Retailer of Tape, Glues/Adhesives & Dispensers

JVCC PTFE-2HD

JVCC PTFE-2HD Skived PTFE Film Tape [High Density, 2 mil carrier]

JVCC PTFE-2HD Skived PTFE Film Tape [High Density, 2 mil carrier]

Print Page
5 Reviews
Ask a Question
  • Quantity
    View Full Pricing Table
    View "Full Pricing Table" below for detailed pricing and additional sizes!
  • Color
    Milky Grey
  • Roll Size *
    Purchased Most Frequently: 1/2 in x 36 yds. (Milky Grey) | See Pricing Table below for additional options.
  • Price
    $ Price/photo will update once color & size have been chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

JVCC PTFE-2HD Skived PTFE Film Tape is a 2 mil high density tensilized pure skived PTFE film tape with a high-temperature silicone adhesive. It comes self-wound without a liner. Used in electrical applications such as harness/coil wraps & separators, transformers and slot liners where good insulation and heat resistance are required. Also used in mechanical applications such as heat sealing bars & jaws, labeling machine pressure pads, chute liners, anti-friction devices, bearings, forming dies, aircraft mold release & guide rails where high temperature, maximum slip, and lubricity are required. JVCC PTFE-2HD provides higher tensile strength, lower elongation, and higher dielectric strength than regular skived film. It is primarily used for electrical applications listed above and for roll protection in flat die extrusion. Made in the U.S.

If your order will not be for a full case and you require certificate of conformance documentation to ship with your order please see our policy at https://www.findtape.com/customer/help.aspx#p4 so that the proper request (and charge) can be made at the time the order is placed.
* Multiple cases may be shipped per package in order to minimize the charge for shipping.

 

Technical Information

JVCC PTFE-2HD Skived PTFE Film Tape
  • Standards Met: MIL-I-23594C Type 1 (revised spec. CID A-A-59474)
  • Carrier/Backing: polytetrafluoroethylene (PTFE) film / pure skived
  • Adhesive: silicone   How are adhesives different?
  • Thickness: 3.5 mils (carrier, adhesive) 2 mils (carrier)   What is mil thickness?
  • Adhesion: 25 ounces per inch (to stainless steel test panel)
  • Tensile Strength: 30 pounds per inch (longitudinal)
  • Dielectric Breakdown: 8000 volts
  • Service/Operating Temperature: -100°F to 500°F
  • Elongation: 100%
  • Core: 3" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Alert Roll Sizes/Widths

Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).

Alternative To

Alternative to...

This product can be used as an alternative to the following products(s):

  • 3M #5480
  • Permacel #P422
  • DeWal #204-2HD
  • St. Gobain #2255-2
  • Taconic #6445-02
  • Chemfab #380-02
  • Lanmar #585-2
  • Bondtec #932F
PLEASE NOTE: "Alternative" to is NOT the same as equivalent to so please ensure the specifications listed are suitable for your application.
View related products we sell to this item.

PTFE-2HD Standard sizes

ROLL SIZEITEM # ROLLS PER CASE QUANTITY ORDERING PRICE PER ROLL PRICE PER CASE

1/2 in. x 36 yds.

Actual Size: 12.7mm wide

PTFE-2HD/ 053624

Single Roll (1-11 Rolls)

½ Case (12-23 Rolls)

1 - 2 Cases (24-71 Rolls)

3+ Cases (>= 72 Rolls)

$27.51

$24.87

$24.15

$22.24

N/A

N/A

$579.60

$533.76

3/4 in. x 36 yds.

Actual Size: 19.0mm wide

PTFE-2HD/ 0753616

Single Roll (1-7 Rolls)

½ Case (8-15 Rolls)

1 - 2 Cases (16-47 Rolls)

3+ Cases (>= 48 Rolls)

$40.46

$36.42

$35.52

$33.22

N/A

N/A

$568.32

$531.52

1 in. x 36 yds.

Actual Size: 25.4mm wide

PTFE-2HD/ 13612

Single Roll (1-5 Rolls)

½ Case (6-11 Rolls)

1 - 2 Cases (12-35 Rolls)

3+ Cases (>= 36 Rolls)

$50.98 $52.93

$47.56

$46.47

$44.35

N/A

N/A

$557.64

$532.20

2 in. x 36 yds.

Actual Size: 50.8mm wide

PTFE-2HD/ 2366

Single Roll (1-2 Rolls)

½ Case (3-5 Rolls)

1 - 2 Cases (6-17 Rolls)

3+ Cases (>= 18 Rolls)

$102.90

$92.18

$90.34

$88.96

N/A

N/A

$542.04

$533.76

Nominal Tape Widths vs Actual Widths

Nominal vs. Actual Widths Zoom In

Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:

  • 1" Nominal width = 15/16" (24mm) Actual width
  • 2" Nominal width = 1-7/8" (48mm) Actual width
  • 3" Nominal width = 2-13/16" (72mm) Actual width

Note that tape rolls are NOT guaranteed to be splice-free.

PTFE-2HD Special Order Sizes

ROLL SIZEITEM # ROLLS PER CASE QUANTITY ORDERING PRICE PER ROLL PRICE PER CASE

1/4 in. x 36 yds.

Actual Size: 6.3mm wide

Approximately 3 extra business days to ship
PTFE-2HD/ 0253648

Single Roll (1-23 Rolls)

½ Case (24 Rolls)

1 - 2 Cases (48, 96 Rolls)

3+ Cases (144, 192, 240, ... Rolls)

½ case minimum

$12.99

$12.48

$11.38

N/A

N/A

$599.04

$546.24

5/16 in. x 36 yds.

Actual Size: 7.9mm wide

Approximately 3 extra business days to ship
PTFE-2HD/ 031253640

Single Roll (1-19 Rolls)

½ Case (20 Rolls)

1 - 2 Cases (40, 80 Rolls)

3+ Cases (120, 160, 200, ... Rolls)

½ case minimum

$16.17

$15.60

$14.24

N/A

N/A

$624.00

$569.60

3/8 in. x 36 yds.

Actual Size: 9.5mm wide

Approximately 3 extra business days to ship
PTFE-2HD/ 0383632

Single Roll (1-15 Rolls)

½ Case (16 Rolls)

1 - 2 Cases (32, 64 Rolls)

3+ Cases (96, 128, 160, ... Rolls)

½ case minimum

$18.96

$18.34

$16.77

N/A

N/A

$586.88

$536.64

7/8 in. x 36 yds.

Actual Size: 22.2mm wide

Approximately 3 extra business days to ship
PTFE-2HD/ 08753614

Single Roll (1-6 Rolls)

½ Case (7 Rolls)

1 - 2 Cases (14, 28 Rolls)

3+ Cases (42, 56, 70, ... Rolls)

½ case minimum

$43.29

$42.27

$38.92

N/A

N/A

$591.78

$544.88

1-1/2 in. x 36 yds.

Actual Size: 38.1mm wide

Approximately 3 extra business days to ship
PTFE-2HD/ 15368

Single Roll (1-3 Rolls)

½ Case (4 Rolls)

1 - 2 Cases (8, 16 Rolls)

3+ Cases (24, 32, 40, ... Rolls)

½ case minimum

$69.58

$68.13

$66.36

N/A

N/A

$545.04

$530.88

3 in. x 36 yds.

Actual Size: 76.2mm wide

Approximately 3 extra business days to ship
PTFE-2HD/ 3364

Single Roll (1 Roll)

½ Case (2 Rolls)

1 - 2 Cases (4, 8 Rolls)

3+ Cases (12, 16, 20, ... Rolls)

½ case minimum

$136.67

$134.09

$133.47

N/A

N/A

$536.36

$533.88

5 in. x 36 yds.

Actual Size: 127mm wide

Approximately 3 extra business days to ship
PTFE-2HD/ 5364

Single Roll (1 Roll)

½ Case (2 Rolls)

1 - 2 Cases (4, 8 Rolls)

3+ Cases (12, 16, 20, ... Rolls)

½ case minimum

$227.58

$223.48

$222.44

N/A

N/A

$893.92

$889.76

21-1/2 in. x 36 yds. **uncut log roll

Actual Size: 546mm wide

Approximately 3 extra business days to ship
PTFE-2HD/ 215361

Single Roll (1 Roll)

½ Case (1 Rolls)

1 - 2 Cases (1, 2 Rolls)

3+ Cases (3, 4, 5, ... Rolls)

$852.93

$852.93

$838.42

$836.40

N/A

N/A

$838.42

$836.40

Special Order Policies & Footnotes:

Special Order Policies

  • Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
  • Special order sizes often ship direct from our supplier so will not arrive together with stocked products.

Special Order Minimums

  • Minimum requirements apply because a size may be non-stock.
  • Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).

Question & Answers

User Reviews

[ viewing reviews 1 through 5 of 5 total ]
LR
Louski R. Verified Buyer Jun 05, 2018
It works good. Once it
JVCC PTFE-2HD Skived PTFE Film Tape [High Density, 2 mil carrier]
It works good. Once it gets wet it has to be changed.
MW
Matthew W. Verified Buyer Feb 05, 2018
Skived Teflon
JVCC PTFE-2HD Skived PTFE Film Tape [High Density, 2 mil carrier]
First test shows just the right amount of adhesive to hold to anodized aluminum for photography equipment, making home-made smooth and firm sliding mounts possible. Great service from FindTape by mail too!
MT
Mark T. Verified Buyer Jan 23, 2018
Teflon Tape
JVCC PTFE-2HD Skived PTFE Film Tape [High Density, 2 mil carrier]
Works great!
MJ
Michael J. Verified Buyer Jun 06, 2017
Expensive tape
JVCC PTFE-2HD Skived PTFE Film Tape [High Density, 2 mil carrier]
Understandably expensive tape for high voltage applications. Teflon is quite soft and readily deflects. You can see this on either side of the tape where it is cut from a larger roll.
QMB
Quality Minded Business Owner Verified Buyer Jun 01, 2016
Excellant Product
JVCC PTFE-2HD Skived PTFE Film Tape [High Density, 2 mil carrier]
Using this product for additional insulation against electrical shorts.
JVCC PTFE-2HD Skived PTFE Film Tape [High Density, 2 mil carrier]
Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Shopping Cart Summary
VIEW CART - or - PROCEED TO CHECKOUT
Continue Shopping

Newsletter Signup

Sign up today to be notified of upcoming deals and exclusive offers!

Adhesive Tape Blog
Video Resource Library
How-To Resource Articles
See also
Electrical Tapes
Tapes for Scrapbooking