ISC Helicopter-OG-HD Surface Guard Tape [14 mil Heavy Duty Outdoor Grade]
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
ISC has approved their 14 mil laminated to a 70# release liner for temporary production of 60 foot rolls. The standard liner is 94#. The 94# release liner is approx. 6 mils thick and 70# liner is approx. 4.5 mils thick. The level of release of both liners is almost identical. The adhesive properties of the tape will not be affected. The overall outside diameter of a roll of 14mil 60 foot roll will be reduced because of this for the duration of the lot using the new liner. The length of the tape will still be the same at 60 ft.
Product Description
ISC Helicopter-OG-HD Heavy Duty Surface Guard Tape is conformable and extremely strong 14-mil outdoor grade polyurethane tape. Also known as helicopter blade/leading edge wing tape, the thick film backing provides exceptional protection from tearing, punctures, erosion and abrasion. ISC's surface guard tape also protects against extreme temperatures, ultraviolet light and automotive solvents. The tape is clear (transparent) and comes on a white paper, 92-pound polycoated release liner.
Helicopter-OG-HD Surface Guard Tape Features and Benefits
- Won't yellow over time
- Exceptional paint protection
- Protects against UV light, hot and cold temperatures, solvents
- Resists erosion, abrasion, tears and punctures
- Made from polyurethane (not vinyl or PVC); stands up to abuse
- Extremely rugged; must be cut with scissors or razor knife
- Durable, easy-release liner
- Doesn't require solvent or heat to activate
Product Applications
- Body panels on race cars
- Bicycle frames
- Skis
- Kayaks
- Surfboards
- Ground effects
- Bumpers
- Tailgates
- Top fuel wings
- Trailer walls
- Spring car wings
- Roll cages
- Headlights
- Wheel wells
- Truck beds
- Toolboxes
- Hood and door edges
- Protects bar code labels in extreme conditions
- Rail protection on stand-up paddle boards (SUPs)
- Any painted or unpainted surface that is prone to weathering, chipping or scratching
Made in the U.S.
* Multiple cases may be shipped per package in order to minimize the charge for shipping.
Technical Information
ISC Helicopter-OG-HD Surface Guard Tape
- Adhesive: acrylic How are adhesives different?
- Carrier/Backing: polyurethane film
- Release Liner: 92 lb. polycoated white paper
- Thickness: 19.2 mils (carrier, adhesive, liner) 14.5 mils (carrier, adhesive) 12 mils (carrier) 4.7 mils (liner) What is mil thickness?
- Adhesion: 110 ounces per inch (to stainless steel test panel)
- Tensile Strength: 80 pounds per inch (longitudinal)
- Service/Operating Temperature: -40°F to 275°F
- Application Temperature: 50°F (minimum)
- Elongation: 500%
- Core: 3" diameter
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Roll Sizes/Widths
Please note that tape rolls are NOT guaranteed to be splice-free. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
Alternative to...
This product can be used as an alternative to the following products(s):
PLEASE NOTE: "Alternative" to is NOT the same as equivalent to so please ensure the specifications listed are suitable for your application.
Helicopter-OG-HD Standard sizes
| ROLL SIZE | ITEM # |
ROLLS PER CASE |
QUANTITY ORDERING |
PRICE PER ROLL |
PRICE PER CASE |
|---|
1 in. x 30 ft. *30-foot roll | HELICOPTER-OG-HD/ 130 | 4 | Single Roll (1-3 Rolls) 1 - 4 Cases (4-19 Rolls) 5 - 9 Cases (20-39 Rolls) 10+ Cases (>= 40 Rolls) | | |
1 in. x 60 ft. | HELICOPTER-OG-HD/ 160 | 4 | Single Roll (1-3 Rolls) 1 - 4 Cases (4-19 Rolls) 5 - 9 Cases (20-39 Rolls) 10+ Cases (>= 40 Rolls) | | |
2 in. x 30 ft. *30-foot roll | HELICOPTER-OG-HD/ 230 | 4 | Single Roll (1-3 Rolls) 1 - 4 Cases (4-19 Rolls) 5 - 9 Cases (20-39 Rolls) 10+ Cases (>= 40 Rolls) | | |
2 in. x 60 ft. | HELICOPTER-OG-HD/ 260 | 4 | Single Roll (1-3 Rolls) 1 - 4 Cases (4-19 Rolls) 5 - 9 Cases (20-39 Rolls) 10+ Cases (>= 40 Rolls) | | |
3 in. x 30 ft. *30-foot roll | HELICOPTER-OG-HD/ 330 | 4 | Single Roll (1-3 Rolls) 1 - 4 Cases (4-19 Rolls) 5 - 9 Cases (20-39 Rolls) 10+ Cases (>= 40 Rolls) | | |
3 in. x 60 ft. | HELICOPTER-OG-HD/ 360 | 4 | Single Roll (1-3 Rolls) 1 - 4 Cases (4-19 Rolls) 5 - 9 Cases (20-39 Rolls) 10+ Cases (>= 40 Rolls) | $117.90 $108.30 $104.74 $102.08 | |
4 in. x 30 ft. *30-foot roll | HELICOPTER-OG-HD/ 430 | 4 | Single Roll (1-3 Rolls) 1 - 4 Cases (4-19 Rolls) 5 - 9 Cases (20-39 Rolls) 10+ Cases (>= 40 Rolls) | | |
4 in. x 60 ft. | HELICOPTER-OG-HD/ 460 | 4 | Single Roll (1-3 Rolls) 1 - 4 Cases (4-19 Rolls) 5 - 9 Cases (20-39 Rolls) 10+ Cases (>= 40 Rolls) | $156.96 $144.40 $139.67 $136.11 | |
6 in. x 30 ft. *30-foot roll | HELICOPTER-OG-HD/ 630 | 4 | Single Roll (1-3 Rolls) 1 - 4 Cases (4-19 Rolls) 5 - 9 Cases (20-39 Rolls) 10+ Cases (>= 40 Rolls) | $117.93 $108.32 $104.77 $102.10 | |
6 in. x 60 ft. | HELICOPTER-OG-HD/ 660 | 4 | Single Roll (1-3 Rolls) 1 - 4 Cases (4-19 Rolls) 5 - 9 Cases (20-39 Rolls) 10+ Cases (>= 40 Rolls) | $235.08 $216.60 $209.50 $204.18 | |
8 in. x 30 ft. *30-foot roll | HELICOPTER-OG-HD/ 830 | 4 | Single Roll (1-3 Rolls) 1 - 4 Cases (4-19 Rolls) 5 - 9 Cases (20-39 Rolls) 10+ Cases (>= 40 Rolls) | $156.60 $144.07 $139.35 $135.81 | |
8 in. x 60 ft. | HELICOPTER-OG-HD/ 860 | 4 | Single Roll (1-3 Rolls) 1 - 4 Cases (4-19 Rolls) 5 - 9 Cases (20-39 Rolls) 10+ Cases (>= 40 Rolls) | $312.45 $288.11 $278.67 $271.59 | N/A $1152.44 $1114.68 $1086.36 |
Nominal Tape Widths vs Actual Widths
Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:
- 1" Nominal width = 15/16" (24mm) Actual width
- 2" Nominal width = 1-7/8" (48mm) Actual width
- 3" Nominal width = 2-13/16" (72mm) Actual width
Note that tape rolls are NOT guaranteed to be splice-free.
Helicopter-OG-HD Special Order Sizes
| ROLL SIZE | ITEM # |
ROLLS PER CASE |
QUANTITY ORDERING |
PRICE PER ROLL |
PRICE PER CASE |
|---|
2 in. x 6 ft. *6-foot strip Approximately 3 extra business days to ship | HELICOPTER-OG-HD/ 2-6-2 | 10 | Single Roll (1-9 Rolls) 1 - 4 Cases (10, 20, 30, ... Rolls) 5 - 9 Cases (50, 60, 70, ... Rolls) 10+ Cases (100, 110, 120, ... Rolls) | 1 case minimum $10.98 $10.78 $10.45 | |
Special Order Policies & Footnotes:
Special Order Policies
- Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
Special Order Minimums
- Minimum requirements apply because a size may be non-stock.
- Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils