JVCC AF22-BLK Matte Black Aluminum Foil Tape
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
BACKORDER NOTE *** orders can be placed for backordered items at any time
Item is expected in approximately 18 day(s)
JVCC AF22-BLK Matte Black Aluminum Foil Tape is a matte-black colored non-reflective aluminum foil tape coated with a pressure-sensitive clear acrylic adhesive (underside of tape looks like uncolored silver aluminum foil). The tape comes on a white paper release liner. The tape features a malleable foil which confirms well to irregular and curves surfaces. Its aggressive adhesive provides quick, positive grab. AF22-BLK is great for temporary light control as the tape easily confirms and adheres to light fixtures and/or barn doors. It has a mate black finish that does not reflect light, but absorbs light from ambient light sources. The tape performs well at both low and elevated temperatures and is flame retardant. It is primarily used in the entertainment industry for blocking and suppressing spills and leakages on heat generating equipment such as projectors, light cans, barndoors, and similar equipment. Lighting decorators / engineers can use it to create shadows, form barn doors and adapt gobos. Used in situations where extreme heat might otherwise burn flags or cutters,. Also used in the construction industry for joining elastomeric insulation systems.
The surface to which the tape is applied should be clean, dry and free of any grease or oil. It should also be stored at 70°F / 50% relative humidity and out of direct sunlight.
Warning: This product can expose you to chemicals including Toluene, which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.
If your order will not be for a full case and you require certificate of conformance documentation to ship with your order please see our policy at http://www.findtape.com/customer/help.aspx#p4
so that the proper request (and charge) can be made at the time the order is placed.
JVCC AF22-BLK Matte Black Aluminum Foil Tape
- Adhesive: acrylic How are adhesives different?
- Carrier/Backing: aluminum foil
- Release Liner: paper
- Thickness: 3.7 mils (carrier, adhesive) 1.5 mils (adhesive) 2.2 mils (carrier) What is mil thickness?
- Adhesion: 59 ounces per inch (to stainless steel test panel)
- Tensile Strength: 25.7 pounds per inch (longitudinal)
- Service/Operating Temperature: -40°F to 302°F
- Elongation: 4%
- Core: 3" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
AF22-BLK Standard sizes
|ROLL SIZE||ITEM #
||ROLLS PER CASE
||PRICE PER ROLL
||PRICE PER CASE
2 in. x 27 yds.
Actual Size: 50mm wide
Single Roll (1-23 Rolls)
1 - 2 Cases (24-71 Rolls)
3 - 4 Cases (72-119 Rolls)
5+ Cases (>= 120 Rolls)
Nominal Tape Widths vs Actual Widths
5% narrower than the NOMINAL width shown in inches. Examples:
Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally
- 1" Nominal width = 15/16" (24mm) Actual width
- 2" Nominal width = 1-7/8" (48mm) Actual width
- 3" Nominal width = 2-13/16" (72mm) Actual width
Note that tape rolls are NOT guaranteed to be splice-free.
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils