound without a liner. Used in electrical applications such as harness / coil wraps & separators, transformers and slot liners where good insulation and heat resistance are required. Also used in mechanical applications such as heat sealing bars & jaws, labeling machine pressure pads, chute liners, anti-friction devices, bearings, forming dies, aircraft mold release & guide rails where high temperature, maximum slip and lubricity are required. JVCC PTFE-2HD provides higher tensile strength, lower elongation and higher dielectric strength than regular skived film. It is primarily used for electrical applications listed above & for roll protection in flat die extrusion.
- JVCC PTFE-5 Skived Teflon Tape (5 mil)
JVCC PTFE-5 Skived Teflon Tape is a 5 mil pure skived Teflon™ (PTFE film) tape with a high temperature silicone adhesive. It comes self-wound without a liner. Used in electrical applications such as harness / coil wraps & separators, transformers and slot liners where good insulation and heat resistance are required. Also used in mechanical applications such as heat sealing bars & jaws, labeling machine pressure pads, chute liners, anti-friction devices, bearings, forming dies, aircraft mold release & guide rails where high temperature, maximum slip and lubricity are required. High elongation of PTFE-5 permits tight wrapping and conforms to sharp bends/irregular surfaces.
Image does not show a full 36 yard roll.
- JVCC E-Tape-SC Electrical Tape (Small Core)
JVCC E-Tape-SC Electrical Tape is a general purpose all-weather black PVC film electrical tape with an aggressive rubber resin adhesive. It is a UL/CSA listed electrical tape on a 1 inch inner diameter small core. E-Tape-SC Electrical Tape is used for wire and cable insulation and bundling. Flame retardant and cold resistant.
- Scapa 167 Cohesive Friction Tape
Scapa 167 Cohesive Friction Tape is a black 100% cotton cloth tape, frictioned on both sides with an entirely solvent-free adhesive consisting primarily of synthetic rubber, inorganic fillers, and oil.
Uses of the Scapa 167 Friction Tape include secondary wrap for electrical maintenance and spot holding on wire harnesses. Also can be used as hockey stick blade wrap for better puck control.
- JVCC VEPT-65 Vinyl Electroplating Tape
JVCC VEPT-65 Vinyl Electroplating Tape is a SPVC masking tape designed for use with PCB terminal zone contacts to prevent penetration of chemicals during the plating process and as a protection tape for shot peening applications. The tape is extremely conformable, durable and highly resistant to oil, acid,
alkalines and corrosive chemicals. It also has excellent adhesion to metals and plastics. Meets government specification H-H-T- 0025, AMD 2.
- JVCC PTFE-10 Skived Teflon Tape (10 mil)
JVCC PTFE-10 Skived Teflon Tape is a 10 mil pure skived Teflon™ (PTFE film) tape with a high temperature silicone adhesive. It comes self-wound without a liner. Used in electrical applications such as harness / coil wraps & separators, transformers and slot liners where good insulation and heat resistance are required. Also used in mechanical applications such as heat sealing bars & jaws, labeling machine pressure pads, chute liners, anti-friction devices, bearings, forming dies, aircraft mold release & guide rails where high temperature, maximum slip and lubricity are required.
Image does not show a full 18 yard roll.
- JVCC PTFE-GC-10 Teflon Glass Cloth Tape (9.1 mil)
JVCC PTFE-GC-10 Teflon Glass Cloth Tape is a 9.1 mil Teflon™ (PTFE) impregnated fiberglass cloth, consisting of warp and fill yarns, and coated with a high temperature silicone adhesive. It offers excellent electrical, mechanical and chemical properties. Used as a primary insulation/protective barrier in a variety of electrical equipment and heat sealing bars, chute liners, gaskets, bearing surfaces, tabletop covers, guide rails and roll covers. The tape has a low friction surface and is abrasion resistant. It comes either self-wound without a liner or with a release liner (please note though that the 1/2 and 3/4 inch width sizes can only come self-wound).
Image does not show a full 36 yard roll.
- JVCC PTFE-GC-3 Teflon Glass Cloth Tape (2.8 mil)
JVCC PTFE-GC-3 Teflon Glass Cloth Tape is a 2.8 mil Teflon™ (PTFE) impregnated fiberglass cloth, consisting of warp and fill yarns, and coated with a high temperature silicone adhesive. It offers excellent electrical, mechanical and chemical properties. Used as a primary insulation/protective barrier in a variety of electrical equipment and heat sealing bars, chute liners, gaskets, bearing surfaces, tabletop covers, guide rails and roll covers. The tape has a low friction surface and is abrasion resistant. It comes either self-wound without a liner or with a release liner (please note though that the 1/2 and 3/4 inch width sizes can only come self-wound).
Image does not show a full 36 yard roll.
- JVCC PWT-10C Economy Corrosion Control Pipe Wrap Tape
JVCC PWT-10C Economy Corrosion Control Pipe Wrap Tape is a 10 mil SPVC pipe wrap/surface protection tape that is highly resistant to sun, water, oil, acids, alkalies, and corrosive chemicals. Provides electrical protection. Protects pipe joints and conduit couplings for overhead or direct buried applications. Bacteria, fungus and abrasion resistant. Flame retardant.
- JVCC PTFE-GC-5 Teflon Glass Cloth Tape (4.6 mil)
JVCC PTFE-GC-5 Teflon Glass Cloth Tape is a 4.6 mil Teflon™ (PTFE) impregnated fiberglass cloth, consisting of warp and fill yarns, and coated with a high temperature silicone adhesive. It offers excellent electrical, mechanical and chemical properties. Used as a primary insulation/protective barrier in a variety of electrical equipment and heat sealing bars, chute liners, gaskets, bearing surfaces, tabletop covers, guide rails and roll covers. The tape has a low friction surface and is abrasion resistant. It comes either self-wound without a liner or with a release liner (please note though that the 1/2 and 3/4 inch width sizes can only come self-wound).
Image does not show a full 36 yard roll.
- JVCC PTFE-GC-6 Teflon Glass Cloth Tape (5.4 mil)
JVCC PTFE-GC-6 Teflon Glass Cloth Tape is a 5.4 mil Teflon™ (PTFE) impregnated fiberglass cloth, consisting of warp and fill yarns, and coated with a high temperature silicone adhesive. It offers excellent electrical, mechanical and chemical properties. Used as a primary insulation/protective barrier in a variety of electrical equipment and heat sealing bars, chute liners, gaskets, bearing surfaces, tabletop covers, guide rails and roll covers. The tape has a low friction surface and is abrasion resistant. It comes either self-wound without a liner or with a release liner (please note though that the 1/2 and 3/4 inch width sizes can only come self-wound).
Image does not show a full 36 yard roll.
- JVCC PWT-20C Heavy Duty Corrosion Control Pipe Wrap Tape
JVCC PWT-20C Heavy Duty Corrosion Control Pipe Wrap Tape is a 20 mil SPVC pipe wrap/surface protection tape that is highly resistant to sun, water, oil, acids, alkalies, and corrosive chemicals. Provides electrical protection. Protects pipe joints and conduit couplings for overhead or direct buried applications. Bacteria, fungus and abrasion resistant. Flame retardant.
- JVCC GC-SIL-7 Electrical Grade Glass Cloth Tape (Silicone Adhesive)
JVCC GC-SIL-7 Electrical Grade Glass Cloth Tape is coated with silicone adhesive and is conformable, printable, and chemical & solvent resistant. Designed for use in strategic area masking of areas in thermal and plasma spray applications. Used for insulation of electrical apparatus, coil wrap, and for sealing and bundling of non-electrical applications where flame retardancy or high heat resistance is required. UL approval insulation class: 180DC Class H.
- JVCC FR-1 Friction Tape
JVCC FR-1 Friction Tape is a black cotton cloth with a non-corrosive rubber resin adhesive. Its cloth backing makes this tape easily hand tearable an extremely conformable. Highly resistant to humidity and galvanic corrosion. Holds tightly on rough and irregular surfaces, its adhesive system will not dry out. JVCC FR-1 Friction Tape is used for insulation and to protect industrial harnesses and electrical wires from physical damage caused by friction, or over wrapping low voltage splices and general electrical maintenance jobs.
NOTE: By the nature of how friction tape is constructed larger width rolls like 1-1/2 and 2 inch are hard to unwind cleanly.
- Jaybird & Mais 310 Black Friction Blade Tape
Jaybird & Mais 310 Black Friction Blade Tape is a double-sided black cloth tape designed to be used on hockey stick blades for greater puck control and blade protection. Jaybird & Mais 310 is a co-adhesive tape frictioned on both sides with an ultra durable black rubber adhesive. Sometimes referred to as "Gordie Howe" tape.
- FindTape Electrician Tape Pack
Our FindTape Electrician Tape Pack is an assortment of a variety of electrical tapes we sell which can easily be purchased together as one pack designed to meet all your electrical tape needs.
The following items are included:
%GroupingChildren%
- JVCC EL1266-AW Heavy Duty Electrical Tape
JVCC EL1266-AW Heavy Duty Electrical Tape is a high grade, all weather PVC electrical tape. It is an electrical insulation tape with synthetic rubber adhesive which is flame and cold resistant.
JVCC EL1266-AW Heavy Duty Electrical Tape benefits include:
No corrosion of copper, brass, steel, or aluminum.
No cracking, flagging, or corrosive effects when exposed to heat/cold.
Wound on 1-1/2 inch diameter core with UL-510 and CSA C22.2 No.
197 in core.
NOTE: Product has been discontinued by manufacturer. No inventory remains.
- JVCC GC-SIL-10 Electrical Grade Glass Cloth Tape (Silicone Adhesive)
JVCC GC-SIL-10 Electrical Grade Glass Cloth Tape is coated with 2.8 mils of silicone adhesive to provide maximum chemical, solvent and heat resistance. Used for soft cell insulation, phase insulation in integral HP motors, high temperature harness wrapping, flame retardant coil armor wrap,
banding heavy conductor coils. An excellent all-purpose tape capable of resisting moderate grit blasting. Insulation class: 200D C Class H. Meets flammability requirements of UL510.
NOTE: JVCC GC-SIL-10 is no longer being manufactured.
