'3M ML' is out of stock and not currently available for purchase on the site.
3M ML Metaliks Sport Protective Eyewear
3M Metaliks Sport Protective Eyewear combines the best of contemporary styling with practical eye protection. Brushed nickel or polished metal frames look distinctive and sporty. High-wrapped lenses complement sleek styling along with a wider-viewing area. Designed for practicality, the safety glasses also build in numerous comfort features, including a soft and adjustable nose bridge and soft-tipped temples to cushion high contact points. These safety glasses are recommended for the following tasks: chipping, chiseling, drilling, grinding, machining, masonry, pouring/casting, power fastening, riveting, sanding and sawing. Industries in which these safety glasses are commonly used include aviation, chemicals, construction, food and beverage, general manufacturing, mining, oil and gas, pharmaceuticals, primary metals, and transportation. Meets the requirements of CSA Z94.3 and the high impact requirements of ANSI Z87.1-2015.
Features & Benefits
- Brushed nickel or polished metal frames and sport-styled lenses look handsome.
- High wrap lenses for a greater viewing area.
- Soft, adjustable nose bridge customizes comfort to the wearer.
- Spatula-styled temples with soft tips look cutting-edge modern.
- Polycarbonate lenses absorb 99.9% UV.
Made in the U.S.
3M ML Metaliks Sport Protective Eyewear
- Standards Met: CSA Z94.3; ANSI Z87.1-2015
- Lens: Clear Anti-Fog
Note: Specifications are those given by manufacturers and are not tested for accuracy.
The following downloads are available for this product:
Question & Answers
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils