Retailer of Tape, Glues/Adhesives & Dispensers

Pro Tapes Pro-Glow

Pro Tapes Pro-Glow Glow in the Dark Tape [10 Hour]

Print Page
1 Question & Answers
  • Quantity
    View Full Pricing Table
    View "Full Pricing Table" below for detailed pricing and additional sizes!
  • Color
    Luminescent Lime Green
  • Roll Size *
    Purchased Most Frequently: 1/2 in x 30 ft. (Luminescent Lime Green) | See Pricing Table below for additional options.
  • Price
    $ Price/photo will update once color & size have been chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

Pro Tapes Pro-Glow Glow in the Dark Tape is a phosphorescent vinyl film tape which glows in total darkness after exposure to artificial or natural light. The photoluminescent light source is designed to absorb energy from any nearby ambient light such as fluorescent lamps or sunlight. Once the source of extraneous light is removed Pro-Glow emits a light source of its own which is visible to the night-adjusted eye. When fully charged Pro-Glow provides luminance for up to 10 hours. There isn't a limit to the number of times this product can be recharged (also remains highly effective for use for up to 6 years). It will glow brightest for the first 15 to 30 minutes after charging has ceased, but will remain visible in a totally dark room to the night-adjusted eye; however, it would not compare its brightness to say a standard flashlight. In its uncharged state the tape has a whitish/yellow color and when glowing the tape has a luminescent lime green color. Recommended for interior applications only. Pro Glow is used to spike stages for the placement of scenery and to mark exits, light switches and panels in dark areas. The tape's flexible backing is conformable and easy to cut. Made in the U.S.

* Multiple cases may be shipped per package in order to minimize the charge for shipping.


Technical Information

Pro Tapes Pro-Glow Glow in the Dark Tape
  • Carrier/Backing: phosphorescent vinyl film
  • Adhesive: solvent-based acrylic   How are adhesives different?
  • Release Liner: poly coated 75lb yellow paper
  • Thickness: 10 mils (carrier, adhesive)   What is mil thickness?
  • Adhesion: 64 ounces per inch (to stainless steel test panel)
  • Service/Operating Temperature: -20°F to 200°F
  • Application Temperature: 50°F to 100°F
  • Core: 3" diameter neutral
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Alert Roll Sizes/Widths

Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).

Please contact us to inquire about pricing for full-cut widths (e.g. a 6 inch roll cut to exactly 152mm instead of 144mm).

Download Datasheets

Download Datasheets

The following downloads are available for this product:

Download Product Data Sheet
Alternative To

Alternative to...

This product can be used as an alternative to the following products(s):

  • Jessup #7520
PLEASE NOTE: "Alternative" to is NOT the same as equivalent to so please ensure the specifications listed are suitable for your application.
View related products we sell to this item.

Pro-Glow Standard sizes


1/2 in. x 30 ft.

Actual Size: 12mm x 30 ft.

PRO-GLOW/ 053024

Single Roll (1-23 Rolls)

1 - 4 Cases (24-119 Rolls)

5 - 9 Cases (120-239 Rolls)

10+ Cases (>= 240 Rolls)









3/4 in. x 30 ft.

Actual Size: 18mm x 30 ft.

PRO-GLOW/ 0753024

Single Roll (1-23 Rolls)

1 - 4 Cases (24-119 Rolls)

5 - 9 Cases (120-239 Rolls)

10+ Cases (>= 240 Rolls)









1 in. x 30 ft.

Actual Size: 24mm x 30 ft.

PRO-GLOW/ 13012

Single Roll (1-11 Rolls)

1 - 4 Cases (12-59 Rolls)

5 - 9 Cases (60-119 Rolls)

10+ Cases (>= 120 Rolls)









2 in. x 30 ft.

Actual Size: 48mm x 30 ft.

PRO-GLOW/ 2306

Single Roll (1-5 Rolls)

1 - 4 Cases (6-29 Rolls)

5 - 9 Cases (30-59 Rolls)

10+ Cases (>= 60 Rolls)









3 in. x 30 ft.

Actual Size: 72mm x 30 ft.

PRO-GLOW/ 3304

Single Roll (1-3 Rolls)

1 - 4 Cases (4-19 Rolls)

5 - 9 Cases (20-39 Rolls)

10+ Cases (>= 40 Rolls)









4 in. x 30 ft.

Actual Size: 96mm x 30 ft.

PRO-GLOW/ 4303

Single Roll (1-2 Rolls)

1 - 4 Cases (3-14 Rolls)

5 - 9 Cases (15-29 Rolls)

10+ Cases (>= 30 Rolls)









6 in. x 30 ft.

Actual Size: 144mm x 30 ft.

PRO-GLOW/ 6302

Single Roll (1 Roll)

1 - 4 Cases (2-9 Rolls)

5 - 9 Cases (10-19 Rolls)

10+ Cases (>= 20 Rolls)









Nominal Tape Widths vs Actual Widths

Nominal vs. Actual Widths Zoom In

Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:

  • 1" Nominal width = 15/16" (24mm) Actual width
  • 2" Nominal width = 1-7/8" (48mm) Actual width
  • 3" Nominal width = 2-13/16" (72mm) Actual width

Note that tape rolls are NOT guaranteed to be splice-free.

Custom Tape Widths
May be Available!

  • Need custom sized or "full-cut" width tapes? Many of our tapes come to our converter as full wide width "log rolls" (not pre-cut), and can be custom cut to widths not shown in the pricing table.
  • Contact us today for pricing and minimum requirements to order your desired tape in a custom width.
  • Please note that since this tape comes in "log roll" format most rolls ship on a plain white core (i.e. with no branding or text inside the core).

Question & Answers

[ viewing questions 1 through 1 of 1 total ]
Customer Jul 09, 2017
QUESTION: Is it flexible? Meaning can it be formed into a flat circle to go around a bicycle rim?
ANSWER: Yes, I cut notches into the tape and the notches held surprisingly well. 

User Reviews

[ viewing reviews 1 through 1 of 1 total ]
SAK Verified Buyer Jan 25, 2013
Fun product that wows!
Pro Tapes Pro-Glow Glow in the Dark Tape [10 Hour]
Used to enhance our youth groups "Tron" night activity!!!
Pro Tapes Pro-Glow Glow in the Dark Tape [10 Hour]
Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Shopping Cart Summary

Newsletter Signup

Sign up today to be notified of upcoming deals and exclusive offers!

Adhesive Tape Blog
Video Resource Library
How-To Resource Articles
See also
Electrical Tapes
Tapes for Scrapbooking