Retailer of Tape, Glues/Adhesives & Dispensers

Gorilla Waterproof

Gorilla Waterproof Patch & Seal Tape

  • Quantity
    View Full Pricing Table
    View "Full Pricing Table" below for detailed pricing and additional sizes!
  • Color
    Black
  • Item Size
    4 in. x 10 ft.
  • Price
    $ Price/photo will update once color & size have been chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

Gorilla Waterproof Patch & Seal Tape instantly seals out water, air, and moisture. With an extra thick adhesive layer and UV resistant backing this tape conforms to form a permanent bond indoors and out. At 4 inch wide use it to patch holes, cracks, gaps and tears, even underwater. Excellent for Home, Auto, Marine, Camping, RVs, Outdoors, and more.

Performance will be dependent on surfaces & conditions. Surfaces must be clean, smooth and non-porous. Water must be pressed out from underneath tape. Not for use on seams, applications under pressure, or automotive applications under the hood. May not adhere to silicone or water-repellent materials. Do not use to hang. Permanent: may damage surface if removed.

Features and Benefits

  • Waterproof
  • Works underwater
  • Indoor/outdoor
  • Instantly seals out water, air, & moisture
  • Permanent bond
  • 2x more tape compared to 5 foot flexible tapes
Made in the U.S.

Application Instructions

For best results, apply the tape to a clean surface at room temperature.

  1. Keeping liner on tape, cut tape to desired size. Tape size should be larger than the repair area, extending beyond all edges.
  2. Remove the release liner and place tape over desired repair area. Tape cannot be repositioned once applied.
  3. Rub entire surface of the tape aggressively, especially the edges.
* Multiple cases may be shipped per package in order to minimize the charge for shipping.

 

Technical Information

Gorilla Waterproof Patch & Seal Tape
  • Carrier/Backing: low density polyethylene (LDPE)
  • Adhesive: rubber   How are adhesives different?
  • Release Liner: paper
  • Core: 3" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Waterproof Standard sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

4 in. x 10 ft.

46125024

Single Item (1-3 Items)

1 - 2 Cases (4-11 Items)

3 - 4 Cases (12-19 Items)

5+ Cases (>= 20 Items)

$11.48 $12.98

$9.58

$9.50

$9.42

N/A

$38.32

$38.00

$37.68

Gorilla Waterproof Patch & Seal Tape
Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Shopping Cart Summary
Recently Viewed Products

Newsletter Signup

Sign up today to be notified of upcoming deals and exclusive offers!

Adhesive Tape Blog
Video Resource Library
How-To Resource Articles
See also
Electrical Tapes
Tapes for Scrapbooking