JVCC LF-5R Lead Foil Tape [Rubber Adhesive]

Name: JVCC LF-5R Lead Foil Tape [Rubber Adhesive]
Brand: JVCC
Rating: 4.6 (5 reviews)

Print Page

Quantity

Rolls Cases

View "Full Pricing Table" below for detailed pricing and additional sizes!
Color

Silver
Roll Size *

Purchased Most Frequently: 4 in. x 36 yds. (Silver) | See Pricing Table below for additional options.
Price

$ Price/photo will update once color & size have been chosen.

Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

JVCC LF-5R Lead Foil Tape is a 100% pure lead foil tape with a rubber based adhesive system which exhibits excellent adhesion to a wide variety of surfaces; especially to metal, glass, films, foils, and papers. Highly malleable and can be shaped to the most intricate patterns. Used for stop off masking during electroplating; to add weight to golf clubs; and also used as an electromagnetic and radio frequency shield. Made in the U.S.

Warning: This product can expose you to chemicals including Lead, which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.

* Multiple cases may be shipped per package in order to minimize the charge for shipping.

Technical Information

JVCC LF-5R Lead Foil Tape

Adhesive: rubber How are adhesives different?
Carrier/Backing: lead foil
Release Liner: paper
Thickness: 6 mils (carrier, adhesive) 5 mils (carrier) What is mil thickness?
Adhesion: 60 ounces per inch (to stainless steel test panel)
Tensile Strength: 18 pounds per inch (longitudinal)
Service/Operating Temperature: 40°F to 180°F
Elongation: 15%
Core: 3" diameter plastic

Note: Specifications are those given by manufacturers and are not tested for accuracy.

Roll Sizes/Widths

Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).

Please contact us to inquire about pricing for full-cut widths (e.g. a 6 inch roll cut to exactly 152mm instead of 144mm).

Alternative to...

This product can be used as an alternative to the following products(s):

3M #34201
Lamart #245L-R

PLEASE NOTE: "Alternative" to is NOT the same as equivalent to so please ensure the specifications listed are suitable for your application.

View related products we sell to this item.

LF-5R Special Order Sizes

ROLL SIZE	ITEM #	ROLLS PER CASE	QUANTITY ORDERING	PRICE PER ROLL	PRICE PER CASE
1/4 in. x 36 yds. Actual Size: 6.3mm wide Approximately 3 extra business days to ship	LF-5R/ 02536	24	Single Roll (1-11 Rolls) 1 Case (24 Rolls) 2+ Cases (48, 72, 96, ... Rolls)	1 case minimum $19.48 $19.15	--- $467.52 $459.60
3/8 in. x 36 yds. Actual Size: 9.5mm wide Approximately 3 extra business days to ship	LF-5R/ 03836	16	Single Roll (1-7 Rolls) 1 Case (16 Rolls) 2+ Cases (32, 48, 64, ... Rolls)	1 case minimum $28.57 $28.08	--- $457.12 $449.28
1/2 in. x 36 yds. Actual Size: 12.7mm wide Approximately 3 extra business days to ship	LF-5R/ 0536	12	Single Roll (1-5 Rolls) 1 Case (12 Rolls) 2+ Cases (24, 36, 48, ... Rolls)	1 case minimum $37.66 $37.02	--- $451.92 $444.24
3/4 in. x 36 yds. Actual Size: 19.0mm wide Approximately 3 extra business days to ship	LF-5R/ 07536	8	Single Roll (1-3 Rolls) 1 Case (8 Rolls) 2+ Cases (16, 24, 32, ... Rolls)	1 case minimum $55.84 $54.89	--- $446.72 $439.12
1 in. x 36 yds. Actual Size: 25.4mm wide Approximately 3 extra business days to ship	LF-5R/ 136	6	Single Roll (1-2 Rolls) 1 Case (6 Rolls) 2+ Cases (12, 18, 24, ... Rolls)	1 case minimum $74.03 $72.76	--- $444.18 $436.56
1-1/2 in. x 36 yds. Actual Size: 38.1mm wide Approximately 3 extra business days to ship	LF-5R/ 1536	4	Single Roll (1-1 Rolls) 1 Case (4 Rolls) 2+ Cases (8, 12, 16, ... Rolls)	1 case minimum $111.69 $109.78	--- $446.76 $439.12
2 in. x 36 yds. Actual Size: 50.8mm wide Approximately 3 extra business days to ship	LF-5R/ 236	3	Single Roll (1-1 Rolls) 1 Case (3 Rolls) 2+ Cases (6, 9, 12, ... Rolls)	1 case minimum $148.05 $145.52	--- $444.15 $436.56
3 in. x 36 yds. Actual Size: 76.2mm wide Approximately 3 extra business days to ship	LF-5R/ 336	2	Single Roll (1-1 Rolls) 1 Case (2 Rolls) 2+ Cases (4, 6, 8, ... Rolls)	1 case minimum $222.08 $218.28	--- $444.16 $436.56
4 in. x 36 yds. Actual Size: 101.6mm wide Approximately 3 extra business days to ship	LF-5R/ 436	2	Single Roll (1-1 Rolls) 1 Case (2 Rolls) 2+ Cases (4, 6, 8, ... Rolls)	1 case minimum $296.10 $291.04	--- $592.20 $582.08

Special Order Policies & Footnotes:

Special Order Policies

Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
Special order sizes often ship direct from our supplier so will not arrive together with stocked products.

Special Order Minimums

Minimum requirements apply because a size may be non-stock or if special setup is required to cut rolls to your desired custom width.
Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).

Shop Related Categories

Foil Tapes: Aluminum, Copper, Lead & Mastic Lead Foil Tape

Related Products (Similar Item Or Complementary Item)

JVCC LF-5A Lead Foil Tape [Acrylic Adhesive]

What Do Customers Ultimately Buy After Viewing This Item

100% instead buy

JVCC ACF-06 Acrylic Craft Felt Tape [1mm thick felt]

0% buy this

JVCC LF-5R Lead Foil Tape [Rubber Adhesive]

Customers Who Bought This Item Also Bought These At The Same Time

JVCC LF-5A Lead Foil Tape [Acrylic Adhesive]

JVCC CFL-5CA Copper Foil Tape [Conductive Adhesive]

Excell ET-LPD Table Top Label Protection Tape Dispenser

hot melt rubber (synthetic)

Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).

natural rubber

Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.

acrylic

Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.

silicone

Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.

zinc oxide

Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.

Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.

1 mil = 1/1000 of an inch

Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils

Shopping Cart Summary

VIEW CART - or - PROCEED TO CHECKOUT

Continue Shopping