- JVCC DC-4109RS Double Coated Film Tape (Acrylic Adhesive)
JVCC DC-4109RS Double Coated Film Tape is a polyester film substrate coated on both sides with a modified solvent-free water-based acrylic adhesive (the adhesive has a one hour dwell time). Perfect for splicing of various materials such as papers, plastics, films and foils. Can be used for mounting nameplates, keyboard assembly, and laminating dissimilar metals.
JVCC DC 4109RS Double-Coated Film Tape features:
Comes on a gold siliconized paper liner.
Superior moisture resistance in high humidity.
Excellent low and high temperature performance.
Temperature Resistance up to 392DF short term.
- JVCC DC-4420LB Double Coated PVC Tape (Aggressive)
JVCC DC-4420LB Double Coated PVC Tape is a PVC film coated on both sides with a water based acrylic adhesive. On a gold siliconized paper liner. The adhesive system of this two-sided tape is very aggressive and will bond to nearly all materials (even on difficult surfaces like foams, PE and PP films). Has excellent temperature, UV, aging, and water vapor resistance. Used for bonding rubber, plastic, metal, and wood substrates. Also for permanent mounting of nameplates, hemming vinyl banners and decorative trim on appliances and furniture. Has a one hour dwell before adhesion reaches maximum.
- JVCC V-36 Colored Vinyl Tape
JVCC V-36 Colored Vinyl Tape is a durable tape used for marking floors/lanes, color coding, decorating, striping on vehicles and boats, and to identify restricted or hazardous areas. Used extensively on school gym floors all kinds. Helps with safety coding to meet OSHA requirements. Can also be used for masking of hard chrome plating and anodizing, harness and pipe wrapping, and duct and joint sealing. JVCC V-36 Vinyl Tape is also known as Dance Floor Tape, Marley Tape, or Splice Tape.
Features include:
"Write-on" capability.
Highly conformable and good abrasion/impact resistance.
Provides vapor/moisture barrier.
Resistant to aging, sun, water, fungus/bacteria, acids/chemicals.
No corrosion to copper, brass, steel, or aluminum.
- JVCC V-36P Premium Colored Vinyl Tape
JVCC V-36P Premium Colored Vinyl Tape is a superior quality vinyl tape used for color coding; lane marking and safety coding to meet OSHA requirements; decorating and striping on vehicles, boats and sporting equipment. Also to identify restricted or hazardous areas; masking for hard chrome plating and anodizing; harness and pipe wrapping; and duct and joint sealing. JVCC V-36P Vinyl Tape is also known as Dance Floor Tape, Marley Tape, or Splice Tape and it is 1 mil thicker and has 25% more adhesion than regular JVCC V-36 Vinyl Tape.
JVCC V-36P Premium Vinyl Tape features include:
Latex-free.
Long shelf life.
"Write-on" capability.
Provides very effective vapor/moisture barrier.
Highly conformable and good abrasion/impact/rupture resistance.
Resistant to aging, sun, water, fungus/bacteria, oil, acids/alkalies/corrosive chemicals.
No corrosion to copper, brass, steel, or aluminum.
- JVCC PRE-MASK-1 Premask Application Tape
JVCC PRE-MASK-1 Premask Application Tape is a 5.3 mil natural color transfer premask. Translucent saturated
paper with a rubber resin based pressure-sensitive adhesive. It is fully compatible for plotter cuts and thermal die cuts of all size die cuts and vinyl lettering. Pre Mask is used to transfer cut vinyl graphics from their release liner to another surface. The tape protects the graphics from scratches during installation and allows quicker application since the cut graphics will not move during installation. Has medium tack which is ideal for most transfer applications and it has good resistance to abrasion and moisture.
- Scapa 136 Polyethylene Film Tape
Scapa Polyflex 136 Polyethylene Film Tape is a heavy-duty polyethylene backed, single coated tape with a synthetic rubber adhesive. It is used for convention center floor marking, surface protection, wire identification, seaming/splicing of polyethylene sheeting and general purpose holding. It is also used in the boating and RV industry for patching & repairing of poly sheeting. Unlike a vinyl floor marking tape a polyethylene tape like 136 will not stretch or break if laying across a large area like a convention center floor. Scapa Polyflex 136 features include a tacky adhesive which bonds well to most surfaces over a wide temperature range; excellent low-temperature bonding; product is very conformable; it maintains a watertight seal in most weather conditions; good tear characteristics; and a low residue adhesive. Scapa 136 is not opaque, but is semi-transparent or translucent.
- FindTape DCCF-TP Double Coated Clear Film Tape Test Pack
We currently stock a variety of clear film double-sided tapes including ones on carriers such as polyester, polypropylene and PVC film. You can also choose from tape coated with rubber or acrylic adhesive. In addition some tapes have differential adhesion which allows one side to be more easily removed than the other permanent side.
And that is why we are offering our Double Coated Clear Film Tape Test Pack which will allow you to test 8 different varieties of double-sided clear film tape at an affordable price. We've also labeled each roll with the product number for easy reference.
When your test pack is shipped your packing slip will also include a unique access code which will enable you to review the 8 tapes you received in reference to how well they performed for your specific application. The purpose of the unique code is to ensure someone has tried all of the tapes recently before rating them. Once we receive in some reviews you will be able to view them here.
The pack includes a 4 yard roll of 1" clear for the following two-sided tapes:
JVCC DC-4109RS (polyester / acrylic adhesive)
JVCC DC-4199CS (polyester / acrylic adhesive)
JVCC DC-1503 (polypropylene / rubber adhesive)
JVCC DC-1114 (polyester / rubber adhesive)
JVCC DC-4420LB (PVC / acrylic adhesive)
JVCC DC-4110R/P (polyester / differential acrylic adhesive)
JVCC DC-1109R/P (polyester / differential rubber adhesive)
Scapa S305 (polyester / differential acrylic+rubber adhesive)
- JVCC OPP-22C Mid Grade Colored Packaging Tape
JVCC OPP-22C Mid Grade Colored Packaging Tape is a 30 micron polypropylene film packaging tape with a solvent-based acrylic adhesive. Used for carton sealing, color coding, splicing and identification applications. Available in 7 bright colors. The color on the tape is translucent so for the lighter colors you would be able to read writing underneath the tape.
- JVCC GLW Glow in the Dark Tape
JVCC GLW Glow in the Dark Tape is a premium flexible polyester laminated photoluminescent film tape with a permanent adhesive on one side. The photoluminescent pigments absorb and store energy from normal, ambient light. In sudden darkness the tape is immediately visible. The tape provides a non-electric safety marking system that easily and inexpensively affixes to walls, handrails, columns, around door frames, and along stairways and baseboards (provides visibility during an emergency). It is wound on a liner for easy handling. Also used for identification of critical equipment controls, exit and directional signage (especially for escape routes and stairways), light switch covers, labels, decals, novelties, sporting goods, trims and special effects. Used in hotels, hospitals, schools, public facilities, office buildings and manufacturing plants.
JVCC Glow in the Dark Tape is fully charged within 30 minutes after exposure to either artificial or natural light and glows brightest the first 15 to 30 minutes after activation has ceased, but will remain clearly visible in a totally dark room to the night-adjusted eye for up to 6 hours (to the night-adjusted eye it is visible, but it would not compare it brightness to say a standard flashlight). It also recharges. The tape has excellent UV stability and does not show significant degradation when used outdoors. The luminescent system used is non-radioactive and non-toxic. The tape is offset, screen, flexo, and thermo transfer printable. Adhesive has a 24 hour dwell time.
Note: 6 foot glow strips are shipped in rolled format (typically 10 glow strips will be rolled together in a bag).
- PrimeTac MS-EH Mini Stretch Extended Handle Stretch Film
PrimeTac Mini Stretch Extended Handle Stretch Film is a 5-inch wide hand film wound on 1-inch cores with a 4-3/4 inch application handle (a disposable handle is built into each roll). The film clings to itself so unlike adhesive tape there is no residue left when it is removed. Rolls are lightweight. PrimeTac Mini Stretch is used for palletizing, wrapping, and bundling of boxes, furniture and carpeting. Applications include distribution; moving & storage; and it is great for combining items for freight consolidation.
- JVCC OPP-20C Economy Grade Colored Packaging Tape
JVCC OPP-20C Economy Grade Colored Packaging Tape is a 28 micron polypropylene film packaging tape with a water-based acrylic adhesive. Good for carton sealing, color coding and identification applications. The color on the tape is translucent so for the lighter colors you would be able to read writing underneath the tape.
- Patco 5560 Removable Protective Film Tape
Patco 5560 Removable Protective Film Tape is a clean removal tape which combines a durable and conformable polyethylene film backing with a moderate tack, low adhesion acrylic adhesive which will not leave residue or damage most surfaces. it is used for general protective masking applications on plastics, glass, and metal that require temporary surface protection through assembly or shipping. Patco 5560 is highly conformable; abrasion, moisture and solvent resistant; and removes cleanly and easily.
- JVCC BOOK-20CC Crystal Clear Book Repair Tape
JVCC BOOK-20CC Crystal Clear Book Repair Tape is an ultra clear polypropylene film tape with a non-yellowing solvent-based acrylic adhesive. It is used for book repair, prescription, label protection and lamination. JVCC BOOK-20CC is also UV resistant.
- Polyken 824 Shrink Wrap Tape (Polyethylene Film)
Polyken 824 Shrink Wrap Tape is also known as hull preservation tape and is used for taping edges of shrink wrap to a boat's hull. It has a polyethylene film and rubber based adhesive. UV protected for prolonged expose to sunlight. Polyken 824's specially-designed adhesive eliminates residue even after extended periods of exposure. It is also conformable so it adheres to rough surfaces and is also easy to unwind. Shrink Wrap Tape is used to seam shrink wrap film sheeting together; patch holes in shrink wrap; secure the wrap; and to hold doors in place. It is also used for stucco & plaster masking and other outdoor masking applications where UV resistance is required. Our distributor gets this made specially from Covalence Adhesives in white and with serrated/pinked edges for easy tearing - no cutting is needed.
- JVCC PES-32G Polyester Film Packaging Tape
JVCC PES-32G Polyester Film Packaging Tape is a heavy-duty polyester film packaging tape used to meet the highest of quality & performance requirements. It is used for packaging, sealing, and splicing. This packaging tape features extremely aggressive hot melt rubber based adhesive that insures instant holding power and provides a quick reliable seal when used for strip closure of regular slotted containers, overlap sealing, and fiber drum sealing.
Our converter currently has some overstock of 4 inch clear so once the overstock inventory runs out the price will go back to its regular pricing.
- JVCC DC-4199CS Double Coated Film Tape (Acrylic Adhesive)
JVCC DC-4199CS Double Coated Film Tape is a polyester film tape coated on both sides with an extremely quick stick, high peel and high shear strength, solvent free water-based pure acrylic adhesive. It has superior moisture
resistance in high humidity. JVCC DC-4199CS is used for high speed flying splice of paper, corrugated paper, plastics, films, foils, etc.; mounting nameplates and keyboard
assembly; and laminating dissimilar metals. Comes on a white siliconized paper release liner.
- ISC Helicopter-OG Surface Guard Tape (Outdoor Grade)
ISC Helicopter-OG Surface Guard Tape (Outdoor Grade) is an extremely tough conformable polyurethane tape which was formerly referred to as helicopter/leading edge tape. It provides excellent paint protection from punctures, tearing, abrasion and erosion and is available in an indoor grade or an outdoor grade. Indoor grade can be used anywhere it will not be directly exposed to ultra violet light (the sun). If exposed to sun
light, it may yellow over time. Outdoor grade provides excellent protection against ultra violet light, temperature extremes and automotive solvents. Outdoor grade will not yellow over time.
Be sure to take note that ISC Surface Guard Tape is made of Polyurethane material not PVC or Vinyl. These other types cannot, and will not, take the abuse that Polyurethane will.
Applications for the surface protection tape are endless and include: bicycle frames, body panels on race cars, ground effects, top fuel wings, bumpers, tailgates, trailer walls, Sprint car wings, roll cages, toolboxes, headlights, wheel wells, truck beds, and door and hood edges. Also used to protect bar code labels under extreme conditions like at ski resorts. Anywhere there is a surface, unpainted or painted, that is prone to scratching, chipping or weathering, ISC's Surface Guard Tape can do the job.
Super tough film requires razor knife or scissors for cutting.
Supplied on 92 lb. easy release polycoated liner.
Requires no heat or solvent to activate.
12 ft. (4 yd.) and 30 ft. (10 yd.) rolls are 8 mils thick and 60 ft. (20 yd.) rolls are 14 mils thick.
* Items marked as retail package come in a retail blister pack with hanger holes (currently only the 12 ft. length rolls come in a retail package).
This product was mentioned in the October 2008 issue of Motorcycle Consumer News (page 48 Product Report).
- Shurtape PP-803 Ultra Clear to the Core Packaging Tape (Permacel J-LAR 910)
Shurtape PP-803 Ultra Clear to the Core Tape is an ultra clear, premium label protection and packaging tape. It is used for label protection; carton sealing in a broad temperature range; and over-lamination for instructions, drawings, etc. Shurtape PP803 features a high tack adhesive; excellent holding power; and a backing which is crystal clear (no streaks, dust or other contaminants). This is Shurtape's replacement product for the old Permacel J-LAR 910.
- Shurtape PE-444 Stucco Masking Film Tape (UV resistant)
Shurtape PE-444 Stucco Masking Film Tape is a UV resistant polyethylene film tape used to mask surfaces during stucco application and painting. Shurtape PE 644 has a special synthetic high-tack, residue free, adhesive which provides a watertight seal in severe environments and weather conditions. Typical applications include masking window and door frames during stucco application as well as masking wood, metal, vinyl, and tile during painting. Also used for greenhouse repair.
- Patco 5068 Greenhouse Repair Tape
Patco 5068 Greenhouse Repair Tape is a short-term economy-grade greenhouse patch, seal & repair tape. Used for general purpose sealing, splicing and seaming as well as surface protection and temporary hold-down applications. Patco 5068 Greenhouse Tape is conformable to irregular surfaces, performs well over a wide temperature range, is optically clear & hand-tearable; will not crack or crease at low temperatures, has an easy unwind and provides an excellent moisture barrier. This tape is not UV stabilized.
- JVCC LITHO-1 Lithographer's Tape
JVCC LITHO-1 Lithographer's Tape is a ruby red E-PVC film tape with a solvent-based natural rubber adhesive. It is used for pre-press stripping, splicing, edging and opaquing applications on film materials. Used in the graphic arts, printed circuit board and paper industries for blocking light from sensitive graphic art and printing materials. Lithographers Tape will not curl or damage negatives upon removal.
Features of JVCC Lithographer's Tape include:
Conformable.
Absorbs UV and short wave light.
Translucent.
Easily repositionable.
- Berry Plastics 771 Surveyors Flagging Tape
Berry Plastics 771 Surveyors Flagging Tape is a NON-ADHESIVE tape used for surveying, trail marking and in other industrial applications. It is brightly colored for easy identification; available in both day-glo orange and day-glo pink. Berry Plastics 771 Surveyors Tape is easy to use - just tie and untie. Reusable.
- JVCC PTFE-2HD Skived Teflon Tape (2 mil, High Density)
JVCC PTFE-2HD Skived Teflon Tape is a 2 mil high density tensilized pure skived TeflonTM (PTFE film) tape with a high temperature silicone adhesive. It comes self-wound without a liner. Used in electrical applications such as harness / coil wraps & separators, transformers and slot liners where good insulation and heat resistance are required. Also used in mechanical applications such as heat sealing bars & jaws, labeling machine pressure pads, chute liners, anti-friction devices, bearings, forming dies, aircraft mold release & guide rails where high temperature, maximum slip and lubricity are required. JVCC PTFE-2HD provides higher tensile strength, lower elongation and higher dielectric strength than regular skived film. It is primarily used for electrical applications listed above & for roll protection in flat die extrusion.
- JVCC CELLO-1 Cellophane Tape
JVCC CELLO-1 Cellophane Tape is a pure cellulose transparent tape which is eco-friendly since it is biodegradable. Uses include carton sealing, repairing papers, gift wrapping and other craft projects. The clear tape is hand-tearable and is often used in the electronics industry since it is also static-free.
- JVCC DC-WPVC98 Double Coated White PVC Tape (Agressive)
JVCC DC-WPVC98 Double Coated PVC Tape is a white PVC film coated on both sides with a modified acrylic adhesive, solvent free, based on aqueous dispensions. It's adhesive strength builds up with time (1 hour swell time) and it is very moisture and temperature resistance. This adhesive has good tack and adheres extremely well to PE- and PP- films as well as to rough surfaces such as chipboards. JVCC DC-WPVC98 is also APEO/APE Free.
- JVCC OPP-34CC Premium Grade Crystal Clear Packaging Tape
JVCC OPP-34CC Crystal Clear Carton Sealing Tape is a 3.6 mil biaxially oriented polypropylene film tape coated with a solvent based acrylic adhesive. See-through "CRYSTAL CLEAR" imprinted on 3" core. Crystal clear tape is non-yellowing and UV resistant with a long shelf life. Used for carton sealing. May also be used for moderate demand lamination and in cold temperature applications.
- Nashua 680004 Heavy Duty Tarp Tape
Nashua Heavy Duty Tarp Tape is a black polyethylene film tape used for sealing and seaming of heavy-weight poly tarps. It has a rubber-based adhesive suitable for 6 to 8 months of outdoor exposure (it is designed for extended outdoor exposure). It is UV resistant and has a tough polyethylene backing. Nashua Tarp Tape has the tensile strength of duct tape without the irregular adhesive surface. It is highly conformable with smooth adhesive to provide superior contact to difficult surfaces.
- JVCC VEPT-65 Vinyl Electroplating Tape
JVCC VEPT-65 Vinyl Electroplating Tape is a SPVC masking tape designed for use with PCB terminal zone contacts to prevent penetration of chemicals during the plating process and as a protection tape for shot peening applications. The tape is extremely conformable, durable and highly resistant to oil, acid,
alkalines and corrosive chemicals. It also has excellent adhesion to metals and plastics. Meets government specification H-H-T- 0025, AMD 2.
- JVCC MPF-01 Metalized Polyester Film Tape (Reflective)
JVCC MPF-01 Metalized Polyester Film Tape is a metallized polyester mylar film with a brilliant, vibrant mirror-like finish; coated with an aggressive long lasting acrylic adhesive system. Tapes have excellent chemical and thermal stability. Silver can be qualified to meet Federal Specification #L-T-100B, Type II.
Metalized Polyester Film Tape is used for reflective shielding; industrial & graphic art applications; decorative trim, automotive trim, nameplates, electric appliances an and advertising displays. It is also suitable for micro film splicing and can be used in photo sensing applications to detect spices and to facilitate roll changeovers (should test first).
Image does not show a full 72 yard roll.
- Sigma Classic Blown Stretch Film
Sigma Classic Blown Stretch Film is a premium grade, blown hand film with unrivaled load-handling force and unparalleled puncture resistance. The stretch and toughness of blown film ensures enhanced protection for regular loads and extra protection for hard-to-hold "C" loads. Classic Blown offers toughness, strength and superior tear resistance. Sigma Stretch Film is used for palletizing, wrapping, and bundling of boxes, furniture and carpeting. Applications include brick and block, warehouses, irregular loads, transportation industry, food distribution, bagged products, boxed products. Made in the U.S.A.
- 3M Scotch 665 Removable Repositionable Double Sided Tape (Linerless)
3M 665 Removable Repositionable Double Sided Tape (Linerless) is a self-wound transparent UPVC film coated with a reclosable adhesive on both sides. The linerless feature on 3M 665 can help simplify manual or automatic dispensing (no special liner removal equipment is required). The tape has medium solvent resistance and excellent UV resistance.
Typical applications for 3M 665 include:
Reclosable bags or envelopes.
Point of purchase displays and mounting promotional items.
Core starting and end tabbing of papers, foils, and films.
Removable stickers and labels and bottle outsert attachment.
Removable/changeable advertisements.
Book inserts.
Temporary hold for protective packaging material, such as foam or cardboard, used during shipment of manufactured goods.
Attaching microscope slides to holder.
Removable/changeable foam gasketing.
- JVCC BST-24 Bag Sealing Tape
JVCC BST-24 Bag Sealing Tape is used to seal polyethylene and other film bags swiftly and efficiently when used in a bag sealing dispenser. Also used for color coding age of perishables. JVCC BST-24 is a UPVC film coated with a solvent based natural rubber adhesive. Typical bags that can be sealed include produce bags, bakery products, candy items, floral arrangements, industrial parts, newspapers and hardware. It is also printable.
- PrimeTac MS-BW Mini Stretch Banderwrap Stretch Film
PrimeTac Mini Stretch Banderwrap Stretch Film is a 5-inch wide hand film wound on 3-inch cores. The film clings to itself so unlike adhesive tape there is no residue left when it is removed. Rolls are lightweight. PrimeTac Mini Stretch is used for palletizing, wrapping, and bundling of boxes, furniture and carpeting. Applications include distribution; moving & storage; and it is great for combining items for freight consolidation. NOTE: one handle (shown in the photo) ships with each full case order. A handle does NOT ship with individual roll orders.
- JVCC V-DCD Vinyl Dots On A Roll
JVCC V-DCD Vinyl Dots On A Roll are SPVC vinyl die cut dots on a pressure-sensitive adhesive roll. Used for aisle marking, color coding, inventory identification, defect marking, and numerous other applications. Made of durable vinyl construction so product is waterproof and can withstand heavy traffic.
For the 1/2, 3/4 and 1 inch dots there are 1,000 dots on a roll and all other sizes have 500 dots on a roll.
- Scapa S305 Double Coated Removable/Permanent Tape
Scapa Dublfilm® S305 Double Coated Removable/Permanent Tape is a polyester film, differentially double coated with a removable acrylic pressure sensitive adhesive (low tack) on the liner side, and a high-performance, permanent rubber adhesive (high tack) on the exposed side. Scapa S305 is ideal for temporary bonding applications such as protective padding and temporary labels and decals. Smooth and easy to use, S305 removes cleanly from metals, glass, high gloss paint systems, and other surfaces while providing excellent heat resistance and aging properties. Scapa S305 applications include: laminate to foams and felts for protective pads; temporary mounting of art work; temporary labels and decals; temporary protective packaging. The tape's polyester film carrier adds dimensional strength and stability. The product is supplied with a 60# tan polycoated release liner.
The liner side is the tape which is exposed once you remove the liner and the exposed side is the tape visible once you unwind it from the roll. Also please note that the removability property does not apply to aluminum surfaces.
- JVCC OPP-26C Premium Grade Colored Packaging Tape
JVCC OPP-26C Premium Grade Colored Packaging Tape consists of a high quality solvent-based acrylic adhesive and a strong film which makes this tape an excellent choice for demanding carton sealing, splicing and color coding applications. Extra thickness allows for one strip sealing which provides for a cleaner look when applying colored tape. The tape comes in 5 translucent colors so for the lighter colors objects can be seen underneath.
- JVCC PTFE-5 Skived Teflon Tape (5 mil)
JVCC PTFE-5 Skived Teflon Tape is a 5 mil pure skived TeflonTM (PTFE film) tape with a high temperature silicone adhesive. It comes self-wound without a liner. Used in electrical applications such as harness / coil wraps & separators, transformers and slot liners where good insulation and heat resistance are required. Also used in mechanical applications such as heat sealing bars & jaws, labeling machine pressure pads, chute liners, anti-friction devices, bearings, forming dies, aircraft mold release & guide rails where high temperature, maximum slip and lubricity are required. High elongation of PTFE-5 permits tight wrapping and conforms to sharp bends/irregular surfaces.
Image does not show a full 36 yard roll.
- JVCC BST-22 Bag Sealing Tape
JVCC BST-22 Bag Sealing Tape is a UPVC film coated with a solvent based natural rubber adhesive. It is used for bag sealing, produce packaging, can sealing and bundling. The tape is also printable.
- JVCC UHMW-PE-20 UHMW Polyethylene Film Tape (20 mil)
JVCC UHMW-PE-20 UHMW Polyethylene Film Tape is a 20 mil ultra high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock absorbing properties. Outwears Teflon™ many times and is a good replacement when high temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Wound on a blue poly liner.
Image does not show a full 18 yard roll.
- JVCC DC-1503 Double Coated Film Tape (Rubber Adhesive)
JVCC DC-1503 Double Coated Film Tape is a clear BOPP (polypropylene) film tape with a synthetic hot melt rubber adhesive on a gold siliconized liner. Used for core start-ups, splicing, holding, joining, attaching, mounting, and laminating applications. Good tack on flat surfaces.
- JVCC PTFE-GC-5 Teflon Glass Cloth Tape (4.6 mil)
JVCC PTFE-GC-5 Teflon Glass Cloth Tape is a 4.6 mil TeflonTM (PTFE) impregnated fiberglass cloth, consisting of warp and fill yarns, and coated with a high temperature silicone adhesive. It offers excellent electrical, mechanical and chemical properties. Used as a primary insulation/protective barrier in a variety of electrical equipment and heat sealing bars, chute liners, gaskets, bearing surfaces, tabletop covers, guide rails and roll covers. The tape has a low friction surface and is abrasion resistant. It comes either self-wound without a liner or with a release liner (please note though that the 1/2 and 3/4 inch width sizes can only come self-wound).
Image does not show a full 36 yard roll.
- JVCC PTFE-10 Skived Teflon Tape (10 mil)
JVCC PTFE-10 Skived Teflon Tape is a 10 mil pure skived TeflonTM (PTFE film) tape with a high temperature silicone adhesive. It comes self-wound without a liner. Used in electrical applications such as harness / coil wraps & separators, transformers and slot liners where good insulation and heat resistance are required. Also used in mechanical applications such as heat sealing bars & jaws, labeling machine pressure pads, chute liners, anti-friction devices, bearings, forming dies, aircraft mold release & guide rails where high temperature, maximum slip and lubricity are required.
Image does not show a full 18 yard roll.
- JVCC PTFE-GC-6 Teflon Glass Cloth Tape (5.4 mil)
JVCC PTFE-GC-6 Teflon Glass Cloth Tape is a 5.4 mil TeflonTM (PTFE) impregnated fiberglass cloth, consisting of warp and fill yarns, and coated with a high temperature silicone adhesive. It offers excellent electrical, mechanical and chemical properties. Used as a primary insulation/protective barrier in a variety of electrical equipment and heat sealing bars, chute liners, gaskets, bearing surfaces, tabletop covers, guide rails and roll covers. The tape has a low friction surface and is abrasion resistant. It comes either self-wound without a liner or with a release liner (please note though that the 1/2 and 3/4 inch width sizes can only come self-wound).
Image does not show a full 36 yard roll.
- JVCC DC-PETF35-R Double Coated Red Film Tape (Acrylic Adhesive)
JVCC DC-PETF35-R Double Coated Film Tape is a polyester film coated on both sides with an aggressive high performance pure solvent based red acrylic adhesive. Used for splicing paper, corrugated paper, plastics, films, foils, and other continuous web processes when a visual splice is critical. The tape has high tack, adhesion and shear strength an also has excellent low and high temperature resistance. The tape comes with a white
siliconized paper release liner.
Image does not show a full 60 yard roll.
- JVCC PTFE-GC-10 Teflon Glass Cloth Tape (9.1 mil)
JVCC PTFE-GC-10 Teflon Glass Cloth Tape is a 9.1 mil TeflonTM (PTFE) impregnated fiberglass cloth, consisting of warp and fill yarns, and coated with a high temperature silicone adhesive. It offers excellent electrical, mechanical and chemical properties. Used as a primary insulation/protective barrier in a variety of electrical equipment and heat sealing bars, chute liners, gaskets, bearing surfaces, tabletop covers, guide rails and roll covers. The tape has a low friction surface and is abrasion resistant. It comes either self-wound without a liner or with a release liner (please note though that the 1/2 and 3/4 inch width sizes can only come self-wound).
Image does not show a full 36 yard roll.
- JVCC PTFE-GC-3 Teflon Glass Cloth Tape (2.8 mil)
JVCC PTFE-GC-3 Teflon Glass Cloth Tape is a 2.8 mil TeflonTM (PTFE) impregnated fiberglass cloth, consisting of warp and fill yarns, and coated with a high temperature silicone adhesive. It offers excellent electrical, mechanical and chemical properties. Used as a primary insulation/protective barrier in a variety of electrical equipment and heat sealing bars, chute liners, gaskets, bearing surfaces, tabletop covers, guide rails and roll covers. The tape has a low friction surface and is abrasion resistant. It comes either self-wound without a liner or with a release liner (please note though that the 1/2 and 3/4 inch width sizes can only come self-wound).
Image does not show a full 36 yard roll.
- JVCC DC-1114 Double Coated Film Tape (Rubber Adhesive)
JVCC DC-1114 Double Coated Film Tape is a clear thin polyester film coated with an aggressive synthetic hot melt rubber adhesive and wound on a 2.7 mil white siliconized paper release liner. It offers superior moisture resistance in humid conditions once bonded. JVCC DC-1114 double-sided film tape has excellent quick-stick properties and offers moderate temperature resistance. Perfect for splicing of papers, plastics, films, foils, etc. Used in general purpose bonding, mounting, and laminating applications (nameplates, mouse pad assembly, etc.). The tape has an environmentally friendly solventless adhesive and is RoHS compliant.
- JVCC GLW-24 Ultra Premium Glow in the Dark Tape
JVCC GLW-24 Ultra Premium Glow in the Dark Tape is a flexible polyester laminated photoluminescent film tape with a permanent adhesive on one side. The photoluminescent pigments absorb and store energy from normal, ambient light. In sudden darkness the tape is immediately visible. The tape provides a non-electric safety marking system that easily and inexpensively affixes to walls, handrails, columns, around door frames, and along stairways and baseboards (provides visibility during an emergency). It is wound on a liner for easy handling. Also used for identification of critical equipment controls, exit and directional signage (especially for escape routes and stairways), light switch covers, labels, decals, novelties, sporting goods, trims and special effects. Used in hotels, hospitals, schools, public facilities, office buildings and manufacturing plants.
JVCC GLW-24 Ultra Premium Glow Tape is fully charged within 30 minutes after exposure to either artificial or natural light and glows brightest the first 15 to 30 minutes after activation has ceased, but will remain clearly visible in a totally dark room to the night-adjusted eye for up to 24 hours (to the night-adjusted eye it is visible, but it would not compare it brightness to say a standard flashlight). It also recharges. The tape has excellent UV stability and does not show significant degradation when used outdoors. The luminescent system used is non-radioactive and non-toxic. The tape is offset, screen, flexo, and thermo transfer printable. Adhesive has a 24 hour dwell time.
- Shurtape PE-555 Premium Polyethylene Film Tape (UV resistant)
Shurtape PE-555 Premium Polyethylene Film Tape is a 9 mil UV resistant waterproof film tape used to mask window and door frames during stucco application and wood, metal, vinyl, and tile during painting. Multi-purpose tape used for surface protection, color coding, splicing, and seaming on pipe fitting covers. Shurtape PE-555 has excellent tear characteristics and well as adhesion.
- JVCC UHMW-PE-5 UHMW Polyethylene Film Tape (5 mil)
JVCC UHMW-PE-5 UHMW Polyethylene Film Tape is a 5 mil ultra high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock absorbing properties. Outwears Teflon™ many times and is a good replacement when high temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Meets automotive specs: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M. Wound on a white paper liner.
Image does not show a full 36 yard roll.
- JVCC V-36P-EM Premium Embossed Stucco Masking Vinyl Tape
JVCC V-36P-EM Premium Embossed Stucco Masking Vinyl Tape is an embossed silver vinyl tape which is used to mask windows and doors in stucco applications. Unlike traditional vinyl tapes it is hand-tearable.
- JVCC V-DCA Vinyl Arrows On A Roll
JVCC V-DCA Vinyl Arrows On A Roll are SPVC vinyl die cut arrows on a pressure-sensitive adhesive roll. Used for aisle marking, color coding, inventory identification, defect marking, and numerous other applications. Made of durable vinyl construction so product is waterproof and can withstand heavy traffic. The arrows are dimensionally square so a 1 inch size arrow would be 1 inch wide by 1 inch long.
For the 1 inch arrows there are 1,000 arrows on a roll and all other sizes have 500 arrows on a roll.
- JVCC UHMW-PE-10 UHMW Polyethylene Film Tape (10 mil)
JVCC UHMW-PE-10 UHMW Polyethylene Film Tape is a 10 mil ultra high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock absorbing properties. Outwears Teflon™ many times and is a good replacement when high temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Meets automotive specs: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M. Wound on a white paper liner.
Image does not show a full 36 yard roll.
- JVCC EGPF-02 Kapton Polyimide Film Tape (2 mil)
JVCC EGPF-02 Kapton™ Polyimide Film Tape is a 2 mil electrical grade POLYIMIDE film coated with a high performance silicone adhesive. It is a wave solder/hot air leveling tape used to protect gold contacts from molten solder during hot air wave solder leveling process. It is thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures. Adhesive will thermoset to increase adhesion values. Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects. Permits observation of board during processing. EGPF-02 Kapton Electrical Grade/Printed Circuit Polyimide Film Tape has excellent resistance to acids, oils, solvents, aging, staining and water immersion.
- JVCC DC-4110R/P Double Coated Removable/Permanent Tape (Acrylic Adhesive)
JVCC DC-4110R/P Double Coated Removable/Permanent Tape is a clear polyester film differentially coated with a removable (low tack) and permanent (high tack) acrylic adhesive system.
The liner side (the tape exposed once you remove the liner) is coated with a controlled low tack, highly removable clear adhesive system which exhibits moderate adhesion to a variety of surfaces, but has excellent removability. The exposed side (the tape visible once you unwind it from the roll) is coated with an aggressive, high tack, high peel, high shear, permanent clear acrylic adhesive.
Both adhesives are excellent in low and moderate temperatures and are resistant to UV, moisture, some solvents, mild acids, oil and grease. JVCC DC-4110R/P double-sided removable/permanent tape is latex-free and has excellent adhesion to metals, glass, films, paper and some treated polyolefins. For manufacturing reclosable bags/pouches/envelopes; core start ups; end tabbing paper/foils/films; mounting promotional, advertising and point of purchase displays that can be removed/replaced/repositioned; temporary holding of packaging/protective materials during shipment; temporary laminating applications; making removable stickers and labels.
- JVCC EGPF-01 Kapton Polyimide Film Tape (1 mil)
JVCC EGPF-01 Kapton™ Polyimide Film Tape is a 1 mil electrical grade POLYIMIDE film coated with a high performance silicone adhesive. It is a wave solder/hot air leveling tape used to protect gold contacts from molten solder during hot air wave solder leveling process. It is thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures. Adhesive will thermoset to increase adhesion values. Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects. Permits observation of board during processing. EGPF-01 Kapton Electrical Grade/Printed Circuit Polyimide Film Tape has excellent resistance to acids, oils, solvents, aging, staining and water immersion.
- Shurtape JLAR Clear to the Core Tape (Permacel J-LAR)
Shurtape JLAR Clear to the Core Tape is a glossy, brilliantly clear film tape designed expressly for light packaging, gel and book repair, paper repair/mending, and holding applications. Typical applications include overlamination, label protection and light carton closure. Will not yellow with age nor discolor packages or objects after being applied. Ideal for use with counter and desk dispenser units. Stronger than cellophane or acetate. Permacel J-LAR is now manufactured by Shurtape.
- JVCC DC-PPF22 Double Coated Film Tape (Acrylic Adhesive)
JVCC DC-PPF22 Double Coated Film Tape is a high performance transparent Polypropylene (PP) film coated on both sides with an age resistant solvent-based acrylic adhesive. Extremely aggressive (ensuring permanency of the bond) even when exposed to the elements. Bonds well to nearly all materials. Used for mounting plastic and wooden trims, fabrication of heavy decorative materials and displays, mounting of transparent signs and scales, bonding vinyl decals, and the attachment of plastic corner guards or extrusions. Both static and dynamic shear resistance is excellent.
- JVCC CST-2H Clear Stationery Tape
JVCC CST-2H Clear Stationery Tape is a 2 mil thick clear polypropylene office supply desk tape which has a water-based acrylic adhesive. The tape is hand-tearable.
- JVCC IMT-2H Invisible Mending Tape
JVCC IMT-2H Invisible Mending Tape is a 2 mil thick write-on translucent frosty-white invisible mending tape. It has a specially treated matte finish polypropylene film coated with a solvent-based acrylic adhesive. It is hand-tearable and non-glare. Cases are sub-packed (packs of 12 rolls for 1/2 inch width and 8 rolls for 3/4 inch width).
- JVCC DVT-76 Dry Vinyl Tape
JVCC DVT-76 Dry Vinyl Tape is a NON-ADHESIVE plasticized polyvinyl chloride film tape. Easy unwinding characteristics - tape clings firmly to its own backing for tight wrap. High elongation and good strength to permit trouble-free binding of wire harnesses for the automotive industry. Dry Vinyl Tape is also used for plating applications - hight stretch, good "cling" characteristics and great conformability provide for superior masking in hard chrome and other plating applications.
- JVCC DC-4408SW Double Coated Differential Tape (Linerless)
JVCC DC-4408SW Double Coated Differential Tape (Linerless) is a self-wound transparent PVC film, differentially coated with a high tack/low tack acrylic adhesive system for a smooth and easy unwind. Especially suited for applications where a liner would be a hindrance. JVCC DC-4408SW is used for bag sealing; core start-ups; splicing of plastics, metal foils, paper and cardboard. Its differential adhesive system makes this tape ideal as a closure system for thin film bags. Also used for mounting in the graphic arts industry.
- Scapa 1250 CrystalClear Transparent Film Tape
Scapa 1250 CrystalClear™ Transparent Film Tape is an ultra clear polypropylene film with a non-yellowing acrylic adhesive. It is used for overlaminating film for labels and prints and for splicing. Scapa 1250 Film Tape is excellent for use as gel repair and book repair tape. Features include:
low unwind force for easy handling
UV resistant
non-yellowing adhesive
polypropylene carrier is stable and long lasting
non-staining tape in the textile industry
NOTE: Scapa 1250 is no longer stocked. Please see JVCC BOOK-20CC or Permacel J-LAR for a similar tape.
- Scapa 702 Double Coated Silicone Tape
Scapa 702 Double Coated Silicone Tape is a polyester film coated on both sides with a silicone pressure sensitive adhesive. Used for splicing of silicone coated papers and films. Bonds silicone substrates and many other difficult to bond surfaces. Scapa 702 provides excellent quick-stick and strong holding power. Bonds silicone foams and gaskets for automotive and industrial applications, high or low temperature gasket sealing, can be die-cut for precision parts. Wound on a specially treated polyester film liner which allows for easy unwind. Bonds over a wide operating temperature range and resistant to many chemicals.
NOTE: We have received in some 702 material from Scapa that is double-linered so if you'd rather your rolls ship with release liners on both sides of the tape instead of just one please reply back to the order confirmation email that you'll receive asking that your rolls be cut from that material instead.
- JVCC DC-4420 Double Coated White PVC Tape
JVCC DC-4420 Double Coated PVC Tape is a white PVC film coated on both sides with a solvent based acrylic adhesive. On a gold siliconized paper liner. The adhesive system of this two-sided tape is aggressive and will bond to nearly all materials (even on difficult surfaces like foams, PE and PP films). It has excellent temperature, UV, aging, and water vapor resistance. Used for bonding rubber, plastic, metal, and wood substrates. Also for permanent mounting of nameplates and decorative trim on appliances and furniture.
If you are looking for single rolls of a double-sided white PVC tape please see JVCC DC-WPVC98.
- Sigma Extended Core Stretch Film
Sigma Extended Core Stretch Film is a premium grade, cast co-extruded hand film wound on 1-1/4" cores with 5" application handles. Sigma Extended Core rolls are lightweight and easy to use in tight spaces. No dispensers are required. Loads get wrapped quicker with fewer trips around the pallet. Sigma Stretch Film is used for palletizing, wrapping, and bundling of boxes, furniture and carpeting. Industry use includes distribution, moving and storage, transportation and boxed products. Made in the U.S.A.
- Scapa 627 Non-Silicone Splicing Tape
Scapa 627 Non-Silicone Splicing Tape is a polyester film, single coated with an aggressive acrylic adhesive. Used for splicing of non-silicone surfaces and seam sealing (e.g. one common use is to seal seams of Tyvek to help provide a barrier against air coming in through seams of house wrap). Comes with serrated/pinked edges for easy hand tearing. Its aggressive, tacky adhesive aides in splicing to various non-silicone surfaces and its printable PET carrier adds dimensional stability and strength. It has excellent balance of tack, peel and tensile strength, maintains adhesion at low temperatures, and exhibits excellent aging and weathering properties.
- ISC Helicopter-IG Surface Guard Tape (Indoor Grade)
ISC Helicopter-IG Surface Guard Tape (Indoor Grade) is an extremely tough conformable polyurethane tape which was formerly referred to as helicopter/leading edge tape. It provides excellent paint protection from punctures, tearing, abrasion and erosion and is available in an indoor grade or an outdoor grade. Indoor grade can be used anywhere it will not be directly exposed to ultra violet light (the sun). If exposed to sun light, it may yellow over time. Outdoor grade provides excellent protection against ultra violet light, temperature extremes and automotive solvents. Outdoor grade will not yellow over time.
Be sure to take note that ISC Surface Guard Tape is made of Polyurethane material not PVC or Vinyl. These other types cannot, and will not, take the abuse that Polyurethane will.
Applications for the surface protection tape are endless and include: bicycle frames, body panels on race cars, ground effects, top fuel wings, bumpers, tailgates, trailer walls, Sprint car wings, roll cages, toolboxes, headlights, wheel wells, truck beds, and door and hood edges.
Anywhere there is a surface, unpainted or painted, that is prone to scratching, chipping or weathering, ISC's Surface Guard Tape can do the job.
Super tough film requires razor knife or scissors for cutting.
Supplied on 92 lb. easy release polycoated liner.
Requires no heat or solvent to activate.
- Scapa 571 Silicone Splicing Tape
Scapa 571 Silicone Splicing Tape is a thin polyester film, single-coated on one side with a custom-formulated silicone pressure sensitive adhesive (opposite side of the film utilizes a standard non-silicone coating). The silicone adhesive provides high initial tack and ensures an excellent bond to silicone coated substrates. This shear-resistant product is pink to enable prompt splice identification and has a soft, conformable adhesive that adheres well to irregular surfaces. It is used for splicing of silicone release papers, films, and other substrates; general-purpose bonding; high-temperature masking; and chemical masking.
Scapa 571 features include:
Excellent adhesion to silicone coated substrates.
High initial tack which insures a good bond.
Conforms to achieve good contact to surfaces being spliced.
High shear resistance for a strong bond.
Color of tape enables prompt splice identification.
Is resistant to many chemicals.
- JVCC DC-4414W Double Coated PVC Film Tape
JVCC DC-4414W Double Coated PVC Film Tape is a white PVC film coated on both sides with a solvent based acrylic adhesive. Extremely aggressive adhesive will bond to nearly all materials (has just one minute dwell time). Has excellent temperature, UV, aging, and water vapor resistance. Comes on a gold siliconized paper release liner. JVCC DC-4414W double-sided tape is used for secure attachment of extruded plastic profiles in furniture and general industries and to mount signs and large format graphics. Also recommended for bonding trims in automotive and other industries.
- JVCC 211 Polyethylene Film Tape
JVCC 211 Polyethylene Film Tape is a polyethylene general purpose film tape for splicing, patching, sealing, tabbing and holding. Polyethylene Film Tape is also used for floor marking, convention center booth marking, packaging, and seaming polyethylene sheeting.
NOTE: No inventory remains for JVCC 211. Please see Scapa 136 as an alternative.
- JVCC DC-1109R/P Double Coated Removable/Permanent Tape (Rubber Adhesive)
JVCC DC-1109R/P Double Coated Removable/Permanent Tape is a clear polyester film differentially coated with a removable (low tack) and permanent (high tack) synthetic rubber adhesive system. The liner side (the tape exposed once you remove the liner) is coated with a controlled low tack, highly removable clear adhesive system which exhibits moderate adhesion to a variety of surfaces, but has excellent removability. The exposed side (the tape visible once you unwind it from the roll) is coated with an aggressive, high tack, clear synthetic copolymer adhesive which forms a long-term bond immediately upon contact.
JVCC DC-1109R/P double-sided removable/permanent tape complies with the FDA Code of Regulations Title 21, Part 175, Subpart B, Section 175.105 which covers the use of adhesive tapes for indirect food contact.
NOTE: this tape is no longer being manufactured, and limited inventory remains. Replacement tapes include JVCC DC-4110R/P and Scapa S305.
- JVCC DCF-01 Double Coated Film Tape
JVCC DCF-01 Double Coated Film Tape is a two-sided polyester film tape with an acrylic adhesive for use in the graphic arts industry for nameplates, decals, and general purpose bonding. It comes on a release liner. JVCC DCF-01 is also used for the splicing.
NOTE: this tape is no longer being manufactured, replacement JVCC tapes include DC-4109RS, DC-1503, and DC-1114.
- JVCC PF-9R Polyethylene Film Tape
JVCC PF-9R Polyethylene Film Tape is low density polyethylene film tape coated on one side with a synthetic rubber-based adhesive. It remains tacky and bonds well to most surfaces over a wide range of temperatures (it has an excellent low temperature bond). JVCC PF-9R's tough polyethylene backing offers good abrasion and tear resistance. It is also highly conformable, waterproof and resistant to chemical deterioration. Applications for PF-9R include: polyethylene splicing; patching/repairing poly sheeting used in boating and RV industry; surface protection & electroplate masking; wire identification; and packing. Works well in most applications where a low thread count polyethylene coated cloth tape is being used.
NOTE: This item is no longer carried. Please see Scapa 136 for currently stocked colored polyethylene film tape.
- Polyken 832 Polyethylene Film Tape
Polyken 832 Polyethylene Film Tape is a polyethylene film tape with UV resistant acrylic adhesive. It is used on glass and Plexiglas for clean removal. It is also used in abatement processes and as a protective tape. Polyken 832 is UV resistance which allows for outdoor use.
- JVCC OPP-22CC Crystal Clear Packaging Tape
JVCC OPP-22CC Crystal Clear Carton Sealing Tape is a 2.2 mil biaxially oriented polypropylene film tape coated with a solvent based acrylic adhesive. See-through "CRYSTAL CLEAR" imprinted on 3" core. Crystal clear tape is non-yellowing and UV resistant with a long shelf life. Used for carton sealing. May also be used for lamination and in cold temperature applications.
