FindTape Glow in the Dark Egress Hazard Marking Tape (GLW-HZ)

Print Page

Ask a Question 
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
    Alternating Luminescent Lime Green and Black
  • Size
    Purchased Most Frequently: 2 in. x 33 ft. (Alternating Luminescent Lime Green…
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

FindTape GLW-HZ Glow in the Dark Egress Hazard Tape is a cost-effective photoluminescent marking tape used to warn people of hazardous areas during the day or night. The angled, black/white chevron pattern is highly visible in the day to warn of dangerous areas, walkways, steps, and more. During low or no light periods (such as night or in the event of a power outage) the alternating chevron pattern will photoluminesce (a mild green color) in the white portion and alternate with the black.

GLW-HZ tape has a permanent self-adhesive base that sticks to most surfaces, can be recharged using natural or artificial light, and the non-radioactive photoluminescent powders have a long lifespan.

The glow hazard tape is 11.8 millicandelas per square meter at five minutes, and photoluminescence decreases to 4.6 millicandelas after 10 minutes. After 20 minutes they are 1.6 millicandelas but still clearly visible in a totally dark room to the night-adjusted eye. However, it would not compare in brightness to a standard flashlight.

Please note that if you apply this product onto a porous surface such as wood, concrete or stone, the manufacturer recommends using a surface primer prior to application to help create a stable substrate.

Product Applications

  • Warehouse
  • Office
  • Garage
  • Home
  • Doorways
  • Low Edges
  • Stairways


Technical Information

FindTape Glow in the Dark Egress Hazard Marking Tape (GLW-HZ)
  • Carrier/Backing: photoluminescent PVC
  • Adhesive: solvent acrylic   How are adhesives different?
  • Thickness: 15 mils (carrier, adhesive)   What is mil thickness?
  • Adhesion: 213 ounces per inch (to stainless steel test panel)
  • Tensile Strength: 8.8 pounds per inch (longitudinal)
  • Service/Operating Temperature: 23°F to 122°F
  • Elongation: 25%
  • Core: 3-inch diameter
  • Shelf Life: 12 months
  • Country of Origin: United Kingdom
Note: Specifications are those given by manufacturers and are not tested for accuracy.

GLW-HZ Standard sizes


1 in. x 33 ft.

GLW-HZ/ 133

UPC = 692764161099

Single Item (1-7 Items)

1 - 2 Cases (8-23 Items)

3 - 4 Cases (24-39 Items)

5+ Cases (>= 40 Items)


a 9% discount

a 10% discount

a 11% discount





2 in. x 33 ft.

GLW-HZ/ 233

UPC = 692764161105

Single Item (1-5 Items)

1 - 2 Cases (6-17 Items)

3 - 4 Cases (18-29 Items)

5+ Cases (>= 30 Items)


a 6% discount

a 7% discount

a 7% discount





Question & Answers

User Reviews

Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Continue Shopping
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles