Intertape PMB Blast Impact Masking Tape (BT100)

Print Page
Ask a Question
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
  • Size
    Purchased Most Frequently: 2 in. x 30 ft. (Cream)
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

This IPG BT100 PMB Blast Impact Masking Tape is the ideal product for masking surfaces while you are removing dry strip paint or performing any other shot-peen procedure on them. It remains flexible, and resists cracking and lifting; it conforms to irregular, curved surfaces. Designed with a rigid rubber construction, it prevents small blast media particles and other foreign debris from entering and damaging sensitive surfaces, components, and control systems. Aggressive acrylic pressure-sensitive adhesive provides instant adhesion to cleaning. The removal process is easy and clean, and the material is also eco-friendly and safe to use. A total of three sizes are available: 2-inches, 4-inches, and 6-inches; all measurements are 10 yards long.

Features & Benefits

  • Helpful in masking surfaces when stripping paint or performing shot-peening
  • Material is eco-friendly, safe to use, and easy to remove
  • Flexible, resistant to cracking, and conforms to irregular, curved surfaces
  • Cleaning is made easier with aggressive acrylic pressure-sensitive adhesive
Country of Origin: United States.


Technical Information

Intertape PMB Blast Impact Masking Tape (BT100)
  • Carrier/Backing: rubber
  • Adhesive: acrylic   How are adhesives different?
  • Release Liner: white
  • Thickness: 46 mils (carrier, adhesive)   What is mil thickness?
  • Adhesion: 50 ounces per inch (to stainless steel test panel)
  • Tensile Strength: 5.5 pounds per inch (longitudinal)
  • Service/Operating Temperature: up to 1°F
  • Elongation: 400%
  • Core: 3" diameter
  • Color: White
  • Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Download Datasheets

The following downloads are available for this product:

Download Technical Data Sheet

BT100 Standard sizes


2 in. x 10 yds.


UPC = 653461665693

Single Item (1-23 Items)

1 - 4 Cases (24-119 Items)

5 - 9 Cases (120-239 Items)

10+ Cases (>= 240 Items)


a 4% discount

a 5% discount

a 6% discount





4 in. x 10 yds.


UPC = 880322348161

Single Item (1-7 Items)

1 - 4 Cases (8-39 Items)

5 - 9 Cases (40-79 Items)

10+ Cases (>= 80 Items)


a 3% discount

a 4% discount

a 5% discount





BT100 Special Order Sizes


6 in. x 10 yds.

Approximately 30 extra business days to ship

Single Item (1-7 Items)

1 - 4 Cases (8, 16, 24, ... Items)

5 - 9 Cases (40, 48, 56, ... Items)

10+ Cases (80, 88, 96, ... Items)

1 case minimum

a 3% discount

a 4% discount

a 5% discount





   Please Read

Special Order Policies

  • Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
  • Special order sizes often ship direct from our supplier so will not arrive together with stocked products.

Special Order Minimums

  • Minimum requirements apply because a size may be non-stock or if special setup is required to cut rolls to your desired custom width.
  • Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).

Question & Answers

User Reviews

Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Continue Shopping
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles