DAP Tank Bond Clear Epoxy
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
BACKORDER NOTE *** you can choose to be notified via text when an item is back in stock
Item is expected in approximately 42 day(s)
DAP Tank Bond Clear Epoxy is a fast-setting 2-part epoxy that dries clear and creates a strong, durable bond on a wide range of substrates. With a 5-minute set time and 3,000 psi bond strength, choose this clear, gap-filling epoxy to create high-strength, durable repairs that super glues and all-purpose adhesives just can’t handle.
Features & Benefits
- Dries clear - for clean looking repairs
- Sets in 5 minutes
- 3,000 psi - high strength, durable bond
- Bonds metal, plastic, tiles, ceramic, glass, stone, and wood.
- Interior/exterior use
- Water resistant
- Easy-to-use syringe with built-in storage cap
Made in the U.S.
- Remove tip from syringe.
- Remove and save storage cap from center of plunger.
- Push syringe plunger down steadily to ensure even amounts of resin and hardener are dispensed until desired amount is present.
- Mix 2 parts together evenly until mixture has the same consistency throughout.
- Apply mixture to bonding surface.
- Join bonding surfaces together within 5 minutes of mixing 2 parts together.
- Clamp or brace bonded surfaces together.
- Wait at least 4 hours for full bond strength.
Note: Not suitable for bonding polyethylene or polypropylene, or PTFE plastics.
DAP Tank Bond Clear Epoxy
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Tank Bond Standard sizes
|ITEM SIZE||ITEM #
||ITEMS PER CASE
||PRICE PER ITEM
||PRICE PER CASE
0.85 fl. oz.
UPC = 070798001688
Single Item (1-5 Items)
1 - 2 Cases (6-17 Items)
3 - 4 Cases (18-29 Items)
5+ Cases (>= 30 Items)
a 16% discount
a 17% discount
a 18% discount
Question & Answers
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils