Shurtape P-661 Glow in the Dark Gaffers Tape
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
ITEMS ON BACKORDER: *** orders can be placed for backordered items at any time
The following are expected in approximately 7 day(s):
Color/Size: LUMINESCENT LIME GREEN 1/2 in. x 10 yds., 3 in. x 10 yds., 4 in. x 10 yds.
When you need a reliable, glow-in-the-dark gaffers tape for safety marking and other applications, pick Shurtape P-661. This premium-grade gaffers tape features a high-quality adhesive and offers clean, residue-free removal, so it's perfect for temporary applications in the audio/visual, television, motion picture, photography, theater industries.
P-661 glow-in-the-dark tape is made with premium photoluminescent pigments for improved glow intensity and duration. Additionally, it's hand-tearable in both directions and is writable and printable thanks to its non-smearing surface. Shurtape P-661 Glow-in-the-Dark Gaffers Tape is also exceptionally conformable, so it's perfect for adhesion to irregular shapes and surfaces.
This residue-free glow-in-the-dark gaff tape is typically fully charged within 30 minutes after exposure to either artificial or natural light. It glows at its brightest for the first 15 to 30 minutes post-activation but will remain clearly visible in a totally dark room to the night-adjusted eye for hours. This product has a luminescent glow but would not compare in brightness to a standard flashlight.
- Safety marking in low-lit and dark spaces for stairs, exits, and more
- Temporary signage in windowless conditions
- Arts and crafts projects
Shurtape P-661 Glow in the Dark Gaffers Tape
- Adhesive: synthetic rubber How are adhesives different?
- Carrier/Backing: acrylic coated cloth with photo luminescent pigment
- Thickness: 12.5 mils (carrier, adhesive) What is mil thickness?
- Adhesion: 80 ounces per inch (to stainless steel test panel)
- Tensile Strength: 48 pounds per inch (longitudinal)
- Application Temperature: 45°F to 200°F
- Elongation: 5%
- Illumination Meter: 21.62 lux (after 10 min), 4 lux (after 60 min)
- Standards Met: ASTM E 2072
- Core: white 3" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
P-661 Standard sizes
|ROLL SIZE||ITEM #
||ROLLS PER CASE
||PRICE PER ROLL
||PRICE PER CASE
1/2 in. x 10 yds.
Single Roll (1-23 Rolls)
1 - 2 Cases (24-71 Rolls)
3 - 4 Cases (72-119 Rolls)
5+ Cases (>= 120 Rolls)
3/4 in. x 10 yds.
Single Roll (1-15 Rolls)
1 - 2 Cases (16-47 Rolls)
3 - 4 Cases (48-79 Rolls)
5+ Cases (>= 80 Rolls)
1 in. x 10 yds.
Single Roll (1-11 Rolls)
1 - 2 Cases (12-35 Rolls)
3 - 4 Cases (36-59 Rolls)
5+ Cases (>= 60 Rolls)
2 in. x 10 yds.
Single Roll (1-5 Rolls)
1 - 2 Cases (6-17 Rolls)
3 - 4 Cases (18-29 Rolls)
5+ Cases (>= 30 Rolls)
3 in. x 10 yds.
Single Roll (1-3 Rolls)
1 - 2 Cases (4-11 Rolls)
3 - 4 Cases (12-19 Rolls)
5+ Cases (>= 20 Rolls)
4 in. x 10 yds.
Single Roll (1-2 Rolls)
1 - 2 Cases (3-8 Rolls)
3 - 4 Cases (9-14 Rolls)
5+ Cases (>= 15 Rolls)
Nominal Tape Widths vs Actual Widths
5% narrower than the NOMINAL width shown in inches. Examples:
Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally
- 1" Nominal width = 15/16" (24mm) Actual width
- 2" Nominal width = 1-7/8" (48mm) Actual width
- 3" Nominal width = 2-13/16" (72mm) Actual width
Note that tape rolls are NOT guaranteed to be splice-free.
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils