DAP Concrete Crack Filler
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
BACKORDER NOTE *** you can choose to be notified via text when an item is back in stock
Item is expected in approximately 14 day(s)
DAP Concrete Crack Filler is a one-of-a-kind, water activated dry powder that creates a seamless repair in one-pass. Ready-to-use; no shaking or mixing required. Once applied & dampened it hardens to permanently fill & repair cracks. Fixes cracks in concrete sidewalks & driveways, patio pavers, landscaping stones, ceramic tiles, cement blocks or bricks. Resists UV fading, cracking & shrinking. The low dust, easy to pour formula effectively fills horizontal cracks for a fast & easy repair. To use, prep surface, fill crack, level & mist. Use as is. DO NOT mix with other products. Interior/Exterior use.
Features & Benefits
- Ideal for horizontal cracks in concrete, stone & other masonry materials.
- Repairs cracks up to 1/2 in. W x 1/2 in. D in a single pass.
- Light foot traffic ready in 4 hours.
- Strong and durable repair.
- Resistant to shrinkage, UV fading, & cracking.
- Low dust, no odor.
- Easy clean-up.
Country of Origin: United States.
DAP Concrete Crack Filler
- Consistency: Dry powder
- Base Polymer: Advanced acrylic polymer
- Shelf Life: 3 years
- Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.
7079860500 Standard sizes
|ITEM SIZE||ITEM #
||ITEMS PER CASE
||PRICE PER ITEM
||PRICE PER CASE
16.0 fl. oz. (1.62 lb.)
UPC = 070798605008
Single Item (1-5 Items)
1 - 4 Cases (6-29 Items)
5 - 9 Cases (30-59 Items)
10+ Cases (>= 60 Items)
a 8% discount
a 9% discount
a 11% discount
Question & Answers
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils