This is overstock material and inventory is limited.
JVCC Dry-Erase Office Tape [Silver]
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
JVCC Dry-Erase Tape is a silver-colored metallized (aluminized) polyester mylar film which can be written on with a wet or dry erase marker. A great tape for crafting, decorating and labeling anywhere you can place tape and need whiteboard functionality. Country of Origin: United States.
* Multiple cases may be shipped per package in order to minimize the charge for shipping.
JVCC Dry-Erase Office Tape
- Carrier/Backing: metalized polyester film
- Adhesive: acrylic How are adhesives different?
- Release Liner: white paper
- Thickness: 3.4 mils (carrier, adhesive) What is mil thickness?
- Shelf Life: 12 months
- Vehicle: Plaster
- Core: 3" diameter
- Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Dry Erase Standard sizes
|ITEM SIZE||ITEM #
||ITEMS PER CASE
||PRICE PER ITEM
||PRICE PER CASE
1.88 in. x 144 in.
|DRY ERASE/ 188144|
UPC = 667753001847
Single Item (1-11 Items)
½ Case (12-23 Items)
1 - 3 Cases (24-95 Items)
4+ Cases (>= 96 Items)
Question & Answers
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils