Office, Shipping, DIY/Home, Crafting, Health, Sports & More

3M FBS Fire Barrier Sealant

Print Page
4 Reviews
Ask a Question
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
  • Item Size
     
    Purchased Most Frequently: 10.1 fl. oz. cartridge / 3 hour (Yellow)
  • Price
    $ Price/photo will update once color & size have been chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

3M Fire Barrier Sealant is a high-strength, single-component, moisture-curing, gap-filling polyurethane adhesive that creates high strength bonds on a wide variety of materials including plastics, metals, fiberglass and wood. 3M™ Polyurethane Adhesive Sealant 560 is a single-component, moisture-curing polyurethane sealant used to bond a wide variety of materials, including plastics, fiberglass reinforced plastic (FRP), sheet molding compound (SMC), aluminum, steel, coated metal and wood. It exhibits high tensile strength, good UV resistance, mid-range Shore A Hardness and high modulus in a wide variety of extreme service environments. Available in cartridge, sausage pack and drum volumes to meet your application needs.

Features & Benefits: Fire Barrier Water Tight Sealant 1000 NS

Our 3M™ Fire Barrier Water Tight Sealant 1000 NS is a non-slump, ready-to-use, single component, neutral cure, silicone sealant that cures upon exposure to atmospheric humidity to form a flexible firestop seal. Our water tight sealants help control the spread of fire, smoke and noxious gases before, during and after exposure to fire.

  • Firestop tested up to 3 hours in accordance with ASTM E814 (UL 1479) and CAN/ULC-S115
  • Fire resistance tested for construction joint (including curtain wall) systems in accordance with ASTM E 1966 (UL 2079), ASTM E 2307
  • Excellent caulk rate and sealant can be applied with conventional caulking equipment
  • Non-slump, halogen-free formula provides strong adhesion
  • Exceptional weatherability for durability during construction
  • Minimizes noise transfer (STC-Rating of 56 when tested in STC 56-rated wall assembly)
  • Formulated as a re-enterable and repairable solution
  • Sealant is paintable with primer

Features & Benefits: Fire Barrier Water Tight Sealant 3000 WT

3M™ Fire Barrier Water Tight Sealant 3000 WT provides up to 4-hour fire protection in tested and listed systems. It is a gun-grade, intumescent, silicone, elastomeric sealant that cures upon exposure to the atmosphere to form a monolithic flexible firestop seal. Properly installed, this sealant helps control the spread of fire, smoke and noxious gasses before, during and after exposure to fire and exhibits good adhesion to a full range of construction substrates.

  • Firestop tested up to 4 hours in accordance with ASTM E814 (UL 1479) and CAN/ULC-S114
  • High-solids formula produces limited shrinkage
  • Continuous seal remains pliable and allows for typical pipe movement
  • Re-enterable and repairable fire barrier sealant
  • Offers excellent sealant and caulking properties
  • Sealant helps minimize noise transfer

Features & Benefits: Fire Barrier Sealant CP 25WB+

Is a red, one-component, gun-grade, latex-based, intumescent firestop sealant. This fire barrier sealant helps control the spread of fire, smoke and noxious gases before, during and after exposure to a fire.

  • Firestop tested for through penetration applications up to 4 hours in accordance with ASTM E814 (UL 1479) and CAN/ULC-S115
  • Sag-resistant properties offer clean application as well as strong adhesion in both wall and floor applications
  • Water-based and paintable sealant provides easy application and clean-up
  • Sealant is re-enterable and repairable
  • Fire resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079)
  • Sealant helps minimize sound transfer

Features & Benefits: Fire Barrier Sealant IC 15WB+

Is a yellow, one-part, gun-grade, intumescent firestop sealant that provides up to 3-hour fire protection in tested and listed systems. This helps prevent the spread of fire, smoke and noxious gas, while also acting as an acoustic barrier to help minimize noise transfer.

  • Firestop tested for through penetration applications for up to 3 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115
  • Sealant designed to help minimize sound transfer
  • Water-based and paintable sealant provides easy application and clean-up
  • Exceptional adhesion for long-term performance
  • Applied with conventional caulking equipment with excellent caulk rate
  • Sag-resistant properties offer clean application as well as strong adhesion
  • Sealant is re-enterable and repairable
  • Fire resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079)
Made in the U.S.

Application Instructions

Surface Preparation: Surfaces to be sealed or bonded should be clean and dry. Surfaces should be free from grease, mold release, oil, water/condensation, and other contaminants that may affect the adhesion of the sealant. Abrading with 180 to 220 grit abrasive followed by a solvent wipe will improve the bond strength. Suitable solvents include 3M™ Adhesive Remover or methyl ethyl ketone (MEK).

* Multiple cases may be shipped per package in order to minimize the charge for shipping.

 

Technical Information

3M FBS Fire Barrier Sealant
  • Format: Cartridge
  • Material: Polyurethane
  • Compatible Material: Plastic , Metals , Fiberglass , Wood
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Download Datasheets

The following downloads are available for this product:

Download Brochure

FBS Standard sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

10.1 fl. oz. cartridge / 3 hour

IC 15WB+

UPC = 051115165573
12

Single Item (1-11 Items)

1 - 4 Cases (12-59 Items)

5 - 9 Cases (60-119 Items)

10+ Cases (>= 120 Items)

$7.35

$6.35
a 14% discount

$6.24
a 15% discount

$6.14
a 16% discount

N/A

$76.20

$74.88

$73.68

10.1 fl. oz. cartridge / Water Tight / 3 hour

1000 NS

UPC = 051115115356
12

Single Item (1-11 Items)

1 - 4 Cases (12-59 Items)

5 - 9 Cases (60-119 Items)

10+ Cases (>= 120 Items)

$15.98

$15.49
a 3% discount

$15.48
a 3% discount

$15.47
a 3% discount

N/A

$185.88

$185.76

$185.64

Question & Answers

User Reviews

3M FBS Fire Barrier Sealant
Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Shopping Cart Summary
Recently Viewed Products

Newsletter Signup

Sign up today to be notified of upcoming deals and exclusive offers!

Adhesive Tape Blog
Video Resource Library
How-To Resource Articles
See also
Electrical Tapes
Tapes for Scrapbooking