Oralite Agricultural Microprismatic Reflective Conspicuity Strips

Print Page

Ask a Question 
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
  • Size
    2 in. x 9 in. strip
    Purchased Most Frequently: 2 in. x 9 in. (Yellow)
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

Oralite Agricultural Microprismatic Reflective Conspicuity Strips are 2-inch x 9-inch pre-cut radius corner strips without any seamline. Oralite is the Oracal Group's new brand name for Reflexite. The red strips are from V82 10-year warranty material and the John Deere yellow strips are from V92 5-year warranty material. They provide unsurpassed nighttime visibility with Oralite's microprismatic technology. They're a tough weather-and solvent resistant product designed for rugged outdoor use on the sides and rear of heavy equipment, farm machinery, and on agricultural & industrial utility vehicles. Reflective Radius Corner Strips are thin, flexible and are impact resistant and retain photometric reflectivity performance after impact so they maintain safety after collision or years of wear. They also provide superior durability through power washing and extreme weather (they resist edge lift). They meet ANSI/ASAE S276.5 standards and meet the requirements of LS-300C solvent resistance, section 3.6.7.

Photometric Performance

Coefficient of Retroreflection (candelas/lux/square meters)
Observation AngleEntrance AngleYellowRed
Country of Origin: United States.
* Multiple cases may be shipped per package in order to minimize the charge for shipping.


Technical Information

Oralite Agricultural Microprismatic Reflective Conspicuity Strips
  • Standards Met: ANSI/ASAE S276.5; LS-300C section 3.6.7; complies with European RoHS directive 2002/95/EC
  • Carrier/Backing: enclosed lens retroreflective polyester film
  • Adhesive: acrylic   How are adhesives different?
  • Release Liner: paper
  • Thickness: 8 mils (carrier, adhesive)   What is mil thickness?
  • Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Download Datasheets

The following downloads are available for this product:

Download Agricultural Application RegulationsDownload V82 Technical BulletinDownload V92 Technical Bulletin

Agricultural Standard sizes


2 in. x 9 in. strip


Single Item (1-24 Items)

1 - 4 Cases (25-124 Items)

5 - 9 Cases (125-249 Items)

10+ Cases (>= 250 Items)


a 33% discount

a 34% discount

a 36% discount





Question & Answers

User Reviews

Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Continue Shopping
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles