JVCC Laminated Premium Hazard Warning Tape [9 mils thick] (HZ-8LP)

Print Page
Ask a Question
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
    Black with Yellow stripes
  • Size
    Purchased Most Frequently: 2 in. x 18 yds. (Black with Yellow stripes)
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

JVCC HZ-8LP Laminated Premium Hazard Warning Tape is a PVC vinyl tape with a 2 mil over-lamination. The tape is scuff resistant and it resists oil, grease, solvents, and moisture. JVCC HZ-8LP is used for marking fire equipment, exits, hazardous areas, floors, and first aid points. It also meets government specification A-A-1689B Type II.

Our converter can also special order this tape with red/white or with black/white stripes (or in a longer 36-yard length) so please use our Contact Us page to inquire about minimum requirements and pricing.

Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.

 

Technical Information

JVCC Laminated Premium Hazard Warning Tape (HZ-8LP)
  • Standards Met: CID A-A-1689B Type II
  • Carrier/Backing: polyvinyl chloride (PVC) film
  • Adhesive: rubber   How are adhesives different?
  • Thickness: 9 mils (carrier, adhesive)   What is mil thickness?
  • Adhesion: 22 ounces per inch (to stainless steel test panel)
  • Tensile Strength: 33 pounds per inch (longitudinal)
  • Elongation: 200%
  • Core: 3" diameter neutral
  • Adhesive Base: Accelerator Hardener
  • Adhesive Base: Resin Epoxy Resin
  • Country of Origin: Taiwan, R.O.C.
Note: Specifications are those given by manufacturers and are not tested for accuracy.

HZ-8LP Standard sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

1 in. x 18 yds.

Actual Size: 24mm x 16.5m

HZ-8LP/ 118

UPC = 695087748671
48

Single Item (1-47 Items)

1 - 5 Cases (48-287 Items)

6 - 11 Cases (288-575 Items)

12+ Cases (>= 576 Items)

$5.33

$3.83
a 28% discount

$3.74
a 30% discount

$3.70
a 31% discount

N/A

$183.84

$179.52

$177.60

2 in. x 18 yds.

Actual Size: 48mm x 16.5m

HZ-8LP/ 218

UPC = 695087748688
24

Single Item (1-23 Items)

1 - 5 Cases (24-143 Items)

6 - 11 Cases (144-287 Items)

12+ Cases (>= 288 Items)

$9.51

$7.59
a 20% discount

$7.41
a 22% discount

$7.28
a 24% discount

N/A

$182.16

$177.84

$174.72

3 in. x 18 yds.

Actual Size: 72mm x 16.5m

HZ-8LP/ 318

UPC = 695087748695
16

Single Item (1-15 Items)

1 - 5 Cases (16-95 Items)

6 - 11 Cases (96-191 Items)

12+ Cases (>= 192 Items)

$13.68

$11.32
a 17% discount

$11.07
a 19% discount

$10.87
a 21% discount

N/A

$181.12

$177.12

$173.92

4 in. x 18 yds.

Actual Size: 96mm x 16.5m

HZ-8LP/ 418

UPC = 695087748701
12

Single Item (1-11 Items)

1 - 5 Cases (12-71 Items)

6 - 11 Cases (72-143 Items)

12+ Cases (>= 144 Items)

$16.25

$13.68
a 16% discount

$13.34
a 18% discount

$13.10
a 19% discount

N/A

$164.16

$160.08

$157.20

6 in. x 18 yds.

Actual Size: 144mm x 16.5m

HZ-8LP/ 618

UPC = 695087748718
8

Single Item (1-7 Items)

1 - 5 Cases (8-47 Items)

6 - 11 Cases (48-95 Items)

12+ Cases (>= 96 Items)

$23.63

$20.29
a 14% discount

$19.77
a 16% discount

$19.44
a 18% discount

N/A

$162.32

$158.16

$155.52

8 in. x 18 yds.

Actual Size: 192mm x 16.5m

HZ-8LP/ 8186

Single Item (1-5 Items)

1 - 5 Cases (6-35 Items)

6 - 11 Cases (36-71 Items)

12+ Cases (>= 72 Items)

$31.44

$27.26
a 13% discount

$26.61
a 15% discount

$26.17
a 17% discount

N/A

$163.56

$159.66

$157.02

Question & Answers

User Reviews

[ viewing reviews 1 through 1 of 1 total ]
B
Bubba Verified Buyer Dec 24, 2012
Very Nice High Gloss Shine
JVCC HZ-8LP Laminated Premium Hazard Warning Tape [9 mils thick]
I use it to mark areas that present as a fall, trip or potential safety risk. such as steps, loading docks, electrical cords, low ceiling beams, low overhead pipes and such things. It has only a small amount of shrinkage when applied and has a strong adhesive. Holds tight even when exposed to the weather. It has a very nice high gloss finish. It costs more but well worth the extra few cents.
Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
EMAIL/SMS SIGN-UP
+1
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles